Victrola Eastwood II Record Player User Manual

1. Introduction

Welcome to the Victrola Eastwood II Record Player. This manual provides essential information for setting up, operating, and maintaining your new turntable. Please read it thoroughly to ensure proper use and to maximize your listening experience.

2. Setup

2.1 Unpacking and Placement

Carefully remove the record player from its packaging. Place the unit on a flat, stable surface away from direct sunlight, heat sources, or excessive dust. Ensure adequate ventilation around the unit.

2.2 Connecting Power

1. Connect the included power adapter to the DC IN port on the back of the record player.
2. Plug the power adapter into a wall outlet.

2.3 Component Overview

The Victrola Eastwood II is designed for easy setup, requiring no additional stereo system. It features a 3-speed belt-driven turntable, built-in stereo speakers, and an Audio-Technica AT-3600LA cartridge for quality sound reproduction.

3. Operating Instructions

3.1 Playing Vinyl Records

1. Lift the dust cover.
2. Place a vinyl record on the turntable platter.
3. Select the appropriate speed (33 1/3, 45, or 78 RPM) using the speed selector switch. For 45 RPM records, place the included 45 RPM adapter on the spindle.
4. Gently move the tonearm over the record and lower the stylus onto the record's edge. The platter will begin to spin automatically.
5. Adjust the volume using the illuminated control knob.
6. At the end of the record, the tonearm will automatically return to its rest position.

3.2 Bluetooth Streaming (Vinyl Stream Out)

The Vinyl Stream technology allows you to wirelessly stream your vinyl playback to any Bluetooth-enabled speaker or headphones.

1. Ensure your external Bluetooth device is in pairing mode.
2. Play a record on the Eastwood II.
3. The record player will automatically search for and connect to nearby Bluetooth devices. The illuminated knob will indicate connection status.

3.3 Bluetooth Input (Streaming from Phone/Tablet)

You can also stream music from your Bluetooth-enabled phone or tablet to the Eastwood II's built-in speakers.

1. Turn on the Eastwood II.
2. On your phone or tablet, search for 'Victrola Eastwood II' in your Bluetooth settings and pair.
3. Once connected, you can play music from your device through the record player's speakers.

3.4 Using RCA Outputs and Headphone Jack

The Eastwood II includes RCA Line Out ports for connecting to external audio systems and a 3.5mm Headphone/Aux Jack for private listening.

• RCA Outputs: Connect an RCA cable (not included) from the 'L' and 'R' RCA ports on the back of the unit to the corresponding audio input ports on your external amplifier or powered speakers.
• Headphone Jack: Plug standard 3.5mm headphones into the headphone jack for personal listening.

3.5 Video Overview

For a visual guide on setting up and using your Victrola Eastwood II, please refer to the official product video. This video demonstrates key features such as playing records, using the Audio Technica AT-3600L moving magnet cartridge, connecting to Bluetooth speakers and headphones via Vinyl Stream, and utilizing the RCA and headphone outputs. The video is titled 'Victrola Eastwood II Walnut' and is approximately 1 minute and 5 seconds in length.

4. Maintenance

4.1 Cleaning the Unit

Wipe the exterior of the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Keep the dust cover closed when not in use to protect the turntable from dust and debris.

4.2 Stylus Care

The stylus (needle) is a delicate component. Clean it periodically with a soft brush, brushing gently from back to front. Avoid touching the stylus with your fingers.

5. Troubleshooting

• No Power:
  Ensure the power adapter is securely connected to both the unit and a working wall outlet.
• No Sound:
  Check the volume level on the record player and any connected external speakers. Ensure the correct input source is selected on external devices. If using Bluetooth, confirm successful pairing.
• Record Skipping:
  Ensure the record player is on a stable, level surface. Clean the record and the stylus. Check for any visible damage to the record or stylus.
• Bluetooth Connection Issues:
  Make sure the record player is in the correct Bluetooth mode (Vinyl Stream Out or Bluetooth Input). Ensure the external Bluetooth device is within range and not connected to another device. Try restarting both the record player and the Bluetooth device.

6. Specifications

7. Warranty and Support

For warranty information, technical support, or service inquiries, please visit the official Victrola website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

Visit the Victrola Store on Amazon for more information.