1. Product Overview
The VOLT PLUS TECH TG01 Portable Bluetooth Earbuds offer a wireless audio experience with features such as noise cancellation, IPX4 water resistance, and a portable charging case with an LED display. This manual provides instructions for proper use and maintenance.
Image: The TG01 earbuds shown outside their open charging case, which features a digital display.
2. What's in the Box
Please verify that all items are present in the package:
- VOLT PLUS TECH TG01 Portable Bluetooth Earbuds (Left and Right)
- Portable Charging/Storage Case with Loop
- USB-C Charging Cable
- Two (2) Pairs of Earbud Tips (Small, Large)
- User Manual (this document)
3. Setup
3.1 Initial Charging
Before first use, fully charge the earbuds and the charging case. Connect the provided USB-C cable to the charging port on the case and to a compatible USB power source. The intelligent LED display on the charging case will show the current battery level.
Image: The charging case with its LED display showing battery percentage.
3.2 Pairing with a Device
Follow these steps to pair your earbuds with a Bluetooth-enabled device:
- Power On: Remove both earbuds from the charging case. They will automatically power on, indicated by a blue light. Alternatively, press and hold the touch panel on each earbud for 3 seconds to manually power them on.
- Pairing Mode: After powering on, the earbuds will enter pairing mode. You will hear voice prompts, and the indicator lights on both earbuds will flash blue and red alternately.
- Enable Bluetooth: On your mobile device, navigate to the Bluetooth settings and ensure Bluetooth is enabled.
- Search and Connect: Search for available devices and select "TG01" (or similar model name) from the list.
- Confirmation: Once connected, the earbuds will prompt "Connected," and the indicator lights will stop flashing.
Image: Visual guide illustrating the quick pairing process for the earbuds and charging case.
Once successfully connected, your earbuds will automatically connect to the previously paired device when they are turned on and within range, provided the device's Bluetooth is enabled.
4. Operating Instructions
4.1 Power On/Off
- Power On: Remove earbuds from the charging case, or press and hold the touch panel for 3 seconds.
- Power Off: Place earbuds back into the charging case, or press and hold the touch panel for an extended period (refer to specific touch controls for exact duration).
4.2 Touch Controls
The TG01 earbuds feature touch-sensitive controls for various functions:
- Play/Pause: Single tap on either earbud.
- Next Song: Double tap on the right earbud.
- Previous Song: Double tap on the left earbud.
- Volume Up: Triple tap on the right earbud.
- Volume Down: Triple tap on the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call.
- Reject Call: Press and hold on either earbud during an incoming call.
- Activate Voice Assistant: Press and hold on either earbud for 2 seconds.
4.3 Noise Cancellation
The earbuds incorporate CVC 8.0 intelligent noise reduction technology to minimize ambient noise, enhancing audio clarity during calls and music playback.
5. Maintenance
5.1 Cleaning
Regularly clean your earbuds and charging case to ensure optimal performance and hygiene:
- Wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove earbud tips and clean them with mild soap and water, then dry thoroughly before reattaching.
- Do not use abrasive cleaners or solvents.
5.2 Water Resistance
The earbuds feature an IPX4 waterproof nano-coating, protecting them from splashes and sweat. They are suitable for workouts and outdoor activities. Note: The charging case is not waterproof. Avoid submerging the earbuds or exposing the charging case to water.
5.3 Storage
When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.
6. Troubleshooting
If you encounter issues with your earbuds, refer to the following common solutions:
- Earbuds not pairing: Ensure both earbuds are charged. Place them back in the charging case, close the lid, then reopen and remove them to re-initiate pairing mode. Verify Bluetooth is enabled on your device and try searching again.
- No sound or low volume: Check the volume level on both your connected device and the earbuds. Ensure the earbuds are properly seated in your ears.
- Charging issues: Verify the USB-C cable is securely connected to both the charging case and the power source. Try a different cable or power adapter. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
- Intermittent connection: Ensure there are no obstructions between the earbuds and your device. Move closer to your device to reduce interference.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | TG01 |
| Brand | VOLT PLUS TECH |
| Connectivity Technology | Bluetooth 5.0 |
| Noise Control | Active Noise Cancellation (CVC 8.0) |
| Water Resistance Level | IPX4 (Earbuds only) |
| Charging Case Battery Capacity | 2000mAh |
| Earbud Playtime (with case) | Approximately 24 hours |
| Call Time (with case) | Approximately 100 hours |
| Headphones Jack | USBC (for charging case) |
| Control Method | Touch |
| Item Weight | 4 Ounces |
| Product Dimensions | 1 x 1.7 x 1.5 inches |
| Material | Aluminum, Hi Strength Plastic, Metal |
8. Warranty and Support
8.1 Warranty Information
Specific warranty details are not provided within this manual. Please refer to the product packaging, the point of purchase, or the manufacturer's official website for comprehensive warranty information.
8.2 Customer Support
For further assistance, technical support, or inquiries, please visit the VOLT PLUS TECH official website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
