1. Introduction
This manual provides essential information and instructions for the proper use and care of your EasyKeys Replacement Key for Pundra SP22 locks. This key is specifically designed to replace lost or damaged keys for Pundra SP1 - SP230 series locks and is compatible with Shaw Walker manufactured locks.
It is crucial to verify your existing lock code and manufacturer to ensure compatibility before attempting to use the replacement key.
Image 1.1: The EasyKeys Replacement Key for Pundra SP22. This image displays the physical appearance of the replacement key, which is made of brass and features the SP22 code.
2. Setup and Compatibility Verification
Before using your new replacement key, it is imperative to confirm that it matches your lock's specifications. Incorrect key usage can damage the lock or the key itself.
2.1. Verify Lock Code and Manufacturer
The EasyKeys Replacement Key is cut to the SP22 code and is compatible with Pundra SP1 - SP230 series locks and Shaw Walker manufactured locks. To ensure proper function, locate the code on your existing key or lock mechanism and confirm it is SP22.
Image 2.1: Guide to Locating Your Lock Code. This diagram illustrates various common locations where a lock code can be found: directly on the key, on the lock face, on a label inside or behind the lock mechanism, or on a label affixed to the cabinet or door. It also highlights important notes regarding manufacturer-specific codes and key cut variations.
Important Notes:
- Manufacturer Specificity: Lock codes are often specific to the manufacturer. Ensure your lock is from Pundra (SP1-SP230 series) or Shaw Walker.
- Key Cut Variations: Even if codes appear similar, key cuts can vary significantly between different brands. This key is specifically for the SP22 code for Pundra/Shaw Walker.
3. Operating Instructions
Using your replacement key is straightforward once compatibility is confirmed.
- Insert the Key: Gently insert the key into the lock's keyway. Do not force the key. If it does not slide in smoothly, re-check the key code and lock type.
- Turn the Key: Once fully inserted, turn the key clockwise or counter-clockwise (depending on the lock mechanism) to engage or disengage the lock.
- Remove the Key: After operating the lock, return the key to its original position (usually vertical) and gently pull it out.
If the key does not turn or feels stiff, do not apply excessive force. Refer to the Troubleshooting section.
4. Maintenance
Proper care will extend the life of your key and ensure reliable operation.
- Keep Clean: Periodically wipe the key with a soft, dry cloth to remove dirt or debris.
- Avoid Damage: Do not use the key for purposes other than operating the lock. Avoid bending or scratching the key.
- Storage: Store the key in a dry place, away from extreme temperatures or corrosive materials.
- Lubrication (Optional): If the lock mechanism becomes stiff, a small amount of graphite lubricant designed for locks can be applied to the lock, not directly to the key. Consult a locksmith if unsure.
5. Troubleshooting
If you encounter issues with your replacement key, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert fully. | Incorrect key code or lock type; obstruction in keyway. | Verify the lock code (SP22) and manufacturer (Pundra/Shaw Walker). Check the keyway for debris and gently remove if present. Do not force the key. |
| Key inserts but does not turn. | Incorrect key cut; worn lock mechanism; internal obstruction. | Re-verify compatibility. If the key is correct, the lock mechanism may be faulty or require professional servicing. |
| Key feels stiff or difficult to turn. | Lack of lubrication in the lock; minor misalignment. | Apply a small amount of graphite lubricant to the lock mechanism. Wiggle the key gently while turning. |
If problems persist after following these steps, contact customer support for further assistance.
6. Product Specifications
| Brand | EasyKeys |
| Model Name | SP22 |
| Part Number | SP22-pundra-key-619103 |
| Compatible Lock Series | Pundra SP1 - SP230 |
| Compatible Manufacturers | Shaw Walker |
| Material | Brass |
| Special Features | Custom Cut Key, Durable |
| Item Dimensions (L x W x H) | 0.5 x 0.5 x 1 inches |
| Item Weight | 4 ounces |
| Included Components | 1 Key |
7. Warranty and Support
For any questions, concerns, or issues not covered in this manual, please contact EasyKeys customer support. While specific warranty details are not provided in this document, EasyKeys is committed to customer satisfaction.
Please have your product details (Model: SP22, Part Number: SP22-pundra-key-619103) ready when contacting support to facilitate a quicker resolution.
You can visit the EasyKeys Store on Amazon for more information or to contact their support team.
