Braun Series 8 Pro 8513s Electric Shaver Instruction Manual

1. Introduction

Thank you for choosing the Braun Series 8 Pro 8513s Electric Shaver. This manual provides essential information for the safe and effective use, maintenance, and care of your new shaver. Please read these instructions thoroughly before first use and keep them for future reference.

The Braun Series 8 Pro 8513s is engineered for a superior close shave and skin comfort, even on dense beards. It features 4 sonic-powered shaving elements and a compact 40-degree swiveling head that adapts to facial contours, delivering a gentle shave down to 0.05mm. The integrated ProTrimmer offers ultimate precision for longer hairs and detailing.

Image 1.1: The Braun Series 8 Pro 8513s Electric Shaver, highlighting its durable construction and German engineering.

2. Safety Information

To reduce the risk of electric shock, injury, or damage to the appliance, please observe the following safety instructions:

• This appliance is suitable for cleaning under running water. Disconnect the shaver from the power supply before cleaning with water.
• Do not use the appliance with a damaged foil or cord.
• Keep the appliance dry. Do not immerse the charging stand in water.
• This appliance is equipped with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.
• For hygienic reasons, do not share this appliance with other persons.

3. Package Contents

Carefully unpack your Braun Series 8 Pro 8513s Electric Shaver and verify that all components are present:

• Braun Series 8 Pro 8513s Electric Shaver
• Charging Stand
• Power Adapter (SmartPlug)
• Travel Case
• Cleaning Brush

Image 3.1: All components included with the Braun Series 8 Pro 8513s Electric Shaver.

4. Setup

4.1 Charging the Shaver

1. Connect the SmartPlug to the charging stand or directly to the shaver.
2. Plug the SmartPlug into an electrical outlet.
3. Place the shaver in the charging stand or connect it directly to the SmartPlug. The battery indicator will show the charging status.
4. A full charge provides up to 60 minutes of cordless shaving. A 5-minute quick charge is sufficient for one shave.

4.2 Initial Use

Before your first shave, ensure the shaver is fully charged. It is recommended to allow your skin to adapt to the new shaver by using it daily for a few weeks.

5. Operating Instructions

5.1 Shaving

The Braun Series 8 Pro 8513s can be used for both dry and wet shaving.

1. Dry Shaving: Ensure your face is clean and dry. Turn on the shaver.
2. Wet Shaving: Apply shaving foam or gel to your face. The shaver is 100% waterproof and can be used under the shower.
3. Move the shaver against the direction of hair growth, holding it at a right angle (90°) to your skin. Apply gentle, even pressure.
4. The 40° swiveling head and Sonic Technology adapt to your facial contours, capturing more hair with each stroke.

Image 5.1: Demonstrating the close and gentle shaving experience with the Braun Series 8 Pro 8513s.

Image 5.2: Detail of the 4 sonic-powered shaving elements designed for efficient hair capture.

5.2 Using the ProTrimmer

The integrated ProTrimmer is ideal for shaping sideburns, moustaches, and for trimming longer hairs before shaving.

1. To activate the ProTrimmer, slide the precision switch upwards. This locks the shaver head for precise control.
2. Use the trimmer to define lines or reduce the length of longer hairs.
3. After use, slide the precision switch back down to unlock the shaver head.

Image 5.3: The ProTrimmer in action, providing ultimate precision for detailing.

6. Maintenance

6.1 Cleaning the Shaver

Regular cleaning ensures optimal shaving performance and hygiene.

1. Quick Cleaning (after each shave): Turn off the shaver. Rinse the shaver head under hot running water until all residue is removed. You can use liquid soap without abrasive particles.
2. Thorough Cleaning (weekly): Remove the shaver head. Tap out any loose hair. Use the provided cleaning brush to clean the inner parts of the shaver head and the shaver body. Do not use the brush on the foil itself, as this can damage it. Rinse thoroughly under running water.
3. Allow the shaver head to air dry completely before reattaching or storing.

6.2 Replacing Shaver Parts

To maintain 100% shaving performance, replace the shaver head (foil and cutter block) every 18 months, or when worn. Replacement parts are available from Braun retailers or service centers.

Image 6.1: An exploded view illustrating the four perfectly synchronized shaving elements of the Series 8.

7. Troubleshooting

• Shaver does not turn on: Ensure the battery is charged. Connect the shaver to the power adapter and try again.
• Reduced shaving performance: Clean the shaver head thoroughly. The shaver head might be worn; consider replacing it (recommended every 18 months).
• Battery not charging: Check if the power adapter is correctly plugged into the shaver/charging stand and the electrical outlet. Ensure the contacts on the shaver and charging stand are clean.
• Skin irritation: Ensure your skin is clean before shaving. Use gentle pressure. If wet shaving, ensure sufficient foam/gel. Allow your skin to adapt to the new shaver over a few weeks.

8. Specifications

9. Warranty and Support

This Braun product comes with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Braun website. For technical support, replacement parts, or service, please contact Braun customer service or an authorized service center in your region.