1. Introduction
This user manual provides essential information for the safe and effective use of your DCH 4600mAh Lithium-ion Battery Replacement, model CS-ICN700BH. This battery is designed to replace original batteries in compatible Intermec devices, ensuring reliable power for your equipment.
Figure 1: Front view of the DCH 4600mAh Lithium-ion Battery Replacement, showing the model number, part number, rating, and safety warnings on the label.
2. Safety Information and Warnings
WARNING: To reduce the risk of fire or burns, read instructions in operating guide before using the battery.
- DO NOT attempt to disassemble, open, or service the battery pack.
- DO NOT crush, puncture, short external contacts, or dispose of in fire or water.
- DO NOT store above 60°C (140°F).
- Replace only with the battery pack designated for this product.
- New battery pack must be fully charged before use.
- Dispose of used batteries according to local regulations. Do not dispose of with household waste.
3. Product Features
- High Capacity: 4600mAh for extended usage.
- Voltage: 3.7V Lithium-ion battery.
- Energy: 17.02Wh.
- Compact Design: Dimensions of 76.89 x 60.64 x 16.82mm.
- Lightweight: Approximately 160.0g.
4. Compatibility
This DCH battery replacement is compatible with the following Intermec device models and battery part numbers:
Compatible Device Models:
- Intermec CN70e
- Intermec CN75E
- Intermec CN70
- Intermec CN75
Compatible Battery Part Numbers:
- 318-043-022
- 1000AB01
- 318-043-033
- 318-043-012
- 318-043-002
Important: Please ensure both your device model and existing battery part number match those listed above before purchasing or installing to ensure proper fit and function.
5. Specifications
| Attribute | Value |
|---|---|
| Model Number | CS-ICN700BH |
| Battery Part Number | 318-043-022 (and others listed in compatibility) |
| Battery Type | Lithium-ion |
| Capacity | 4600mAh |
| Voltage | 3.7V |
| Energy | 17.02Wh |
| Dimensions (L x W x H) | 76.89 x 60.64 x 16.82mm (3.03 x 2.39 x 0.66 inches) |
| Weight | 160.0g (5.6 ounces) |
6. Setup and Installation
Follow these general steps to install the replacement battery into your compatible Intermec device. Always refer to your device's specific user manual for detailed instructions if available.
- Power Off Device: Ensure your Intermec device is completely powered off before attempting battery replacement.
- Remove Old Battery: Locate the battery compartment on your device. Open it and carefully remove the old battery.
- Insert New Battery: Align the new DCH battery with the battery compartment, ensuring the contacts match correctly. Gently push the battery into place until it clicks or is securely seated.
- Secure Compartment: Close and secure the battery compartment cover.
- Initial Charge: It is recommended to fully charge the new battery before its first use. Connect your device to its charger and allow it to charge until the battery indicator shows full.
Figure 2: Back view of the DCH 4600mAh Lithium-ion Battery Replacement, showing the connection points and overall form factor for installation reference.
7. Operating the Battery
Once installed and fully charged, the battery operates seamlessly with your Intermec device. Here are some general operating guidelines:
- Regular Charging: Charge the battery regularly to maintain optimal performance. Avoid letting the battery completely drain before recharging, as this can reduce its lifespan over time.
- Temperature: Operate the device with the battery within its recommended temperature range. Extreme cold or heat can affect battery performance and longevity.
- Charging Cycle: Lithium-ion batteries do not suffer from a "memory effect," so you can charge them at any time without needing to fully discharge them first.
8. Maintenance
Proper maintenance can extend the life of your DCH replacement battery:
- Storage: If storing the battery for an extended period, store it in a cool, dry place at approximately 50% charge. Avoid storing it fully charged or fully discharged.
- Cleaning: Keep the battery contacts clean. Use a dry, soft cloth to wipe away any dust or debris.
- Avoid Physical Damage: Protect the battery from drops, impacts, and extreme pressure, which can damage internal components.
9. Troubleshooting
If you encounter issues with your DCH replacement battery, consider the following common troubleshooting steps:
- Battery Not Charging:
- Ensure the battery is correctly seated in the device.
- Check the charging cable and adapter for damage and ensure they are properly connected.
- Verify that the device's charging port is clean and free of debris.
- Try charging with a different compatible charger if available.
- Short Battery Life:
- Ensure the battery has been fully charged.
- Check for excessive background applications or device settings that might be consuming power rapidly.
- Consider the age of the battery; all rechargeable batteries have a finite lifespan.
- Device Not Powering On:
- Confirm the battery is fully charged and correctly installed.
- Attempt to power on the device while connected to the charger.
If problems persist after following these steps, please contact customer support for further assistance.
10. Warranty and Support
DCH is committed to providing quality products and customer satisfaction. This product comes with a standard warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the product packaging or contact DCH customer service.
For any questions, professional pre-sales, or after-sales service, please feel free to contact us. We are dedicated to assisting you with your product inquiries.
Contact Information: Please refer to your purchase documentation or the official DCH website for the most current contact details.