Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your FUKUMARU Floor to Ceiling Cat Tree. Please read all instructions carefully before assembly and use to ensure safe and correct installation and operation.
Safety Information
Warning: This product contains small parts that can be hazardous to pets if ingested. Keep all small components out of reach of pets and children during assembly. Ensure the cat tree is securely installed and stable before allowing pets to use it. Regularly check all connections for tightness.
Product Features
- Stable Support: Features 3 reinforced screw rods for enhanced stability, capable of holding up to 65 kg.
- Multi-Level Design: 6 levels including an extra-large soft hammock, 360° view transparent capsule, semi-enclosed cat condo, and view perch.
- Durable Materials: Constructed from rubber wood plywood and natural jute rope for scratching posts. Soft plush and felt mats provide comfort.
- Adjustable Height: Designed to fit most rooms, adjustable from 206 cm (69 inches) to 300 cm (118 inches). Middle columns can be removed for lower ceilings.
- Space-Saving: Occupies a minimal 36 x 36 cm (14 x 14 inches) floor space, utilizing vertical space efficiently.
- Easy Maintenance: Boards are covered with protective wax for easy cleaning. Faux fur hammock is machine washable.
Figure 1: Overview of FUKUMARU Cat Tree features, highlighting its stability, adjustable height, and space-saving design.
Figure 2: Details of the materials used, including multi-layer board, soft plush, jute rope, and anti-slip felt.
Assembly Instructions
Assembly requires careful attention to ensure stability. It is recommended to have two people for easier installation, especially when securing the tree to the ceiling.
Step 1: Unpack and Identify Components
Carefully unpack all parts and compare them with the included parts list (not provided in this document, refer to your product packaging). Ensure all components are present and undamaged before proceeding.
Step 2: Assemble the Base and Lower Sections
Begin by attaching the lowest scratching posts and platforms to the base. Follow the numerical sequence provided in your product's assembly diagram. Ensure all screws are tightened securely.
Step 3: Install Middle and Upper Sections
Continue adding the middle and upper scratching posts, platforms, hammock, and transparent capsule. Pay close attention to the orientation of each piece as indicated in the assembly guide.
Step 4: Adjust Height and Secure to Ceiling
The cat tree is designed with an adjustable height mechanism. For ceilings between 206 cm (69 inches) and 300 cm (118 inches), you can adjust the height by adding or removing middle columns as needed. The top section features a tension mechanism with three reinforced screw rods for stability. Extend these rods until the top pad makes firm contact with the ceiling. Tighten the screws to secure the tree in place, ensuring it is plumb and stable.
Figure 3: Various installation configurations for different ceiling heights.
Figure 4: The triple-bolt upgrade mechanism for superior stability.
Important Assembly Notes:
- Keep pets out of the assembly area until the tree is fully secured to prevent accidents.
- If a bolt feels stuck or difficult to loosen, check if the corresponding base layer of wood has become loose during transit. Tighten the base layer first, then attempt to adjust the bolt.
- Ensure all connections are firm and the tree does not wobble before allowing your cat to use it.
Operating and Usage
The FUKUMARU Cat Tree provides a multi-functional activity center for your cat, satisfying their natural instincts for climbing, scratching, playing, and resting at various heights.
- Climbing: Cats can utilize the multiple levels and scratching posts to climb and explore.
- Scratching: The jute-wrapped posts serve as durable scratching surfaces, helping to maintain claw health and protect furniture.
- Resting: The soft hammock, transparent capsule, and enclosed condo offer cozy spots for napping and observation.
- Observation: The elevated perches and transparent capsule provide cats with a secure vantage point to survey their surroundings.
Figure 5: A cat demonstrating climbing and resting on the FUKUMARU cat tree.
Figure 6: Cat utilizing the climbing features of the tree in a home environment.
Maintenance
Regular maintenance will extend the life of your cat tree and ensure a clean environment for your pet.
- Cleaning Wooden Surfaces: The rubber wood plywood boards are covered with a protective wax. Wipe them clean with a damp cloth as needed. Avoid harsh chemicals.
- Cleaning Fabric Components: The faux fur of the hanging cat hammock is machine washable. Remove it from the tree and wash according to fabric care instructions (typically cold water, gentle cycle, air dry).
- Scratching Posts: The natural jute rope scratching posts are durable. While they are designed to withstand scratching, inspect them periodically for significant wear and tear.
- Stability Check: Periodically check all screws and the ceiling tension mechanism to ensure they remain tight and secure. Re-tighten if any looseness is detected.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cat tree wobbles or is unstable. | Screws are loose; ceiling tension is insufficient; uneven floor/ceiling. | Re-tighten all assembly screws. Adjust the top tension rods to ensure firm contact with the ceiling. Ensure the tree is placed on a level surface. |
| Difficulty adjusting height mechanism. | Bolt is too tight or base layer is loose. | Ensure the wooden base layer of the adjustable section is securely tightened. Then, apply steady pressure to loosen the adjustment bolt. |
| Cats are not using certain platforms (e.g., transparent capsule). | Cats may be wary of new textures or transparent surfaces. | Encourage use with treats or toys. Some cats may prefer a non-transparent surface; consider adding a small mat or blanket to the transparent capsule if your cat avoids it. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AT11 |
| Brand | FUKUMARU |
| Product Dimensions (L x W x H) | 35.56 x 35.56 x 206-300 cm (14 x 14 x 69-118 inches) |
| Weight | 16 kg (35.2 lbs) |
| Material | Rubber Wood Plywood, Natural Jute Rope, Plush, Felt |
| Mounting Type | Floor Mount (Tension Rod to Ceiling) |
| Adjustable Height Range | 206 cm to 300 cm (69 inches to 118 inches) |
| Maximum Load Capacity | 65 kg (143 lbs) |
| Color | Beige |
Figure 7: Detailed dimensions and size ranges of the cat tree.
Warranty and Support
Information regarding product warranty and customer support was not provided in the available data. Please refer to the product packaging or contact the manufacturer directly for details on warranty coverage and support services.