Introduction
This manual provides detailed instructions for the VOLT PLUS TECH VPT-1258-B Portable Bluetooth Earbuds. Please read this guide thoroughly before using your device to ensure proper operation and maintenance.
What's in the Box:
- 2 x Earbuds
- 1 x Charging Cable (USB-C)
- 3 x Ear Adapters (pairs of small, medium, large)
- 1 x Power Bank Charging Case
- 1 x User Manual
Safety Information
- Do not expose the device to extreme temperatures or humidity.
- Keep the charging case dry; it is not waterproof.
- Do not attempt to disassemble or modify the earbuds or charging case.
- Dispose of the device responsibly according to local regulations.
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the charging case and earbuds. Connect the provided USB-C charging cable to the charging port on the case and a suitable power source. The LED display on the case will indicate the current battery level and charging status.
Image: The black charging case with a digital LED display and two earbuds resting beside it.
Image: A close-up of the open charging case, showing the earbuds inside and the LED display indicating battery percentage.
2. Initial Pairing
- Remove both earbuds from the charging case. They will automatically power on. A blue indicator light will illuminate.
- Alternatively, press and hold the touch area on both earbuds for 3 seconds to manually power them on. A blue indicator light will flash.
- Wait for both earbuds to automatically pair with each other. Once successfully paired, one earbud's indicator light will flash blue and red alternatively, indicating it is ready for device pairing.
- On your mobile device, enable Bluetooth and search for available devices. Select "JS25" from the list.
- Once connected, a voice prompt "Connected" will confirm successful pairing.
- After initial pairing, your earbuds will automatically connect to the last paired device when powered on and Bluetooth is enabled on the device.
- If pairing fails, place the earbuds back into the charging case, close the lid, and then repeat the steps from the beginning.
Image: A visual guide demonstrating the quick pairing steps for the earbuds, showing the earbuds and charging case.
Operating Instructions
Power On/Off
- Power On: Remove earbuds from the charging case, or press and hold the touch area on either earbud for 3 seconds.
- Power Off: Place earbuds back into the charging case and close the lid. They will automatically disconnect and power off.
Image: Illustration showing earbuds automatically connecting when removed from the case and shutting down when placed back in.
Call Management
- Answer/End Call: Single tap the touch area on either earbud.
- Reject Call: Press and hold the touch area on either earbud for 2 seconds.
Music Playback
- Play/Pause: Single tap the touch area on either earbud.
- Next Song: Double tap the right earbud.
- Previous Song: Double tap the left earbud.
- Volume Up: Triple tap the right earbud.
- Volume Down: Triple tap the left earbud.
Voice Assistant
- Activate Voice Assistant: Press and hold the touch area on either earbud for 2 seconds (after rejecting a call, if applicable).
Noise Reduction
These earbuds feature CVC 8.0 intelligent noise reduction technology to enhance call clarity and music listening experience by reducing ambient noise.
Image: Earbuds and charging case with a background suggesting an immersive audio experience, highlighting sound quality.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the earbuds and charging case. Do not use liquids or abrasive cleaners.
- Storage: Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Water Resistance: The earbuds are IPX4 waterproof/sweatproof, suitable for running and gym use. The charging case is not waterproof. Avoid exposing the charging case to water.
Troubleshooting
- Earbuds not pairing with each other: Place both earbuds back in the charging case, close the lid, then remove them to re-initiate the automatic pairing process.
- Earbuds not connecting to device: Ensure Bluetooth is enabled on your device and the earbuds are charged. Forget "JS25" from your device's Bluetooth list and repeat the pairing process from step 2.
- Only one earbud working: Place both earbuds back in the case, then remove them. If the issue persists, try resetting them by holding the touch area on both earbuds for approximately 10 seconds while they are out of the case, then re-pair.
- No sound: Check the volume level on both your connected device and the earbuds. Ensure the earbuds are properly connected to your device.
Specifications
- Brand: VOLT PLUS TECH
- Model: VPT-1258-B
- Bluetooth Version: 5.3
- Bluetooth Range: 33 Feet (10 meters)
- Earbud Battery Life: Up to 24 hours with charging case
- Charging Case Battery Capacity: 2000mAh
- Water Resistance (Earbuds): IPX4 (sweatproof/splashproof)
- Noise Control: Active Noise Cancellation, Passive Noise Cancellation, Sound Isolation (CVC 8.0)
- Audio Driver Size: 26 Millimeters
- Control Method: Touch
- Compatible Devices: Android, iOS, Mac, Motorola Moto G100, Windows
Warranty Information
This product is covered by a Manufacturers Limited 1 Year Warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact the manufacturer directly.
Support
For further assistance, technical support, or inquiries not covered in this manual, please visit the VOLT PLUS TECH official website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.