Introduction
This manual provides essential instructions for the safe and effective use of your Gospire Heated Fogless LED Shower Mirror. Please read thoroughly before operation to ensure proper functionality and longevity of your product.
Important Safety Instructions
Always ensure the suction cup is firmly attached to the wall. Be cautious when using the razor hanger to avoid cuts. Never install the mirror in an area where it could fall and cause injury. Keep the mirror away from direct contact with water when not in use, especially the charging port area when not actively charging.
Package Contents
- Gospire Heated Fogless LED Shower Mirror
- Suction Cup Mount
- Detachable Razor Holder
- USB-C Charging Cable (Adapter not included)
- Optional Round Sticker (for uneven surfaces)
- User Manual
Product Specifications
| Brand | Gospire |
| Product Dimensions | 8.54"L x 6.38"W |
| Frame Material | Acrylonitrile Butadiene Styrene (ABS) |
| Material | Glass |
| Item Weight | 1.23 pounds (0.56 Kilograms) |
| Special Feature | Cordless, Dimmable, Lighted, Touch Sensor |
| Battery | 5000 mAh Lithium Polymer (included) |
| Charging Time | Approximately 6 hours |
| Operating Time (Fogless & Light) | Up to 3 hours |
| Operating Time (Fogless only) | Up to 3.6 hours |
| Mounting Type | Wall Mount (Suction Cup) |
| Rotation | 80° Vertical |
Setup & Installation
Ensure the wall surface is clean, dry, and smooth (e.g., ceramic tile, glass, marble, acrylic). Avoid painted walls, cement walls, uneven tiles, or stone brick for optimal adhesion.
Installation Steps:
- Wipe the wall surface thoroughly to ensure it is dry and smooth.
- Press the suction cup firmly onto the desired smooth wall surface to expel air and ensure adhesion.
- Install the razor hanger into the slot behind the mirror.
- Effortlessly hang up the mirror onto the suction cup mount.
- Reminder: Periodically check the suction cup's firmness (every 2-3 months) or re-fix it after wiping the wall.
- Optional Sticker Use: If the suction cup does not adhere well, peel off the protective film from the included round sticker, stick the sticky side to the wall, and then fix the suction cup onto the sticker.
Operating Instructions
Powering On/Off & Fogless Function
To turn on the light and activate the fogless function, press and hold the touch switch for 1 second. The fogless function indicator will illuminate blue. To turn off the fogless function, tap the touch switch.
The heated fogless function requires 40-60 seconds for preheating and 1-2 minutes to start defogging. It features a 30-minute auto-turn-off and overheat protection for safety.
Light & Brightness Adjustment
Tap the light switch to turn the lights On or Off. To adjust light brightness, press and hold the light switch for 3 seconds. The mirror will remember your last brightness setting.
Charging
The mirror has a built-in 5000 mAh rechargeable lithium polymer battery. A full charge takes approximately 6 hours.
When charging, remove the mirror from the shower and avoid using it in the bathroom to prevent water from entering the charging port. The charging port is waterproof when closed.
Maintenance
Regularly clean the mirror surface with a soft, damp cloth. Avoid abrasive cleaners.
As mentioned in installation, periodically check the suction cup for firmness and re-fix if necessary to maintain secure attachment.
Troubleshooting
Mirror Fogging
Ensure the fogless function is activated by pressing and holding the touch switch for 1 second. Allow 1-2 minutes for the heating element to fully defog the mirror.
Suction Cup Not Holding
Ensure the wall surface is clean, dry, and smooth. Re-apply the suction cup firmly, expelling all air. Consider using the provided round sticker for better adhesion on challenging smooth surfaces.
Light Not Working
Check the battery level. Recharge the mirror if the battery is low.
Accidental Activation
The mirror's sensor is sensitive. Water droplets during showers may accidentally activate the light/defog feature. This is not a quality issue.
Warranty & Customer Support
This product comes with a manufacturer's warranty. For any issues or inquiries, please feel free to contact Gospire customer service. We are committed to providing satisfactory service and will respond as soon as possible.