VINGLI Wooden Rocking Chair Instruction Manual

Introduction

Thank you for choosing the VINGLI Wooden Rocking Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new rocking chair. Please read these instructions carefully before assembly and retain them for future reference.

This rocking chair is designed for comfort and durability, suitable for both indoor and outdoor use. It features a high back, wide armrests, and a smooth rocking motion for relaxation.

Image: The VINGLI Wooden Rocking Chair in white, showcasing its classic design.

Safety Information

WARNING:

• This product has a maximum weight capacity of 450 LBS. Do not exceed this limit.
• Improper assembly may lead to instability and potential injury. Always ensure the product is fully assembled and stable before use.
• Avoid using the chair near stairs, edges, or other hazardous areas where tipping could occur.
• Regularly inspect the product for any signs of wear or damage that could affect its stability or safety. Discontinue use if damage is found and contact customer support.
• Care should be taken to avoid tipping while seated.

Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact VINGLI customer service. Refer to the assembly video for a visual guide to the parts.

The assembly video details the following components:

• Backrest (A)
• Left Armrest Assembly (B)
• Right Armrest Assembly (C)
• Seat (D)
• Top Backrest Piece (E)
• Lower Crossbars (F)
• Middle Crossbar (G)
• Rockers (H)
• Hardware: Screws (AA), Screw Caps (BB), Allen Wrench (CC), Longer Screws (DD)

Assembly Instructions

Assembly is designed to be straightforward. Please follow these steps carefully. An assembly video is provided below for visual guidance.

1. Step 1: Attach Rockers to Side Frames

   Connect the rockers (H) to the bottom of the left (B) and right (C) armrest assemblies using the provided screws (DD). Ensure they are securely fastened.

2. Step 2: Assemble Backrest

   Attach the top backrest piece (E) to the main backrest (A). Secure with screws.

3. Step 3: Attach Backrest to Side Frames

   Connect the assembled backrest (A and E) to the rear posts of the left (B) and right (C) armrest assemblies. Use screws (AA) to secure.

4. Step 4: Install Seat and Crossbars

   Place the seat (D) onto the designated supports between the armrest assemblies. Insert the lower crossbars (F) and the middle crossbar (G) into their respective slots. Secure all components with screws (AA).

5. Step 5: Final Tightening and Caps

   Ensure all screws are tightened securely. Cover exposed screw heads with the provided screw caps (BB) for enhanced aesthetics and protection against rust.

Once assembled, gently test the chair for stability before full use.

Product Features

The VINGLI Wooden Rocking Chair is designed with several features to enhance your comfort and the product's longevity:

• Solid Wood Durability: Crafted from real wood for stability and longevity.
• Ultimate Comfort Design: High back and round, wide armrests provide maximum relaxation. The chair allows a smooth rocking motion of up to 45 degrees.
• Versatile Style: Its elegant design complements various settings, including gardens, balconies, patios, or living rooms.
• Enhanced Aesthetics and Protection: Includes plugs for screw holes to improve appearance and protect screws from rust.

Image: A man relaxing in the rocking chair, illustrating the 45-degree smooth rocking motion for comfort.

Image: A woman seated in the rocking chair, with callouts pointing to the widened seat, high backrest, widened handrail, and feet support frame, emphasizing comfort features.

Usage

The VINGLI Wooden Rocking Chair is suitable for various relaxation purposes. It can be used on patios, balconies, in gardens, or indoors in living rooms. Always ensure the chair is placed on a stable, level surface.

Image: A woman enjoying a book while seated in the rocking chair in a serene garden environment.

Maintenance

To ensure the longevity and appearance of your VINGLI Wooden Rocking Chair, follow these maintenance guidelines:

• Dust Regularly: Use a soft, dry cloth to dust the chair regularly.
• Clean with Damp Cloth: For deeper cleaning, wipe the chair with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Avoid Excessive Moisture: While suitable for outdoor use, prolonged exposure to heavy rain or extreme moisture should be avoided to prevent wood damage. If the chair gets wet, wipe it dry promptly.
• Inspect Periodically: Periodically check all screws and connections to ensure they remain tight. Tighten as necessary.

Specifications

Troubleshooting

If you encounter any issues with your VINGLI Wooden Rocking Chair, please refer to the following common troubleshooting tips:

• Chair feels wobbly after assembly: Ensure all screws are fully tightened. Re-check each connection point according to the assembly instructions.
• Squeaking noise during rocking: Check all joints for tightness. A small amount of lubricant (e.g., silicone spray) can be applied to joints if the noise persists, ensuring it is safe for wood.
• Missing parts: If any parts were missing upon unboxing, please contact VINGLI customer support immediately for replacements.
• Damage during shipping: If the product arrived damaged, document the damage with photos and contact VINGLI customer support for assistance.

Warranty and Support

For warranty information, product support, or to order replacement parts, please contact VINGLI customer service through the retailer where the product was purchased or visit the official VINGLI website. Please have your model number (VL-MYYC) and purchase date available when contacting support.

You can visit the VINGLI store on Amazon for more information: VINGLI Store