Important Safety Instructions
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- Read all instructions before using this fan.
- Use this fan only as described in this manual. Other uses not recommended may cause fire, electric shock, or injury to persons.
- To reduce the risk of electric shock, do not expose to water or rain.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- Always unplug the fan when not in use, when moving it from one location to another, or before cleaning.
- Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the fan.
- Do not block air openings or operate in an area where openings may become blocked.
- This fan is intended for indoor use only.
Product Overview
The Lasko Super Fan Max SF-20-GC2 is a high-velocity air mover designed for efficient air circulation, cooling, and drying in large areas. Its robust construction ensures durability, and its versatile design allows for various air movement applications.
Key Features:
- Pivoting blower directs air where needed
- 2 x 120-volt outlets for accessories and multi-fan connections
- Cools rooms fast, perfect for large area ventilation
- 3 Speed options
- 10-foot cord with integrated cord wrap
- Durable, impact Resistant construction
- Circuit breaker with reset button
- Kickstand to orient the fan to a 20-degree angle
Figure 1: Front view of the Lasko Super Fan Max SF-20-GC2, showcasing its compact design and powerful air outlet.
Setup
Unpacking:
Carefully remove the Lasko Super Fan Max from its packaging. Ensure all components, including the instruction manual, are present. Inspect the unit for any signs of damage during shipping.
Positioning and Orientation:
The Super Fan Max can be positioned in multiple ways to direct airflow effectively. It features a built-in kickstand for angled operation and can also be placed on its side for upward airflow.
Figure 2: The Lasko Super Fan Max can be positioned flat, angled using its kickstand, or upright to direct airflow as needed.
Figure 3: The Lasko Super Fan Max positioned on the floor, demonstrating its use in a practical setting for air circulation or drying.
Power Connection:
Plug the fan's 10-foot power cord into a standard 120-volt AC electrical outlet. Ensure the outlet is properly grounded. The integrated cord wrap allows for neat storage when not in use.
Figure 4: Rear view of the Lasko Super Fan Max with the power cord connected, highlighting the control dial and auxiliary outlets.
Operating Instructions
Control Panel:
The control panel is located on the side of the unit and features a rotary dial for power and speed selection, along with two auxiliary power outlets and a circuit breaker reset button.
Figure 5: Close-up of the control panel, showing the OFF/1/2/3 speed dial, auxiliary outlets, and circuit breaker reset button.
Speed Selection:
- Ensure the fan is plugged into a suitable power source.
- Rotate the control dial clockwise to select your desired speed setting:
- OFF: Turns the unit off.
- 1: Low speed setting for gentle air movement.
- 2: Medium speed setting for moderate air movement.
- 3: High speed setting for maximum air movement and drying power.
- To turn off the fan, rotate the dial counter-clockwise to the "OFF" position.
Auxiliary Outlets:
The Super Fan Max is equipped with two 120-volt auxiliary outlets. These outlets allow you to connect additional fans for increased air circulation or other compatible accessories. Always ensure that the total current draw from the auxiliary outlets does not exceed the specified limits (refer to the control panel markings for details).
If the circuit breaker trips, disconnect any devices from the auxiliary outlets and press the reset button on the control panel to restore power.
Maintenance
Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use harsh chemicals or abrasive cleaners.
- To clean the fan blades and internal components, use a vacuum cleaner with a brush attachment to remove dust and debris from the air intake and exhaust grilles.
- Ensure the fan is completely dry before plugging it back in and operating.
Storage:
When not in use, store the fan in a cool, dry place. Use the integrated cord wrap to secure the power cord. Protect the unit from dust and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate. | No power to the unit. Circuit breaker tripped. | Ensure the fan is securely plugged into a working outlet. Press the reset button on the control panel. Reduce load on auxiliary outlets if used. |
| Reduced airflow. | Air intake/exhaust blocked. Fan blades are dirty. | Check for obstructions around the fan. Unplug the fan and clean the grilles and blades as per maintenance instructions. |
| Unusual noise or vibration. | Loose parts or foreign object inside. Unit not on a stable surface. | Unplug the fan and inspect for any loose components or foreign objects. If problem persists, contact customer support. Place the fan on a flat, stable surface. |
Specifications
| Attribute | Value |
|---|---|
| Brand | Lasko |
| Model Name | Super Fan |
| Item Model Number | SF-20-GC2 |
| Color | White |
| Power Source | AC |
| Voltage | 120 Volts |
| Wattage | 149.2 watts |
| Number of Power Levels | 3 |
| Product Dimensions (D x W x H) | 11.42"D x 13.39"W x 11.81"H |
| Item Weight | 11.66 pounds |
| Blade Material | Plastic |
| Indoor/Outdoor Usage | Indoor |
| UPC | 046013264022 |
Warranty and Support
Lasko products are manufactured with quality and care. For specific warranty information, please refer to the warranty card included with your product or visit the official Lasko website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Lasko Customer Service:
- Website: www.lasko.com
- Phone: Refer to Lasko's official website for current contact numbers.
- Email: Refer to Lasko's official website for current contact email.
Please have your model number (SF-20-GC2) and purchase date available when contacting support.
