Soundcore Q20i

Download PDF
Contents

Soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones User Manual

1. Introduction

This manual provides detailed instructions for the Soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones. Designed for an immersive audio experience, these over-ear headphones feature advanced noise cancellation, Hi-Res Audio support, BassUp technology, and extended battery life. This guide will assist you with setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Soundcore Q20i Hybrid Active Noise Cancelling Headphones and their protective case

Image 1.1: Soundcore Q20i Hybrid Active Noise Cancelling Headphones and their protective case.

What's in the Box

  • Soundcore by Anker Q20i Hybrid Active Noise Cancelling Headphones
  • Headphones Case
  • AUX Cable
  • USB-C Charging Cable (not explicitly listed but implied for charging)

2. Setup

2.1 Charging the Headphones

Before first use, fully charge your Soundcore Q20i headphones. Connect the provided USB-C charging cable to the charging port on the headphones and to a compatible USB power source. The LED indicator on the headphones will show the charging status.

  • A full charge provides up to 40 hours of playtime with Active Noise Cancellation (ANC) enabled, or up to 60 hours in normal mode.
  • For quick power, a 5-minute charge can provide approximately 4 hours of playback.
Soundcore Q20i headphones with a graphic indicating 40 hours playtime with ANC on and 60 hours playtime with ANC off

Image 2.1: The Soundcore Q20i headphones offer up to 40 hours of playtime with ANC and 60 hours without.

2.2 Powering On/Off

  • To power on, press and hold the Power button until the LED indicator lights up.
  • To power off, press and hold the Power button until the LED indicator turns off.

2.3 Bluetooth Pairing

  1. Ensure the headphones are powered off.
  2. Press and hold the Power button for approximately 5 seconds until the LED indicator flashes blue, indicating pairing mode.
  3. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
  4. Select "Soundcore Q20i" from the list of devices.
  5. Once connected, the LED indicator will turn solid blue.

2.4 Dual-Device Connection

The Soundcore Q20i headphones support simultaneous connection to two Bluetooth 5.0 devices. This allows for seamless switching between audio sources, such as listening to music on your laptop and answering a call on your phone.

  1. Connect the headphones to your first device as described in section 2.3.
  2. Disable Bluetooth on the first device. The headphones will re-enter pairing mode.
  3. Connect the headphones to your second device.
  4. Re-enable Bluetooth on your first device. The headphones will automatically connect to both devices.

2.5 Wired Connection (AUX)

For devices without Bluetooth or for Hi-Res Audio playback, use the provided 3.5mm AUX cable. Connect one end to the headphone's AUX port and the other end to your audio device's 3.5mm jack.

3. Operating the Headphones

3.1 Active Noise Cancellation (ANC)

The Q20i headphones feature Hybrid Active Noise Cancelling technology. Two internal and two external microphones work together to detect and reduce up to 90% of external noise, such as airplane engines or car sounds.

  • Press the ANC button (usually located on one of the earcups) to toggle Active Noise Cancellation on or off.
A person wearing Soundcore Q20i headphones on an airplane, enjoying noise-free travel

Image 3.1: Enjoying a quiet environment with the Q20i's Active Noise Cancellation.

3.2 Sound Features

The Soundcore Q20i headphones are equipped with oversized 40mm dynamic drivers that deliver detailed sound. They also incorporate BassUp technology for enhanced bass response.

  • BassUp Technology: Automatically analyzes audio and enhances low frequencies for a more powerful bass experience.
  • Hi-Res Audio: When connected via the AUX cable, the headphones are compatible with Hi-Res certified audio sources, providing a richer and more detailed sound.
Diagram showing a 40mm dynamic driver with BassUp and Hi-Res Audio logos

Image 3.2: The 40mm dynamic drivers deliver powerful sound with BassUp technology and Hi-Res Audio support.

3.3 App Customization

Download the Soundcore app from your device's app store to unlock additional features and customize your listening experience. The app allows for sound profile adjustments, firmware updates, and other personalized settings.

3.4 Media Controls

The headphones feature integrated media controls, typically located on the earcups, allowing you to manage playback and calls without accessing your connected device.

  • Volume Up/Down: Adjust audio volume.
  • Play/Pause: Control music playback.
  • Next/Previous Track: Skip between songs.
  • Answer/End Call: Manage phone calls.

