Product Overview
This Kircuit AC/DC adapter is designed to provide reliable power to your compatible devices. It converts standard AC power from an electrical outlet into the DC power required by your device. This adapter is suitable for use as a replacement or a travel backup power source.
It features built-in dynamic IC, charger IC, and power fuse for rapid charging and protection against overcharge.
Compatibility: Wavlink WN531AX2, WL-WN531AX2, LUX DX4 Wi-Fi 6 AX1800 Dual Band Smart Touchlink Mesh Routers.
Setup Instructions
- Inspect the Adapter: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Insert the DC barrel connector of the adapter firmly into the power input port of your compatible Wavlink router.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard electrical wall outlet (100V-240V AC). Ensure the outlet is easily accessible.
- Verify Power: Once connected, your device should power on or begin charging, indicated by its power indicator light.
Image: The Kircuit AC/DC adapter connected to a power strip, ready to power a device. This illustrates a typical setup scenario.
Operating Instructions
Once properly connected, the adapter will automatically supply power to your device. No further user interaction is required for basic operation.
- Ensure the adapter is placed in a well-ventilated area to prevent overheating.
- Avoid covering the adapter during operation.
- Disconnect the adapter from the power outlet when not in use for extended periods.
Maintenance and Care
- Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid tightly winding the cable to prevent damage.
- Handling: Do not drop, disassemble, or attempt to repair the adapter yourself. This can cause damage and void any potential warranty.
- Cable Protection: Avoid placing heavy objects on the power cord or bending it sharply, as this can damage the internal wires.
Image: A Kircuit AC/DC adapter with its attached power cord, highlighting the cable length for proper placement and care.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on/charging. | Adapter not properly connected. Power outlet is not active. Device issue. | Ensure both ends of the adapter are securely plugged in. Test the power outlet with another device. Verify the device itself is functional. |
| Adapter feels hot. | Normal operation heat. Poor ventilation. Overload. | A slight warmth is normal. Ensure adapter is in a well-ventilated area. Disconnect if excessively hot and check device power requirements. |
| Sparking when plugging in. | Normal inrush current. Faulty outlet/adapter. | A small spark is common. If sparking is excessive or continuous, discontinue use and consult a qualified electrician or replace the adapter. |
Specifications
- Brand: Kircuit
- Input Voltage: 100-240V AC
- Input Frequency: 50/60Hz
- Connector Type: Barrel
- Compatible Devices: Wavlink WN531AX2, WL-WN531AX2, TOUCHLINK
- Special Feature: Built-in Dynamic IC, Charger IC & Power fuse for rapid charging and overcharge protection.
- Color: Black
- Power Source: Corded Electric
Image: Two Kircuit AC/DC adapters, illustrating the compact design and label with technical specifications.
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. The manufacturer is Shenzhen Waweis Technology Co., Ltd.
This product is designed to meet the power needs of your device and has been validated and tested to ensure compatibility.
Date First Available: April 26, 2024
