STRICH SMT-20 GUITAR RACK - INSTALLATION GUIDE
Unleash Your Inner Passion!
Parts Included:
- A x1
- B x1
- C x1
- D x1
- E x1
- F x1
- G x1
- L x2 (Reinforced Rotatable Screws)
- M x2 (Fixed Screws)
- N x12 (Fixed Screws)
Installation Steps:
STEP-01: Mounting Rotatable Screws
Description: Attach rotatable screws (L) to the designated parts (C, D).
Parts involved: C, D, L x2
STEP-02: Bottom Front Unit - Left
Description: Connect the bottom front unit (E) to the left unit (A).
Parts involved: A, E, N x2
STEP-03: Bottom Front Unit - Right
Description: Connect the bottom front unit (E) to the right unit (B).
Parts involved: B, E, N x2
STEP-04: Left & Right Unit
Description: Attach the left unit (A) and right unit (B) to the base.
Parts involved: A, B, M x2
STEP-05: Bottom Back Unit
Description: Attach the bottom back unit (F) to the assembled base.
Parts involved: F, N x4
STEP-06: Top Unit
Description: Attach the top unit (G) to the structure.
Parts involved: G, N x2
Mounting Parts Instruction
- A & C: Left Unit
- B & D: Right Unit
- E: Bottom Front Unit
- F: Bottom Back Unit
- G: Top Unit
- L: Reinforced Rotatable Screws
- M & N: Fixed Screws
*Please Note
- All wooden parts are labeled with stickers A, B, C, etc. Please complete the installation following the instructions steps.
- When installing the C and D wooden pieces, keep the side with the rotatable screw installed facing inward.
- Use your glue to reinforce the joints of wooden parts.
