Introduction
Thank you for choosing the STRICH Collapsible Piano Keyboard Stand. This manual provides essential information for the proper setup, operation, and maintenance of your new keyboard stand. Designed for versatility and stability, this stand is compatible with a wide range of digital pianos and keyboards, offering adjustable height and width for optimal playing comfort.
The STRICH keyboard stand features a robust construction of high-strength aluminum alloy and reinforced plastics, ensuring durability and reliable support for your instrument. Its foldable design enhances portability and simplifies storage, making it an ideal choice for musicians on the go or those with limited space.
Safety Information
- Ensure all adjustment knobs and locking mechanisms are securely tightened before placing any instrument on the stand.
- Do not exceed the maximum load capacity of 88 lbs (40 kg).
- Place the stand on a flat, stable, and non-slip surface to prevent accidental tipping.
- Keep fingers clear of moving parts during setup and adjustment to avoid pinching.
- This product is better suited for use while sitting on a piano bench.
Package Contents
- STRICH Collapsible Piano Keyboard Stand (Main Frame)
- Adjustable Support Arms (pre-attached)
- Non-slip Foot Pads (pre-attached)
- Instruction Manual
Setup
1. Unfolding the Stand
Carefully remove the stand from its packaging. Place the folded stand on a flat surface. Gently pull the legs outwards until they lock into their open position. Ensure all four legs are fully extended and stable.
2. Adjusting Height
The stand's height can be adjusted from 58 cm (22.8 inches) to 70 cm (27.6 inches). To adjust, loosen the height adjustment knobs located on each leg. Extend or retract the inner leg tubes to your desired height. Once set, securely tighten all adjustment knobs to prevent movement.
Image: The keyboard stand illustrating its adjustable height and width features with directional arrows.
3. Adjusting Width
The stand's width is adjustable from 73 cm (28.7 inches) to 107 cm (42.1 inches). To adjust, loosen the width adjustment knob located on the central crossbar. Slide the two main sections of the stand apart or together to match the width of your keyboard. Tighten the knob firmly once the desired width is achieved.
Image: Detailed view of the keyboard stand highlighting its adjustable dimensions for height and width.
4. Securing the Keyboard
Place your keyboard onto the stand's top support arms. The high-density EVA foam padding on the arms helps secure the instrument and prevents scratches. Ensure the keyboard is centered and stable before use.
Video: A demonstration of the STRICH Piano Keyboard Stand's assembly and adjustment process.
Operating
Compatibility
The STRICH SKT-01 stand is designed for broad compatibility, fitting digital pianos and keyboards with 54, 61, or 88 keys. Its adjustable width accommodates over 80% of home and digital piano models.
Image: The keyboard stand demonstrating its wide compatibility with various keyboard sizes.
Stability Features
Non-slip foot pads ensure a firm grip on various surfaces, providing a stable foundation. The top layer's high-density EVA foam padding not only secures your instrument but also adds a layer of cushioning for a more comfortable playing experience.
Image: Close-up view of the non-slip foot pads and EVA foam padding for enhanced stability and instrument protection.
Portability and Storage
The stand features a foldable design that significantly reduces its volume by over 50% and its weight to a mere 5.8 kg (12.8 lbs). This makes it effortlessly portable for transport and convenient for storage in compact spaces.
Image: The keyboard stand in its collapsed, folded state, demonstrating its portability and ease of storage.
Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws, knobs, and joints to ensure they are tight and secure. Tighten any loose components as needed.
- Storage: When not in use, fold the stand and store it in a dry, cool place away from direct sunlight or extreme temperatures.
Troubleshooting
- Stand Wobbles: Ensure all legs are fully extended and all adjustment knobs are tightened. Verify the stand is on a level surface.
- Difficulty Adjusting Height/Width: Loosen the adjustment knobs completely before attempting to slide the components. Check for any debris or obstructions in the sliding mechanisms.
- Keyboard Slides on Stand: Confirm the non-slip EVA foam pads are clean and intact. Ensure the keyboard is properly centered on the support arms.
Specifications
| Feature | Detail |
|---|---|
| Model | SKT-01 |
| Shape | Single Tier |
| Base Type | Leg |
| Assembly Required | Yes (Minimal) |
| Load Capacity | 88 Pounds (40 kg) |
| Height Range | 58-70 cm (22.8-27.6 inches) |
| Width Adjustment | 73-107 cm (28.7-42.1 inches) |
| Material | Aluminum Alloy, Reinforced Plastics |
| Color | Black |
| Item Weight | 13.42 pounds (6.1 kg) |
| Foldable Design | Yes |
| Special Features | Width adjustability, foldable design, non-slip foot pads, high-density EVA foam padding |
Warranty & Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official STRICH website. Keep your purchase receipt as proof of purchase for any warranty claims.
