Scheppach 20V Dual Charger SDBC2.4A Instruction Manual

1. Introduction

Thank you for choosing the Scheppach 20V Dual Charger SDBC2.4A. This charger is designed for efficient and safe charging of two Scheppach IXES 20V series Li-ion batteries simultaneously. Please read this instruction manual carefully before initial use to ensure safe operation, optimal performance, and extended product life. Keep this manual for future reference.

2. Safety Instructions

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read All Instructions: Familiarize yourself with the charger's operation and safety guidelines.
• Use Only with Specified Batteries: This charger is exclusively designed for Scheppach IXES 20V series Li-ion batteries. Do not attempt to charge other battery types, as this may lead to explosion, personal injury, or property damage.
• Indoor Use Only: Do not expose the charger to rain or wet conditions.
• Proper Ventilation: Ensure adequate ventilation during charging. Do not cover the charger or place it on soft surfaces that could block ventilation openings.
• Unplug When Not in Use: Disconnect the charger from the power supply when not in use or before cleaning.
• Avoid Damage: Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged. Contact authorized service personnel.
• Keep Away from Children: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Do Not Disassemble: Never attempt to open or modify the charger. There are no user-serviceable parts inside.
• Power Supply: Ensure the power supply voltage matches the rating specified on the charger.

3. Product Components and Features

The Scheppach SDBC2.4A Dual Charger offers the following key features:

• Dual Charging Slots: Allows simultaneous charging of two 20V Li-ion batteries.
• LED Indicator: Provides clear visual feedback on battery and charging status.
• Integrated Wall Mount: For convenient and space-saving storage and operation.
• Intelligent Charge Management: Optimizes the charging process to prolong battery life and runtime.
• Compatibility: Designed for all batteries within the Scheppach IXES 20V series.

Image 1: The Scheppach 20V Dual Charger SDBC2.4A, showing its two battery slots and LED indicator panel.

Image 2: Infographic illustrating key features such as charging times (60 min for 2.0 Ah, 120 min for 4.0 Ah), long battery life, LED indicator, and 20V compatibility.

4. Setup

1. Unpacking: Carefully remove the charger from its packaging. Inspect for any signs of damage. If damaged, do not use and contact your retailer.
2. Placement: Place the charger on a stable, flat surface in a well-ventilated area. Ensure there is sufficient space around the charger for heat dissipation.
3. Wall Mounting (Optional): The charger features an integrated wall mount. Use appropriate screws and wall plugs (not included) to securely fasten the charger to a wall. Ensure the mounting surface can support the weight of the charger and two batteries.
4. Power Connection: Plug the charger's power cord into a suitable electrical outlet. The charger's LED indicator may briefly illuminate or show a standby status.

5. Operating Instructions

5.1 Charging Batteries

1. Insert Battery: Slide a Scheppach IXES 20V Li-ion battery into one of the charging slots until it clicks into place. You can insert a second battery into the other slot if needed.
2. Monitor LED Indicator: The LED indicator on the charger will show the charging status.
3. Charging Complete: Once the battery is fully charged, the LED indicator will change to indicate completion.
4. Remove Battery: Press the battery release button (if present on the battery) and slide the charged battery out of the slot.

Image 3: The Scheppach Dual Charger with a 20V battery partially inserted into one of the charging slots, demonstrating the charging process.

5.2 LED Indicator Guide

The LED indicator provides visual feedback on the charger's status:

• Green Light (Solid): Battery fully charged.
• Green Light (Flashing): Battery is currently charging.
• Red Light (Solid): Error condition (e.g., faulty battery, incorrect battery type, or charger malfunction).
• No Light: Charger is not connected to power or is in standby mode without a battery inserted.

5.3 Approximate Charging Times

The intelligent charge management system optimizes charging. Typical charging times are:

• 2.0 Ah Battery: Approximately 60 minutes
• 4.0 Ah Battery: Approximately 120 minutes

Charging times may vary based on battery condition, ambient temperature, and remaining charge level.

Image 4: An overview of the Scheppach IXES 20V battery platform, showcasing various compatible tools that utilize the same battery system as the charger.

6. Maintenance

• Cleaning: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents. Keep the charging slots free of dust and debris.
• Storage: Store the charger in a dry, cool place, away from direct sunlight and moisture. If storing for extended periods, unplug it from the power outlet.
• Inspection: Periodically inspect the power cord and charger housing for any signs of damage. If damage is found, discontinue use and have it serviced by qualified personnel.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Scheppach products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions. For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach website for contact information.