Tefal FV 5781 Easygliss Eco Steam Iron User Manual

Introduction

Thank you for choosing the Tefal FV 5781 Easygliss Eco Steam Iron. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new steam iron. Please read these instructions carefully before first use and keep them for future reference.

Important Safety Instructions

• Always ensure the voltage indicated on the iron's rating plate matches your mains voltage.
• Do not leave the iron unattended while it is switched on or connected to the mains.
• Keep the iron and its cord out of reach of children and pets when it is switched on or cooling down.
• Never immerse the iron, power cord, or plug in water or any other liquid.
• Unplug the iron from the mains socket before filling with water, emptying, or cleaning.
• Use the iron only for its intended purpose: ironing clothes.
• Do not operate the iron if it has been dropped, if there are visible signs of damage, or if it is leaking. Contact an authorized service center.
• The soleplate can become extremely hot. Avoid contact with hot surfaces.
• Always place the iron on a stable, heat-resistant surface when resting.

Product Overview

Familiarize yourself with the components of your Tefal FV 5781 Easygliss Eco Steam Iron.

Figure 1: Front-side view of the Tefal FV 5781 Easygliss Eco Steam Iron, showcasing its white and green design, water tank, and control dial.

Figure 2: Underside view of the iron, highlighting the Durilium Airglide soleplate with its steam vents and precision tip.

Figure 3: The iron shown with its approximate dimensions: 30 cm length, 15 cm height, and 13.5 cm width at the base.

Figure 4: The iron in operation, emitting powerful steam from its soleplate, demonstrating its steam function.

Setup and First Use

1. Unpacking: Carefully remove the iron from its packaging. Remove any protective films or stickers from the soleplate.
2. Water Filling: Ensure the iron is unplugged. Open the water filling inlet and fill the water tank with tap water up to the 'MAX' level indicator. Do not overfill. For areas with hard water, consider using a mix of tap water and distilled water (50/50).
3. First Heating: Plug the iron into a suitable mains socket. Set the temperature dial to the maximum setting. Allow the iron to heat up completely. During the first use, a slight odor or smoke may be emitted; this is normal and will disappear after a short period.
4. Initial Steam Burst: To clean the steam vents, press the steam boost button a few times over an old cloth. This helps remove any manufacturing residues.

Operating Instructions

Temperature Setting

• Sort your laundry according to fabric type and recommended ironing temperature.
• Turn the temperature dial to the appropriate setting for your fabric. Refer to the fabric care labels on your garments.
• The indicator light will illuminate while the iron is heating and turn off when the desired temperature is reached.

Steam Ironing

• Ensure the water tank is filled.
• Set the temperature dial to a steam-compatible setting (usually indicated by steam symbols on the dial).
• Once the iron reaches the set temperature, you can activate the continuous steam by moving the steam control lever.
• For stubborn creases, use the Steam Boost function by pressing the dedicated button.
• The Vertical Steam function allows you to steam hanging garments. Hold the iron vertically a few centimeters from the fabric and press the steam boost button.

Dry Ironing

• If you wish to dry iron, ensure the steam control lever is set to the 'no steam' position.
• Set the temperature dial to the desired setting.

Spray Function

• Press the spray button to moisten stubborn creases. Ensure the water tank contains water.

Care and Maintenance

Cleaning the Soleplate

• After each use, allow the iron to cool down completely.
• Wipe the soleplate with a damp cloth. Do not use abrasive cleaners or metallic scouring pads, as these can damage the Durilium Airglide coating.
• If starch or synthetic fibers have melted onto the soleplate, clean it with a soft damp cloth while the iron is still warm (but unplugged).

Descaling (Self-Clean Function)

Regular descaling helps maintain optimal steam performance and prolongs the life of your iron. The Tefal FV 5781 Easygliss Eco features an integrated anti-calc system.

1. Fill the water tank to the MAX level.
2. Plug in the iron and set the temperature to maximum. Allow it to heat until the indicator light goes out.
3. Unplug the iron. Hold it horizontally over a sink.
4. Activate the self-clean function (refer to the specific button/lever on your iron, usually marked "Self Clean" or similar). Shake the iron gently over the sink until all the water and scale have been flushed out.
5. Plug the iron back in and let it heat up to dry the soleplate. Unplug and let it cool down.

Storage

• After use, unplug the iron and empty any remaining water from the tank.
• Allow the iron to cool down completely before storing.
• Store the iron vertically on its heel rest in a safe, dry place.

Troubleshooting

Specifications

• Model: Tefal FV5781 Easygliss Eco
• Brand: Tefal
• Type: Steam Iron
• Soleplate: Durilium Airglide
• Special Features: Eco-design, energy saving, Durilium Airglide soleplate
• Color: White, Green
• Dimensions (approx.): 30 cm (Length) x 15 cm (Height) x 13.5 cm (Width)

Warranty and Support

Your Tefal FV 5781 Easygliss Eco Steam Iron is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Tefal website. For technical support, spare parts, or service inquiries, please contact Tefal customer service in your region. Keep your proof of purchase for warranty claims.

Online Resources: For additional information, FAQs, and product registration, please visit the official Tefal website.