1. Introduction
This instruction manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Scheppach BC-PS150-X 20V Cordless Pruning Saw. Please read this manual thoroughly before first use and keep it for future reference. This powerful and versatile tool is designed for pruning trees, shrubs, cutting green waste, and processing small timber.
Figure 1: Scheppach BC-PS150-X Cordless Pruning Saw with included 2Ah battery and charger.
2. Safety Instructions
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
General Safety
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection.
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Product-Specific Safety Features
The Scheppach BC-PS150-X is equipped with several safety features to ensure secure handling:
- Hand Guard: Provides protection for the user's hand during operation.
- Chain Guard: Covers the chain to prevent accidental contact.
- Soft Grip Handle: Ensures a firm and comfortable grip, reducing fatigue.
- Safety Switch: Prevents unintentional starting of the saw. The on/off switch guarantees additional safety.
Figure 2: Hand guard and chain guard for user protection.
Figure 3: On/off safety switch for secure operation.
3. Product Components
Familiarize yourself with the main components of your Scheppach BC-PS150-X Pruning Saw:
- Saw Body: Main housing containing the motor and controls.
- Brushless Motor: Provides efficient power, longer runtime, less wear, and low maintenance.
- Guide Bar: The metal bar along which the saw chain runs.
- Saw Chain: The cutting element of the saw.
- Hand Guard: Protective barrier for the user's hand.
- Chain Guard: Cover for the saw chain.
- Soft Grip Handle: Ergonomic handle for comfortable use.
- Safety Switch: Activates/deactivates the saw.
- Oil Tank Cap: For chain lubrication oil.
- Chain Tensioning Knob: For adjusting chain tension.
- Battery Pack: 20V IXES Lithium-ion battery.
- Charger: For recharging the battery pack.
Figure 4: Benefits of the efficient brushless motor.
Figure 5: Key specifications including cutting length and chain speed.
4. Assembly and Setup
4.1. Battery Installation and Charging
- Ensure the saw is switched off and the safety switch is engaged.
- Align the battery pack with the battery slot on the saw handle.
- Slide the battery pack firmly into place until it clicks, indicating it is securely locked.
- To remove, press the battery release button and slide the battery out.
- To charge the battery, connect the charger to a power outlet and insert the battery pack into the charger. Follow the charger's indicator lights for charging status.
Figure 6: The 20V IXES battery and charger system.
4.2. Chain Tensioning
The Scheppach BC-PS150-X features quick and easy automatic chain tensioning using a spring compressor. This system ensures optimal chain tension for safe and efficient cutting without manual adjustments.
Figure 7: Automatic chain tensioning mechanism.
4.3. Chain Lubrication
The saw is equipped with automatic chain lubrication for uninterrupted work. Before each use, ensure the oil tank is filled with appropriate chain oil. This system continuously lubricates the chain and guide bar during operation, reducing friction and wear.
Figure 8: Automatic chain lubrication system.
5. Operation
5.1. Starting and Stopping the Saw
- Ensure the battery is fully charged and properly installed.
- Hold the saw firmly with both hands, maintaining a balanced stance.
- Press the safety switch (if applicable) and then the trigger to start the saw.
- Release the trigger to stop the saw.
5.2. Cutting Techniques
The Scheppach BC-PS150-X is suitable for a variety of cutting tasks:
- Pruning Branches: Position the saw firmly against the branch, ensuring a stable cutting angle. Apply steady pressure and allow the saw to cut through the material.
- Cutting Green Waste: Ideal for reducing garden waste into manageable pieces.
- Processing Joist Timber: Can be used for cutting smaller joist timber pieces.
- Creating Kindling: Efficiently cuts small logs into kindling for fires.
CAUTION: Always be aware of kickback. Ensure the tip of the guide bar does not contact any object during operation.
Figure 9: Universal use examples: cutting joist timber, kindling, and branches.
6. Maintenance and Care
6.1. Cleaning
After each use, clean the saw thoroughly. Remove sawdust, debris, and resin from the guide bar, chain, and motor housing. Use a soft brush or compressed air. Do not use harsh chemicals or abrasive cleaners.
6.2. Chain Oil Refilling
Regularly check the chain oil level and refill as needed. Use only recommended chain lubricant. The automatic lubrication system requires a consistent supply of oil to function correctly.
6.3. Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store fully discharged batteries for extended periods. Charge them periodically to maintain battery health.
- Avoid exposing batteries to water or moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | Battery not charged or improperly installed Safety switch not engaged Overload protection activated | Charge battery and ensure proper installation Engage safety switch before pressing trigger Allow tool to cool down, reduce load |
| Poor cutting performance | Dull chain Incorrect chain tension Insufficient chain lubrication | Sharpen or replace chain Check automatic chain tensioning Refill chain oil tank |
| Saw chain stops during operation | Overload Chain binding in material | Reduce cutting pressure Ensure material is properly supported and not pinching the chain |
| Excessive vibration | Loose chain Damaged chain or guide bar | Check automatic chain tensioning Inspect and replace damaged components |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 5910310900 |
| Voltage | 20 Volts |
| Cutting Length | 150 mm (6 inches) |
| Chain Speed | 6.8 m/s |
| Motor Type | Brushless |
| Product Dimensions | 42.5 x 11 x 17 cm |
| Item Weight | 1.3 kg |
| Power Source | Battery Powered |
| Included Components | Cordless wood cutter, 6" ProCut Sword & Chain, 2Ah Battery, Charger |
9. Warranty and Customer Support
All Scheppach products come with a 2-year UK wide warranty when registered online. To ensure you are covered and have easy access to support whenever you need it, please register your product on the official Scheppach website.
Figure 10: Scheppach 2-Year Service Warranty.
For technical assistance, spare parts, or warranty claims, please contact Scheppach UK LTD, the official seller. Contact details can typically be found on the Scheppach UK website or through your point of purchase.
Please have your model number (BC-PS150-X) and purchase date ready when contacting customer support.