4. Maintenance

4.1 Cleaning

  • Use a soft, dry cloth to clean the headphones.
  • Do not use any abrasive cleaners or solvents.
  • Regularly clean the earpads and headband to prevent buildup.

4.2 Storage and Protection

Always store your Soundcore Q20i headphones in the provided protective case when not in use to prevent damage.

Various Soundcore over-ear headphones, including the Q20i, fitting perfectly into the protective case

Image 4.1: The included case is designed to fit all Soundcore over-ear headphones, including the Q20i.

The headphones case offers comprehensive protection:

  • Four-Layer Full Protection: Provides robust defense against various elements.
  • Water-Resistant: Protects against splashes (excluding zipper and strap).
  • Anti-Scratch and Dust-Resistant: Keeps the headphones free from minor damage and debris.
  • Impact-Resistant: Offers protection against accidental drops or bumps.
  • Protective and Soft Fleece-Lined: Ensures the headphones are cushioned and safe inside.
  • Ergonomic Recessed Handle: For comfortable carrying and easy storage.
  • Detachable Velcro Tray: Allows for organized storage of cables and small accessories.
Diagram illustrating the four-layer full protection of the headphone case: water-resistant, anti-scratch and dust-resistant, impact-resistant, and protective fleece-lined

Image 4.2: The headphone case features four layers of protection for durability.

Dimensions of the headphone case: 8.1 inches wide, 8.5 inches tall, and 2.8 inches deep

Image 4.3: Dimensions of the protective headphone case.

A hand placing the headphone case with its ergonomic recessed handle into a bag

Image 4.4: The ergonomic recessed handle of the case allows for easy portability.

The open headphone case showing a detachable Velcro tray for accessories

Image 4.5: The detachable Velcro tray inside the case provides organized storage for cables and small items.

5. Troubleshooting

5.1 No Sound/Low Volume

  • Ensure the headphones are powered on and charged.
  • Check the volume levels on both the headphones and your connected device.
  • If using Bluetooth, ensure the headphones are properly paired and selected as the audio output device.
  • If using the AUX cable, ensure it is securely connected to both the headphones and the audio source.

5.2 Pairing Issues

  • Ensure the headphones are in pairing mode (flashing blue LED).
  • Disable and re-enable Bluetooth on your device.
  • Try unpairing the headphones from your device's Bluetooth list and then re-pairing.
  • Move the headphones closer to your device to ensure they are within Bluetooth range (10 meters).

5.3 ANC Not Working Effectively

  • Ensure the ANC feature is activated by pressing the ANC button.
  • Check that the earcups are properly sealed around your ears for optimal noise cancellation.

6. Specifications

FeatureDetail
Model NameQ20i
Item Model NumberA3004Z11
BrandSoundcore
Connectivity TechnologyWireless (Bluetooth), Wired (3.5 mm Jack)
Wireless Communication TechnologyBluetooth 5.0
Bluetooth Range10 Meters
Ear PlacementOver Ear
Noise ControlActive Noise Cancellation (Hybrid)
Audio Driver TypeDynamic Driver (40mm)
Battery Life (ANC On)Up to 40 Hours
Battery Life (Normal Mode)Up to 60 Hours
Fast Charging5 minutes charge for 4 hours playback
Control TypeMedia Control, App Control
Compatible DevicesLaptops, Desktops, Tablets, Telephones, Smart Speaker, Television, Cellphones
Water Resistance LevelNot Water Resistant
ManufacturerAnker Innovations

7. Official Product Video

Video 7.1: An official overview of the Soundcore Q20i Noise Cancelling Headphones, highlighting key features and benefits.

8. Warranty and Support

8.1 Warranty Information

Soundcore products typically come with a limited warranty. Please refer to the warranty card included with your purchase or visit the official Soundcore website for the most up-to-date warranty terms and conditions. Keep your proof of purchase for warranty claims.

8.2 Customer Support

For technical support, troubleshooting assistance, or any inquiries regarding your Soundcore Q20i headphones, please contact Soundcore customer service. Contact information can usually be found on the official Soundcore website or in the product packaging.

© 2024 Soundcore. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.