Introduction
Thank you for choosing the Lafocuse 12 Inch Silent Wall Clock. This clock combines traditional analog timekeeping with a modern digital display, providing month, date, day of the week, and temperature. Its silent, non-ticking movement ensures a peaceful environment. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your clock.
Setup Instructions
1. Unpacking
- Carefully remove the clock from its packaging.
- Inspect the clock for any signs of damage.
2. Battery Installation
The clock requires two batteries: one AA battery for the analog clock movement and one AAA battery for the digital LCD display. Batteries are not included.
- Locate the battery compartments on the back of the clock. There is one compartment for the clock movement (AA) and another for the LCD display (AAA).
- Insert one AA battery into the clock movement compartment, ensuring the correct positive (+) and negative (-) polarity.
- Insert one AAA battery into the LCD display compartment, ensuring the correct positive (+) and negative (-) polarity.
Image: Rear view of the Lafocuse wall clock, showing the battery compartments for the clock movement and LCD, and the hanging hook.
3. Setting the Time
- Locate the time setting knob on the back of the clock movement.
- Rotate the knob to adjust the clock hands to the correct time.
4. Setting the Date, Day, and Temperature Unit
The digital display features buttons for setting the date and adjusting the temperature unit. Refer to the detailed instructions below and the accompanying video for visual guidance.
- Press the "SET" button to enter the setting mode.
- When the "Year" display flashes, use the "UP" or "DOWN" buttons to adjust the year.
- Press "SET" again to move to the month setting, then use "UP" or "DOWN" to adjust the month.
- Repeat this process for the date.
- Continue pressing "SET" to cycle through other settings. The "Week" (day of the week) and "Temperature" will adjust automatically based on the date.
- To change the temperature unit between Fahrenheit (°F) and Celsius (°C), locate the dedicated F/C button (if available, otherwise it may be part of the SET cycle) and press it.
Image: Detailed close-up of the LCD screen on the clock, showing month, date, and temperature readings.
5. Mounting the Clock
The clock is designed for wall mounting.
- Choose a suitable location on a wall.
- Use a nail or screw (not included) appropriate for your wall type.
- Hang the clock using the integrated hanging hook located on the back of the clock.
Operating Instructions
Reading the Time
The clock displays time using traditional analog hands (hour, minute, second). The silent sweep movement ensures no ticking sound.
Reading the Digital Display
The LCD screen continuously displays the current month, date, day of the week, and temperature. Ensure the LCD battery is functional for continuous display.
Image: Close-up of the clock face showing the analog time and the digital LCD display for month, date, and temperature.
Official Product Video: Features and Setup
Video: This video demonstrates the features and setup process of the Lafocuse wall clock, including battery installation and setting the time and digital display.
Care and Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and components.
- Battery Replacement: Replace batteries when the clock hands stop moving or the LCD display fades/stops working. Always use fresh batteries of the specified type (AA for movement, AAA for LCD). Dispose of old batteries responsibly according to local regulations.
- Environment: Keep the clock away from direct sunlight, extreme temperatures, and high humidity to ensure accurate operation and longevity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock hands not moving | Dead AA battery; Incorrect battery polarity; Hands obstructed. | Replace AA battery; Check battery polarity; Ensure hands move freely. |
| LCD display is blank or dim | Dead AAA battery; Incorrect battery polarity. | Replace AAA battery; Check battery polarity. |
| Incorrect time, date, or temperature | Settings not properly configured. | Refer to "Setting the Date, Day, and Temperature Unit" section to re-set. |
| Temperature reading seems inaccurate | Clock placed near heat/cold source; Poor ventilation. | Relocate the clock to a stable room temperature area; Ensure adequate air circulation. |
Specifications
- Brand: Lafocuse
- Model: ZH0129B
- Dimensions: 12 inches (30 cm) diameter
- Display Type: Analog (time), LCD (month, date, day, temperature)
- Power Source: 1 x AA battery (for clock movement), 1 x AAA battery (for LCD display)
- Special Features: Silent non-ticking movement, wooden hands, integrated thermometer and calendar
- Material: Plastic frame, HD glass front cover, wooden hands
- Usage: Indoor
Warranty Information
This Lafocuse wall clock comes with a 3-Year Movement Assurance. If the clock experiences any quality issues related to its movement within three years from the date of purchase, please contact our customer support for a resolution. We are committed to providing a satisfactory solution as quickly as possible.
Customer Support
For further assistance, technical support, or warranty claims, please contact Lafocuse customer support through the retailer's platform or visit the official Lafocuse website for contact details.