Introduction
Thank you for choosing the BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector. This product is designed to provide superior protection for your Hyper Tough HT300 Scan Tool's display, safeguarding it from scratches, impacts, and reducing glare for improved visibility. This manual will guide you through the installation process, highlight key features, and provide essential care and troubleshooting information to ensure optimal performance and longevity of your screen protector.
Image: The BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector packaging shown alongside the Hyper Tough HT300 Scan Tool, demonstrating product compatibility.
Installation Guide
Before You Begin
- Ensure your Hyper Tough HT300 Scan Tool is powered off.
- Work in a clean, dust-free environment to prevent particles from getting trapped under the screen protector.
- Wash your hands thoroughly to avoid transferring oils or dirt to the screen.
- Gather all included accessories: the screen protector(s), cleaning cloth, and any dust removal stickers.
Image: The BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector 2-pack, including the screen protectors, packaging, and a cleaning cloth, which are essential for installation.
Installation Steps
- Clean the Screen: Use the provided cleaning cloth to thoroughly wipe down the screen of your Hyper Tough HT300 Scan Tool. Ensure all dust, smudges, and fingerprints are removed. For stubborn marks, a slightly damp, lint-free cloth can be used, followed by drying with the provided cloth.
- Remove Dust: Use any included dust removal stickers or tape to lift off any remaining dust particles from the screen. Inspect the screen carefully under good lighting to ensure it is perfectly clean.
- Align the Protector: Carefully peel back a small portion of the protective film from one end of the screen protector (usually labeled "Step 1" or similar). Align the exposed edge of the screen protector with the corresponding edge of your device's screen. Pay close attention to cutouts for sensors or cameras.
- Apply Gradually: Once aligned, slowly lower the rest of the screen protector onto the device's screen, peeling off the remaining protective film as you go. Use a credit card or the provided squeegee (if any) to gently push out air bubbles towards the edges as you apply.
- Remove Air Bubbles: If air bubbles remain, gently lift the nearest edge of the screen protector and re-apply, pushing the bubble out. Small bubbles may disappear on their own within 24-48 hours.
- Final Wipe: Once applied, give the screen protector a final gentle wipe with the cleaning cloth to remove any new smudges.
Product Features and Usage
The BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector offers several key benefits:
9H Hardness Rating
This screen protector boasts a 9H hardness rating, providing exceptional resistance against scratches from everyday objects like keys, coins, and even knives. It offers robust protection without the risk of chipping or cracking like traditional glass protectors.
Image: A visual representation of the screen protector's scratch-resistant properties, with a knife and key demonstrating its durability against common abrasive items.
Anti-Glare Surface
The anti-glare matte finish disperses light, significantly reducing reflections and glare from bright light sources, both indoors and outdoors. This improves screen visibility and reduces eye strain, making it easier to read your device's display in various lighting conditions.
Strong and Impact Resistant
Designed to be highly protective and durable, the ToughShield does not shatter or crack upon impact, providing reliable protection for your device's screen against accidental drops and bumps.
Image: This illustration highlights the screen protector's strong and impact-resistant nature, contrasting it with a shattered screen to emphasize its protective qualities.
Smooth, Paper-like Feel
The ultra-smooth matte surface provides a comfortable, paper-like tactile experience, which can enhance interaction with the touchscreen, especially for tasks requiring precision or stylus use.
Image: A stylus interacting with a tablet screen, demonstrating the smooth, paper-like texture of the screen protector that enhances writing and drawing experiences.
Anti-Smudge Surface
The screen protector features an anti-smudge coating that repels unwanted smudges, dust, and fingerprints, keeping your screen cleaner and clearer for longer periods.
Image: A visual comparison showing one half of a screen covered in fingerprints and the other half clean, illustrating the effective anti-smudge properties of the screen protector.
Precision Cut and Two-Pack
Each ClearTouch Anti-Glare ToughShield 9H is precision-cut to perfectly fit the exact dimensions and contours of your Hyper Tough HT300 Scan Tool's screen, ensuring full accessibility to all functionalities. The product comes in a convenient two-pack, providing a spare protector for future use or sharing.
Care and Maintenance
To maintain the clarity and effectiveness of your BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector, follow these simple care instructions:
- Cleaning: Use a soft, lint-free microfiber cloth (like the one provided) to gently wipe the screen protector. For smudges or fingerprints, you can slightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While the protector is highly durable, extreme pressure or sharp objects can still cause damage.
- Reusability: The ClearTouch screen protector is designed with installation forgiveness, allowing for reuse and reinstallation if needed, provided the adhesive side remains clean and free of debris.
Troubleshooting
If you encounter any issues during or after installation, refer to the table below for common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Air bubbles under the protector | Dust particles or uneven application. | Gently lift the nearest edge of the protector and re-apply, pushing the bubble out with a squeegee or credit card. Ensure the screen is dust-free before re-application. Small bubbles may dissipate over 24-48 hours. |
| Protector does not adhere properly | Dust, oil, or residue on the screen; protector adhesive is compromised. | Ensure the screen is perfectly clean and dry before application. If the adhesive is damaged, use the second protector from the 2-pack. |
| Reduced touch sensitivity | Improper installation or air trapped underneath. | Re-check for air bubbles and re-apply if necessary. Ensure the protector is fully adhered to the screen. |
| Glare still visible | Extreme lighting conditions or specific light angles. | While the anti-glare feature significantly reduces glare, it may not eliminate it entirely in all extreme lighting conditions. Adjust your viewing angle or lighting environment if possible. |
Product Specifications
| Feature | Detail |
|---|---|
| Product Name | ClearTouch Anti-Glare ToughShield 9H Screen Protector |
| Compatibility | Hyper Tough HT300 Scan Tool |
| Hardness Rating | 9H |
| Material | Flexible Film |
| Finish | Matte, Anti-Glare |
| Features | Scratch-resistant, Impact-resistant, Fingerprint-free, Precision-cut, Reusable |
| Package Contents | Two (2) Screen Protectors, Installation Accessories (cleaning cloth) |
| Item Weight | 0.7 ounces |
| Manufacturer | BoxWave |
| Country of Origin | China |
Warranty and Support
BoxWave products are designed for quality and durability. For specific warranty information regarding your ClearTouch Anti-Glare ToughShield 9H Screen Protector, please refer to the packaging or visit the official BoxWave website. If you require further assistance, have questions about installation, or need to report an issue, please contact BoxWave customer support through their official channels. Contact information can typically be found on the product packaging or the BoxWave website.
