Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset, Model 440-3350. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product. Keep this manual for future reference.
Product Overview
The Tru-Bolt Amherst Entry Door Handleset features a transitional farmhouse design with an oil rubbed bronze finish. It is designed for standard size doors and includes an adjustable throughbolt and backset for flexible installation.
Key Features:
- Transitional farmhouse design with an oil rubbed bronze finish.
- Adjustable throughbolt for flexible positioning.
- Compatible with all standard size doors.
- Sturdy metal construction for durability.
- Adjustable backset fits doors 1-3/8" to 1-3/4" thick.
Package Contents
Please verify that all components are present before beginning installation:
- Exterior Handleset Assembly
- Interior Knob/Lever Assembly
- Installation Hardware (screws, spindle, etc.)
- Note: Strike plate is not included and must be purchased separately if needed.
Safety Information
- Always wear appropriate safety gear, such as gloves and eye protection, during installation.
- Ensure all screws are tightened securely to prevent loosening over time.
- Keep small parts away from children.
- If you are unsure about any step, consult a qualified professional.
Setup and Installation
Before you begin, ensure your door is prepared with the necessary bore holes and backset. This handleset is designed for doors 1-3/8" to 1-3/4" thick.
Tools Required (Not Included):
- Phillips Head Screwdriver
- Measuring Tape
- Pencil
Installation Steps:
- Prepare the Door: Ensure the door has standard bore holes and the correct backset. The adjustable backset feature allows for flexibility.
- Install Latch Bolt: Insert the latch bolt into the edge bore hole of the door. Secure it with screws. Ensure the bevel of the latch faces the door frame.
- Install Exterior Handleset: Position the exterior handleset (the part with the long handle) onto the door, aligning the spindle through the latch bolt. The adjustable throughbolt allows for precise alignment.
- Install Interior Knob/Lever: Place the interior knob or lever assembly onto the door, aligning it with the exterior handleset and the spindle.
- Secure Assemblies: Use the provided installation hardware (screws) to securely fasten the interior and exterior assemblies together. Ensure the handleset operates smoothly before fully tightening all screws.
- Test Operation: Close the door and test the latching and locking mechanisms to ensure proper function.
Image 1: Exterior view of the Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset. This shows the main handle and the upper lock mechanism.
Image 2: Interior view of the Tru-Bolt Amherst Oil Rubbed Bronze knob. This is the component that goes on the inside of the door.
Operating Instructions
- To Open from Exterior: Insert the correct key into the cylinder and turn to unlock. Depress the thumb-latch to retract the latch bolt.
- To Open from Interior: Turn the interior knob/lever to retract the latch bolt.
- To Lock from Exterior: Use the key to engage the deadbolt (if paired with one) or the handleset's locking mechanism.
- To Lock from Interior: Use the turn-button or lever on the interior knob/lever to engage the lock.
Maintenance
- Cleaning: Clean the handleset with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishing agents, as these can damage the oil rubbed bronze finish.
- Lubrication: Periodically apply a small amount of graphite lubricant to the keyway if the lock mechanism feels stiff. Do not use oil-based lubricants.
- Inspection: Regularly check all screws for tightness and ensure the handleset operates smoothly. Tighten any loose screws as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Handleset is stiff or hard to turn. | Lack of lubrication; misaligned components. | Apply graphite lubricant to the keyway. Check for proper alignment during installation. |
| Latch bolt does not retract fully. | Screws too tight; latch bolt misaligned. | Loosen mounting screws slightly and re-test. Ensure latch bolt is installed correctly. |
| Handleset feels loose. | Mounting screws are loose. | Tighten all visible mounting screws. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Tru-Bolt |
| Model Number | 440-3350 |
| Colour | Bronze |
| Style | Transitional |
| Finish | Oil Rubbed |
| Material | Metal |
| Handle Type | Lever (Interior Knob/Lever) |
| Number of Pieces | 2 (Handleset and Interior Knob/Lever) |
| Special Features | Adjustable throughbolt, Adjustable backset |
| Door Thickness Compatibility | 1-3/8" to 1-3/4" |
| Product Dimensions | 30.35 x 7.01 x 7.01 cm (approx. 11.95 x 2.76 x 2.76 inches) |
| Included Components | Installation Hardware |
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the official Tru-Bolt website or contact their customer service department. Keep your proof of purchase for warranty claims.
Note: Specific warranty terms may vary by region and retailer.
