VASAGLE TV Stand ULTV121K01 Instruction Manual

Introduction

Thank you for purchasing the VASAGLE TV Stand with Power Outlets and LED Lights. This manual provides essential information for the safe assembly, operation, and maintenance of your new entertainment center. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

WARNING: Always adjust the feet to ensure stability. Do not overload the furniture; the tabletop has a maximum static load capacity of 100 lb (45 kg) and the middle shelf also has a maximum static load capacity of 100 lb (45 kg). Follow the included assembly instructions for safe installation. Keep away from children to prevent tip-over risks and injuries from small parts or sharp edges. Do not use if any parts are missing or damaged.

Package Contents

Please verify that all components listed below are present before beginning assembly:

• 1 x TV Stand with Power Outlets
• 1 x LED Light Strip
• 1 x Remote Control
• 1 x Accessory Kit (hardware for assembly)
• 1 x Instructions Manual (this document)

Setup and Assembly

Assembly is required for this TV stand. Please follow the step-by-step instructions provided in the included instruction manual. Ensure you have adequate space and a clean, flat surface for assembly. An Allen wrench is typically included in the accessory kit for most connections.

Key Assembly Steps:

1. Unpack all components and verify against the package contents list.
2. Attach the steel frame components to the particleboard shelves using the provided hardware.
3. Secure all connections firmly but do not overtighten.
4. Install the LED light strip according to the separate LED instructions.
5. Adjust the feet for stability on uneven surfaces.

Image: The assembled VASAGLE TV Stand featuring LED lighting and open storage shelves.

Image: Detailed dimensions of the TV stand, showing length, width, and height, and suitable TV sizes up to 60 inches.

Operating Instructions

Power Outlets and USB Ports:

The TV stand includes a built-in power strip with 3 AC outlets and 2 USB-A ports, connected via a 4.9 ft extension cord. Plug the extension cord into a wall outlet. You can then power your TV, media devices, and charge mobile devices directly from the stand.

Image: The integrated power strip with 3 AC outlets and 2 USB-A ports for convenient device charging and power.

LED Lights:

The integrated LED light strip offers 21 colors and 3 dynamic modes to enhance your viewing experience. Use the included remote control to select colors, adjust brightness, and choose dynamic lighting effects. Ensure the LED strip is properly connected to the power source.

Image: The TV stand illuminated by its LED lights, showcasing adjustable colors and modes.

Maintenance

To maintain the appearance and longevity of your TV stand:

• Cleaning: Wipe the surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Load Capacity: Adhere to the specified load capacities for the tabletop (max. 100 lb / 45 kg) and middle shelf (max. 100 lb / 45 kg) to prevent damage.

Troubleshooting

If you encounter issues with your TV stand, consider the following:

• Instability: Ensure the adjustable feet are properly leveled and all assembly screws are tightened.
• LED Lights Not Working: Check the power connection to the LED strip and ensure the remote control batteries are functional.
• Power Outlets Not Working: Verify the main extension cord is securely plugged into a working wall outlet.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official VASAGLE website. Ensure you have your model number (ULTV121K01) and proof of purchase ready when contacting support.