Introduction
Thank you for choosing the TUTOTAK TB01BB055 Narrow End Table. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new end table. This set includes two end tables, each equipped with a charging station and two fabric drawers, designed for compact spaces in living rooms, bedrooms, or beside beds.
Safety Information
- Read all instructions carefully before assembly and use.
- Keep small parts away from children during assembly.
- Ensure all connections are secure before placing items on the table or using the charging station.
- Do not overload the charging station. Refer to the specifications for power limits.
- Avoid exposing the table to excessive moisture or direct sunlight.
- Use only a damp cloth for cleaning; avoid harsh chemicals.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer service.
- End Table Frame Components (Metal)
- Tabletop and Shelf Panels (Engineered Wood)
- Fabric Drawers (2 per table)
- Charging Station Unit (1 AC outlet, 1 USB port, 1 Type C port, 4.9 ft power cord)
- Adjustable Foot Mats
- Assembly Hardware (Screws, Allen Wrench, etc.)
- Instruction Manual
Setup and Assembly
Assembly is straightforward and requires a screwdriver (not included). All parts are numbered for easy identification. Follow the included assembly instructions step-by-step.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame: Connect the metal frame components using the provided hardware. Ensure all screws are tightened securely.
- Attach Shelves: Secure the engineered wood tabletop and middle shelf to the assembled frame.
- Install Charging Station: Integrate the charging station unit into its designated slot on the tabletop. Ensure the power cord is routed safely.
- Insert Fabric Drawers: Fold and insert the fabric drawers into their respective compartments.
- Attach Foot Mats: Screw in the adjustable foot mats to the bottom of the table legs. Adjust them to stabilize the table on uneven surfaces.
Operating Instructions
Using the Charging Station
The integrated charging station provides convenient power access for your electronic devices.
- Connect to Power: Plug the 4.9 ft power cord from the end table into a standard wall outlet.
- Charge Devices:
- Use the 120V/12A AC outlet for larger electronics like lamps or laptops.
- Use the 5V/2A USB port for standard USB-A charging cables.
- Use the 5V/2A Type C port for USB-C compatible devices.
- Optimal Use: The spacing between outlets is designed to prevent adapters from blocking each other, allowing multiple devices to charge simultaneously.
Using the Fabric Drawers
The two fabric drawers provide discreet storage for personal items.
- Simply pull the drawer handle to open and push to close.
- Avoid placing excessively heavy or sharp objects in the fabric drawers to prevent damage.
Maintenance
Proper care will extend the life and appearance of your end table.
- Cleaning: Wipe the wood and metal surfaces with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as these can damage the finish.
- Fabric Drawers: For minor spills on fabric drawers, spot clean with a mild detergent and damp cloth. Allow to air dry completely.
- Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Foot Mats: Adjust the foot mats as needed to maintain stability and prevent floor scratching.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charging station not working. | Power cord not plugged in; wall outlet not active; device cable faulty; charging station malfunction. | Ensure power cord is securely plugged into a live outlet. Test the wall outlet with another device. Try a different charging cable. If issues persist, contact customer service. |
| Table is wobbly. | Uneven floor; loose assembly screws; foot mats not adjusted. | Adjust the foot mats on the bottom of the legs to compensate for uneven surfaces. Check and tighten all assembly screws. |
| Drawers do not slide smoothly. | Drawer not inserted correctly; obstruction in the compartment. | Remove the drawer and re-insert it, ensuring it is properly aligned. Check for any objects obstructing the drawer's path. |
Specifications
| Feature | Detail |
|---|---|
| Brand | TUTOTAK |
| Model Name | TUTOTAK TB01BB055 |
| Product Dimensions | 7.8"D x 15.8"W x 24.8"H |
| Frame Material | Metal |
| Top Material Type | Engineered Wood |
| Color | Brown |
| Number of Drawers | 2 (Fabric) |
| Charging Station | 1 AC Outlet (120V/12A), 1 USB Port (5V/2A), 1 Type C Port (5V/2A) |
| Power Cord Length | 4.9 ft |
| Assembly Required | Yes |
| Care Instructions | Wipe with Damp Cloth |
Warranty and Support
TUTOTAK is committed to providing high-quality products and customer satisfaction. Each end table undergoes thorough testing to ensure quality.
For any questions, concerns, or assistance with your product, please do not hesitate to contact TUTOTAK customer service. Our friendly and professional team aims to respond within 24 hours.
Please refer to your purchase documentation for specific warranty details.