onerbl Car DC Adapter User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your onerbl Car DC Adapter. This adapter is designed to power Resvent iBreeze APAP and CPAP machines from a vehicle's DC power outlet. Please read this manual thoroughly before use and retain it for future reference.

Image 1: The onerbl Car DC Adapter, featuring a car cigarette lighter plug on one end and a DC barrel connector on the other, connected by a black cable.

2. Safety Instructions

To ensure safe operation and prevent damage to the adapter or your CPAP machine, observe the following safety precautions:

• Use only with compatible Resvent iBreeze APAP/CPAP machines as specified.
• Ensure the vehicle's DC outlet provides the correct voltage (typically 12V DC).
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to severe impact.
• Do not attempt to open or modify the adapter. This will void the warranty and may cause electrical hazards.
• Disconnect the adapter from the vehicle's DC outlet when not in use to prevent battery drain.
• Keep out of reach of children.
• The adapter features Over Voltage Protection and Over Heat Protection to safeguard your devices.

Image 2: Illustration of the adapter's smart chip providing multiple protection features, including short-circuit, over-voltage, and over-current protection.

3. Package Contents

Your package should contain the following item:

• 1 x onerbl Car DC Adapter (Model: JE01-40-006HM, DA60-220S24-W1, DA60220S24W1)

4. Specifications

Image 3: Depiction of quality control and durable design, highlighting copper wire and PVC jacket construction for enhanced longevity.

Image 4: Visual comparison of cable lengths, illustrating the extended cord design for flexible placement.

5. Setup and Installation

1. Verify Compatibility: Ensure your Resvent iBreeze APAP/CPAP machine is listed as compatible with this DC adapter.
2. Connect to CPAP Machine: Insert the DC barrel connector end of the adapter firmly into the power input port of your Resvent iBreeze CPAP machine.
3. Connect to Vehicle: Insert the car cigarette lighter plug end of the adapter into your vehicle's 12V DC power outlet. Ensure a secure connection.
4. Power On: Once connected, your CPAP machine should receive power. Refer to your CPAP machine's manual for specific power-on procedures.

6. Operating Instructions

Once properly installed, the onerbl Car DC Adapter provides continuous power to your compatible Resvent iBreeze CPAP machine. Operation is straightforward:

• Ensure the vehicle's engine is running or the vehicle's accessory power is active to provide power to the DC outlet.
• Monitor your CPAP machine's power indicator to confirm it is receiving power.
• If using the adapter for extended periods with the vehicle's engine off, be aware of potential vehicle battery drain. It is recommended to use the adapter with the engine running or to monitor your vehicle's battery level.

7. Maintenance and Care

To maintain the longevity and performance of your onerbl Car DC Adapter:

• Keep the adapter clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Store the adapter in a cool, dry place when not in use.
• Avoid kinking or sharply bending the cable.
• Regularly inspect the cable and connectors for any signs of damage. If damage is observed, discontinue use immediately.

8. Troubleshooting

9. Warranty and Support

onerbl products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and to obtain support, please refer to the product packaging or contact onerbl customer service directly.

For technical assistance or warranty claims, please contact your retailer or the manufacturer using the contact information provided with your purchase.