Yaheetech 10x10ft Pop-Up Canopy Tent Instruction Manual

Product Overview

The Yaheetech 10x10ft Pop-Up Canopy Tent is designed for outdoor use, providing shade and shelter for various activities such as camping, backyard parties, beach trips, and commercial events. This canopy features integrated solar LED lights for nighttime illumination and a portable design for easy transport.

Figure 1: Fully assembled Yaheetech 10x10ft Pop-Up Canopy Tent.

Key Features:

• 17 Built-in Solar LED Lights: Provides additional lighting and ambiance, powered by a top solar panel or power bank (not included). Includes a remote control for brightness and on/off functions.
• Height-adjustable Design: Telescopic legs allow height adjustment from 8.8' to 9.4' in 4" increments using snap buttons.
• Portable & Easy-to-carry: Packs into a wheeled roller bag (10" L × 8.3" W × 45.7" H) with rubber handles for convenient transport and storage.
• Spacious Coverage: 10ft × 10ft area provides 100 square feet of shade, suitable for 6-10 people.
• Enhanced Stability: Features upgraded 4" × 4" larger feet, 12 ground stakes, 4 sandbags, and 4 guy lines for secure outdoor placement.
• Durable Construction: Made from powder-coated steel frame and silver-coated oxford polyester fabric with UPF 50+ UV protection.
• Vented Top: Designed for better air circulation.

Safety Information

Please read and understand all safety warnings and instructions before setting up or using the canopy tent. Failure to follow these instructions may result in injury or damage to the product.

• Always secure the canopy tent with all provided ground stakes, sandbags, and guy lines, especially in windy conditions.
• Do not use the canopy tent in severe weather conditions, including heavy rain, strong winds, hail, or snow. Disassemble and store the tent if adverse weather is expected.
• Keep all flame and heat sources away from the canopy fabric. The fabric is not fireproof.
• Ensure all locking mechanisms are fully engaged during setup to prevent accidental collapse.
• Supervise children around the canopy tent.
• Do not hang heavy objects from the frame.
• Regularly inspect the frame and fabric for any signs of wear or damage. Do not use if damaged.

Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, contact customer support.

Figure 2: Included components of the canopy tent.

• Pop-Up Canopy Frame (Pre-assembled)
• Canopy Top Fabric with integrated LED lights
• Wheeled Carry Bag
• Sandbags (4 pcs)
• Guy Lines (4 pcs)
• Ground Stakes (12 pcs)
• Solar Panel
• Remote Control for LED lights

Setup Instructions

Follow these steps for quick and easy installation of your canopy tent. It is recommended that two people set up the canopy.

Figure 3: Quick and easy installation steps.

1. Step 1: Unpack and Partially Unfold Frame

   Remove the canopy frame from the wheeled carry bag. Place the frame in the center of your desired setup area. With a person at each end, partially pull the frame outwards, allowing it to expand slightly.
2. Step 2: Attach Canopy Top

   Carefully place the canopy top fabric over the partially expanded frame. Ensure the solar panel opening aligns with the top center of the frame. Secure the corners of the fabric to the frame's corners.

3. Step 3: Fully Expand Frame

   From opposite sides, gently pull the frame outwards until it is fully extended and the top locks into place. You may need to push up on the center hub to fully engage the locking mechanism.

4. Step 4: Adjust Height

   Press the snap buttons on each leg and extend the telescopic legs to your desired height. Ensure all four legs are set to the same height for stability. There are three adjustable height positions available.
5. Step 5: Install Solar Panel

   Locate the solar panel and its connection cable. Plug the solar panel cable into the outlet on the canopy top. Press and tighten the solar panel onto the canopy. Rotate the solar panel until it is firmly fixed and facing upwards for optimal charging.

   

   Figure 4: Solar panel installation steps.

6. Step 6: Secure the Canopy

   Attach the sandbags to each leg of the canopy. Use the provided ground stakes to secure the feet to the ground. For additional stability, attach the guy lines to the corner rings of the canopy and stake them into the ground at an angle.

Operating Instructions

LED Lights Operation:

The canopy tent is equipped with 17 solar LED lights for illumination. These lights can be powered by the integrated solar panel or an external power bank (not included).

Figure 5: 2-Way Charging for LED Lights.

• Solar Charging: Ensure the solar panel is properly installed and exposed to direct sunlight for optimal charging during the day.
• Power Bank Charging: If solar charging is insufficient or for immediate use, connect a power bank (not included) to the charging port on the solar panel unit.
• Using the Remote Control: The included remote control operates the LED lights.
  • Press the "ON" button to turn the lights on.
  • Press the "OFF" button to turn the lights off.
  • Use the brightness adjustment buttons to increase or decrease the light intensity.

  A small storage bag is conveniently located on the canopy to store the remote control when not in use.

Figure 6: Canopy tent providing illuminated shelter at night.

Height Adjustment:

To adjust the height of the canopy, locate the snap buttons on each telescopic leg. Press the button and slide the inner leg up or down to the desired height setting. Ensure the button clicks into place at one of the three available height settings (8.8', 9.1', or 9.4'). Always adjust all four legs to the same height.

Maintenance

• Cleaning: Clean the canopy fabric with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Allow the fabric to air dry completely before folding and storing.
• Frame Care: Wipe down the steel frame with a damp cloth to remove dirt and debris. Ensure the frame is dry before storage to prevent rust.
• Storage: When not in use, disassemble the canopy and store it in its wheeled carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Solar Panel: Keep the solar panel clean and free of dust or obstructions to ensure efficient charging.
• Inspection: Periodically inspect all components for wear, tear, or damage. Check for loose screws or connections on the frame. Replace any damaged parts immediately.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Yaheetech website. Keep your proof of purchase for any warranty claims.

You can visit the Yaheetech Store on Amazon for more information and product updates.