1. Introduction
The Scheppach 4-in-1 Cordless Multi-Tool BC-MFH400-X is a versatile garden device designed for various outdoor tasks. It combines four essential functions: a grass trimmer, brush cutter, hedge trimmer, and pole pruner, all powered by the Scheppach IXES 20-Volt battery system. This manual provides detailed instructions for safe assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.
Figure 1: Scheppach 4-in-1 Cordless Multi-Tool BC-MFH400-X with all included attachments and batteries.
2. Safety Information
WARNING: Always use appropriate personal protective equipment (PPE) including safety glasses, gloves, and sturdy footwear. Keep children and pets away from the work area during operation. Avoid contact with skin and eyes. For prolonged work, use hearing protection. Never leave the device running unattended.
- Read and understand all instructions before operating the tool.
- Ensure the battery is fully charged before use.
- Always disconnect the battery before cleaning, maintenance, or changing attachments.
- Inspect the tool for damage before each use. Do not operate if damaged.
- Maintain a firm grip on the tool and be aware of your surroundings.
- Do not operate in wet conditions or near flammable liquids/gases.
3. Product Components
The Scheppach 4-in-1 Multi-Tool includes the following main components:
- Main power unit with brushless motor
- Grass Trimmer attachment
- Brush Cutter attachment (with 3-tooth blade)
- Hedge Trimmer attachment
- Pole Pruner attachment
- 2x 2Ah 20V IXES Series Batteries
- Dual Charger
- Shoulder strap with quick-release mechanism
- Blade and bar protectors
- Assembly tools
Figure 2: The Scheppach IXES 20V battery platform, indicating compatibility with various tools.
4. Setup and Assembly
The multi-tool features a tool-free attachment change system for quick and easy conversion between functions.
- Attaching the Shaft: Connect the main power unit to the desired attachment shaft. Align the connection points and push until it clicks into place. Secure with the locking knob.
- Installing Attachments: For the hedge trimmer and pole pruner, ensure the attachment head is securely fastened to the extension shaft.
- Battery Installation: Insert a charged 20V IXES battery into the battery slot on the power unit until it locks. To remove, press the release button and pull the battery out.
- Shoulder Strap: Attach the shoulder strap to the designated point on the main shaft for comfortable and fatigue-free operation, especially during longer tasks.
Figure 3: The tool-free mechanism allows for quick and easy attachment changes.
5. Operating Instructions
The multi-tool features an intuitive control panel for speed adjustment.
Figure 4: The control panel allows for easy speed adjustment in 3 stages.
5.1. Grass Trimmer
Ideal for trimming grass edges and light vegetation.
- Working Width: 380 mm
- Line: 1.6 mm Nylon Double Line
- Operation: Features a tip-automatic line feed. Gently tap the trimmer head on the ground to extend the line.
5.2. Brush Cutter
Suitable for thicker grass, weeds, and light brush.
- Blade: 3-tooth blade made of special steel
- Working Width: 255 mm
- Operation: Use a sweeping motion, keeping the blade clear of obstacles.
5.3. Hedge Trimmer
For shaping and trimming hedges and shrubs.
- Cutting Length: 390 mm
- Angle Adjustment: 11-fold angle adjustment for versatile cutting positions.
- Max. Branch Diameter: 24 mm
- Blade: Durable quality blade made of laser-cut steel.
Figure 5: The hedge trimmer head can be adjusted by up to 165 degrees for optimal cutting angles.
5.4. Pole Pruner
For cutting higher branches and limbs.
- Cutting Length: 260 mm
- Cutting Speed: Max. 18 m/s
- Speed Stages: 3 stages (1st gear – 12m/s, 2nd gear – 15m/s, 3rd gear – 18m/s)
- Lubrication: Automatic chain lubrication.
- Bar & Chain: ProCut bar & chain.
Figure 6: Universal application examples of the multi-tool: Grass Trimmer, Hedge Trimmer, Brush Cutter, and Pole Pruner.
Figure 7: Application examples: Suitable for shrubs, bushes, branches, hedges, lawn, and weeds.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your multi-tool.
- Cleaning: After each use, clean the tool and attachments with a dry cloth. Remove any grass, dirt, or debris from blades and vents.
- Blade Care: For the hedge trimmer and brush cutter, regularly check blades for sharpness and damage. Sharpen or replace as needed.
- Chain Lubrication (Pole Pruner): Ensure the automatic chain lubrication system is functioning correctly and the oil reservoir is filled with appropriate chain oil.
- Storage: Store the tool and batteries in a dry, secure place, away from direct sunlight and extreme temperatures.
- Battery Care: Store batteries partially charged (around 50%) if not used for extended periods. Avoid fully discharging or overcharging.
7. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged or improperly inserted; Safety switch not engaged | Charge battery; Reinsert battery correctly; Ensure safety switch is fully engaged |
| Poor cutting performance | Blades/chain dull or damaged; Incorrect speed setting; Overloading the tool | Sharpen/replace blades/chain; Adjust to higher speed; Do not force the tool through thick material |
| Excessive vibration | Damaged blade/line; Loose attachment | Inspect and replace damaged parts; Ensure all attachments are securely fastened |
| Battery drains quickly | Battery old or damaged; Continuous heavy load | Replace battery; Use appropriate speed for the task; Allow tool to cool during heavy use |
8. Technical Specifications
The BC-MFH400-X features a maintenance-free brushless motor, offering superior efficiency and longevity.
Figure 8: Product advantages of the Brushless Motor: maintenance-free, longer lifespan, lower thermal load, maximum efficiency, and longer battery runtimes.
| Specification | Value |
|---|---|
| Model Number | 5904820900 |
| Product Dimensions | 217 x 13 x 20 cm |
| Weight | 13.04 Kilograms |
| Power Source | Battery Powered (2x 20V = 40V) |
| Motor Type | Brushless Motor |
| Hedge Trimmer Cutting Length | 390 mm |
| Grass Trimmer Working Width | 380 mm |
| Pole Pruner Cutting Length | 260 mm |
| Max. Speed | 6480 RPM |
Figure 9: Overview of key specifications for the multi-tool functions.
9. Warranty and Support
Scheppach products are manufactured with high-quality materials and undergo strict quality controls. For warranty information and customer support, please refer to the warranty card included with your product or visit the official Scheppach website. Keep your proof of purchase for any warranty claims.
For further assistance or spare parts, please contact Scheppach customer service:
- Website: www.scheppach.com
- Contact Information: Refer to your regional Scheppach distributor or the contact section on the website.
