Eridanus One Piece Toilet Instruction Manual

1. Introduction

Thank you for choosing the Eridanus One Piece Toilet. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new toilet. Please read this manual thoroughly before beginning installation or use to ensure optimal performance and longevity of the product.

The Eridanus One Piece Toilet features a sleek design, ADA compliant height, powerful dual flush system, and a soft-closing seat for enhanced comfort and convenience.

2. Safety Information

WARNING:

• Read the included manual thoroughly prior to installation.
• Always wear safety equipment, such as gloves and eye protection, during installation.
• The overall package weighs over 100 pounds. Two people are required to carefully unpack and handle the product to avoid personal injuries or accidental damage to the item.
• Observe all plumbing and building codes in accordance with your state and local requirements.
• Ensure the installation area is clear of obstructions and that plumbing fixtures are located where legally required before installation begins.

3. What's in the Box

Verify that all components are present before beginning installation:

• Toilet
• Floor Bolts
• Wax Ring
• Installation Instruction Manual
• Flushing Mechanism
• Toilet Seat

4. Tools Required

The following tools are required for installation:

• Wax Ring Gasket
• Wrench
• Mounting Bolt Kit
• Side Cover Set
• Screwdriver

5. Installation Guide

Follow these steps carefully for proper installation of your Eridanus One Piece Toilet:

1. Lock the mounting bolts into position: Secure the mounting bolts onto the floor flange.
2. Apply the wax ring gasket: Evenly apply the wax ring gasket around the rear of the trapway on the bottom of the toilet.
3. Position the toilet on the floor flange: Carefully lower the toilet onto the floor flange, aligning the bolts with the holes in the toilet base.
4. Install the washers and nuts onto the bolts: Secure the toilet to the floor flange using the provided washers and nuts. Tighten firmly but do not overtighten.
5. Connect the supply line: Connect the water supply line (not included) to the fill valve at the back of the toilet. Ensure a tight, leak-free connection.
6. Perform a flush test: Once the water supply is connected and the tank fills, perform a test flush to check for any leaks and ensure proper flushing operation.
7. Assemble cover caps: Assemble and install the side cover caps to conceal the mounting bolts.
8. Install the seat hinges: Place the seat hinges onto the designated holes on the toilet bowl.
9. Align the pre-drilled holes on the seat with the hinges: Carefully align the toilet seat with the installed hinges.
10. Adjust the seat to align with the bowl: Ensure the seat is properly centered and aligned with the toilet bowl.
11. Fasten the hinge and put the cover on: Secure the hinges and place the decorative covers over them.
12. Install the seat cover: Gently lower the soft-closing seat into place.

6. Operating Instructions

The Eridanus One Piece Toilet is designed for efficient and powerful flushing with water conservation in mind.

• Dual Flush System: The toilet features dual flush options (1.1/1.6 GPF - Gallons Per Flush). Use the smaller button for liquid waste (1.1 GPF) and the larger button for solid waste (1.6 GPF) to optimize water usage.
• Siphon Turbo Flush Technology: This technology ensures a 360° all-round washing with every flush, providing a powerful and thorough cleaning of the bowl.
• Soft-Closing Seat: The soft-close seat ensures a quiet and gentle closing, preventing loud slams and extending the life of the seat.

7. Maintenance

Regular cleaning and maintenance will help keep your Eridanus toilet in excellent condition.

• Cleaning: The one-piece design and fully skirted trapway simplify cleaning. Use a soft cloth and mild, non-abrasive cleaners. Avoid harsh chemicals or abrasive pads that can damage the ceramic surface or seat finish.
• Seat Removal: For thorough cleaning, the quick-release seat can be easily detached by pressing the release buttons and gently pulling the seat upwards.
• Flushing Mechanism: Periodically inspect the flushing mechanism for any debris or mineral buildup. The patent self-cleaning and clog-free technology helps maintain performance.

8. Troubleshooting

If you encounter any issues with your Eridanus toilet, please refer to the following common troubleshooting tips:

• Weak Flush: Check the water level in the tank. Ensure the fill valve is fully open and the water supply line is not kinked. Verify that the flush valve is operating correctly and not obstructed.
• Continuous Running Water: Inspect the flapper or flush valve for proper sealing. Ensure the fill valve is not overfilling the tank. Adjust the float if necessary.
• Leaks: Check all connections for tightness, especially the supply line and the bolts securing the toilet to the floor. Inspect the wax ring for proper seal. If leaks persist, professional assistance may be required.
• Slow Tank Fill: Ensure the water supply valve is fully open. Check the fill valve for any blockages or debris.

For issues not covered here, please contact Eridanus customer support.

9. Specifications

10. Warranty and Support

Eridanus toilets come with lifetime after-sales service and a One-year limited warranty. The One-year limited warranty covers the flushing mechanism and the Soft-Closing toilet seat lid. For any inquiries or support, Eridanus commits to responding to messages within 24 hours.

For further assistance, please visit the official Eridanus website or contact their customer service directly.