1. Introduction
Thank you for choosing the Soundcore Boom 2 by Anker. This manual provides essential information to help you set up, operate, and maintain your outdoor Bluetooth speaker. The Soundcore Boom 2 is designed to deliver powerful 80W sound with deep bass, featuring IPX7 waterproofing, a floatable design, and up to 24 hours of playtime, making it ideal for any adventure.
2. What's in the Box
- Soundcore Boom 2 Outdoor Bluetooth Speaker
- USB-C to C Charging Cable
- Safety Instructions

Image: Soundcore Boom 2 speaker shown with its included USB-C charging cable, representing the contents of the package.
3. Product Overview
3.1 Controls and Indicators

Image: Top view of the Soundcore Boom 2 speaker, highlighting the control buttons.
- Power Button: Press to turn on/off.
- Bluetooth Button: Press to enter Bluetooth pairing mode.
- Volume Down (-): Press to decrease volume.
- Play/Pause Button: Press to play or pause music.
- Volume Up (+): Press to increase volume.
- BassUp Button: Press to activate or deactivate BassUp technology for enhanced bass.
- Light Mode Button: Press to cycle through different light effects.
3.2 Ports

Image: Rear view of the Soundcore Boom 2 speaker, showing the protective flap covering the charging and output ports.
- USB-C Charging Port: For charging the speaker.
- USB-A Output Port: For charging external devices (power bank function).
Note: Ensure the protective flap covering the ports is securely closed for water resistance.
4. Setup
4.1 Charging the Speaker
- Open the protective flap on the rear of the speaker.
- Connect the USB-C charging cable to the speaker's USB-C port and to a compatible USB wall charger (not included).
- The LED indicators will show charging status. A full charge takes approximately 5.5 hours.
- Once fully charged, disconnect the cable and securely close the protective flap.
The speaker provides up to 24 hours of playtime on a single charge (actual playtime varies by volume level and audio content).

Image: Soundcore Boom 2 speaker illuminated at night in a campsite setting, symbolizing its extended battery life.
4.2 Powering On/Off
- To Power On: Press the Power button once. You will hear an audible cue.
- To Power Off: Press and hold the Power button for 2 seconds. You will hear an audible cue.
5. Operating
5.1 Bluetooth Pairing
- Power on the Soundcore Boom 2. The Bluetooth indicator will flash blue, indicating it's in pairing mode.
- On your Bluetooth-enabled device, go to the Bluetooth settings and search for