VEVOR 270 Degree Awning (Model ATSA27025) Instruction Manual

Overview

The VEVOR 270 Degree Awning provides extensive shade coverage for various outdoor activities. Designed for vehicle mounting, it offers protection from sun and rain, creating a comfortable outdoor space. This manual provides detailed instructions for the proper installation, operation, and maintenance of your awning.

Safety Information

Please be aware that this product may contain chemicals known to cause cancer and reproductive harm. Always handle with care and follow all safety guidelines during installation and use.

Package Contents

The VEVOR 270 Degree Awning package includes the following components:

• Awning fabric (280G polyester with PU 3000mm coating)
• Aluminum alloy poles
• 270° fan-shaped bracket
• Thickened wind-resistant ropes
• Luminous ground pegs
• Waterproof PVC carry bag
• Fixed Brackets * 2
• Fixed Bracket Plates * 2
• M8x20 Hexbolts * 4
• M8x55 Hexbolts * 4
• Hex Nylon Lock Nuts * 8
• Ground Stakes * 5
• Windproof ropes * 5
• Awning Cloth * 1
• Storage Bag * 1

Setup and Installation

Pre-Installation Requirements

A roof rack is required for the installation of this awning. Please confirm your vehicle is equipped with a suitable roof rack before proceeding with installation.

Bracket Assembly and Modification

The awning comes with T-slot compatible bolts for direct mounting to crossbars. If your crossbars are not T-slot compatible, a standard roof box U-bolt set (not included) can be used. The provided brackets may require modification (notching) to accommodate U-bolts and ensure a low-profile fit against aerodynamic crossbars. This modification helps in reducing wind resistance and ensuring a snug fit.

Image: Awning brackets and U-bolts laid out on a wooden table, demonstrating the components for mounting. The brackets are black metal with multiple slots and holes, and the U-bolts are black coated metal with threaded ends.

When using U-bolts, the backside of the awning brackets may need to be notched with a grinder or Dremel tool to allow the U-bolts to pass through. Ensure the notches are deep enough for the U-bolt to slide through and allow the bracket to sit directly on the crossbar for optimal aerodynamics.

Attaching Brackets to Awning

Slide the T-slot bolts (or U-bolts if modified) into the awning's track. Position the brackets according to your crossbar spacing. For optimal rain runoff, ensure the awning is mounted as close to the vehicle as possible. The zipper side of the awning bag should face downwards.

Image: A man attaching the black metal brackets to the awning's main housing, which is covered by a black PVC bag. The awning is resting on a wooden table.

Mounting Awning to Vehicle

Carefully lift the awning onto the vehicle's crossbars. It is recommended to rest the awning further forward on the crossbars initially, then slide it back into the desired position. Secure the rear brackets first, tightening them enough to hold the awning but still allow for minor adjustments. Then, secure the front brackets. Ensure all nuts are tightened securely but avoid over-tightening.

Image: An overhead view of a white SUV with the VEVOR 270 Degree Awning fully deployed, providing extensive shade to the side and rear of the vehicle.

Important Installation Tip for VEVOR Car Awning Tent: The brackets for the VEVOR Car Awning Tent are located in the top right corner of the canopy itself, not in the main bag with the other accessories. They are tucked away, so be sure to check this spot carefully during installation.

Video: A user demonstrates the installation process of the VEVOR 270 Degree Awning on a vehicle, including attaching brackets and securing the awning to the roof rack.

Operating Instructions

Deploying the Awning

To deploy the awning, unzip the PVC carry bag. Unbuckle the straps holding the awning fabric. Pull the awning fabric outwards, extending the arms until fully open. Secure the telescopic poles to the desired height and angle. Use the provided guy ropes and ground pegs to anchor the awning for stability, especially in windy conditions. For optimal rain runoff, ensure the awning is pitched at an angle.

Image: A white SUV with the VEVOR 270 Degree Awning fully deployed, providing extensive shade to the side and rear of the vehicle.

Tailgate Interaction

The 270-degree design allows for interaction with the vehicle's tailgate. It is recommended to place a soft microfiber towel or similar protective material on the awning where the tailgate might make contact to prevent scratches. For vehicles with automatic tailgates, holding the tailgate button for 2 seconds can often switch it to manual mode, allowing for controlled opening and preventing forceful contact with the awning.

Video: A user demonstrates the deployment of the VEVOR 270 Degree Awning and how it interacts with the vehicle's tailgate, highlighting the ample shaded area provided.

LED Lighting

The awning features integrated LED lights for nighttime use. These lights are powered via a USB connection, which can be plugged into your vehicle's USB port or a portable power pack. The power cable is designed to be routed internally for a clean setup. The LED lights offer both amber and white light options, adjustable by touch control.

Image: The VEVOR 270 Degree Awning deployed at night, showcasing the integrated LED lighting illuminating the shaded area.

Maintenance

To ensure the longevity of your VEVOR 270 Degree Awning, follow these maintenance guidelines:

• Cleaning: Clean the awning fabric with mild soap and water. Avoid harsh chemicals that could damage the waterproof coating.
• Drying: Always ensure the awning fabric is completely dry before packing it away to prevent mold and mildew.
• Storage: Store the awning in its waterproof PVC carry bag in a cool, dry place when not in use.
• Inspection: Periodically inspect all poles, brackets, ropes, and pegs for any signs of wear or damage. Replace damaged components as needed.

Troubleshooting

Here are solutions to common issues you might encounter:

• Water Pooling: If water pools on the awning fabric, adjust the height and angle of the poles and guy ropes to create better runoff. Ensure the awning is pitched at a sufficient angle.
• Wind Instability: In windy conditions, always use all provided guy ropes and ground pegs to securely anchor the awning. Consider adding additional telescopic poles for extra support if needed.
• Difficulty Packing: Ensure all air is expelled from the awning fabric before rolling it up. Roll tightly and evenly to fit into the carry bag.

Product Specifications

Warranty and Support

Warranty and support information for the VEVOR 270 Degree Awning is not explicitly detailed in the provided product data. Please refer to the manufacturer's official website or contact VEVOR customer service for specific warranty terms and support options.