1. Introduction
This manual provides essential instructions for the safe and effective use, maintenance, and care of your FREDORCH FR-ZM01 Male Masturbator Cup. This product is designed as an accessory for the FREDORCH "FR Series" premium sex machine thrusting gun, featuring a self-lock anti-rotation system. It also includes a vibrating function for enhanced experience. Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Information
- For Adult Use Only: This product is intended for adult use only. Keep out of reach of children.
- Personal Hygiene: Always clean the product thoroughly before and after each use to maintain hygiene.
- Lubrication: Use only water-based lubricants with this product. Oil-based lubricants can damage the TPE material.
- Charging: Use only the provided charging cable. Do not use damaged cables or chargers. Ensure the charging port is dry before connecting.
- Storage: Store in a clean, dry place away from direct sunlight and extreme temperatures.
- Discontinue Use: If you experience any discomfort, irritation, or pain during use, discontinue immediately and consult a healthcare professional.
3. Product Overview
The FREDORCH FR-ZM01 Male Masturbator Cup is designed for compatibility with FREDORCH "FR Series" machines and can also be used handheld. It features a realistic 3D textured sleeve made from Thermoplastic Elastomer (TPE) and an integrated vibrating egg.
Components:
- Outer Casing (Black)
- Removable TPE Inner Sleeve
- Vibrating Egg (Rechargeable)
- Anti-Rotation Connector (for machine attachment)
- USB Charging Cable (for vibrating egg)
Dimensions:
The product measures approximately 2.76 inches (7 cm) in diameter and 10.63 inches (27 cm) in length. The inner sleeve is approximately 8.66 inches (22 cm) long.
Image: FREDORCH FR-ZM01 Male Masturbator Cup showing approximate dimensions of the outer casing (25cm length, 7cm top diameter, 8.3cm bottom diameter) and the inner sleeve (22cm length, 7.6cm top diameter).
4. Setup
4.1 Charging the Vibrating Egg
- Locate the small charging hole on the side of the outer casing, near the power button.
- Insert the 2.5 pinhole charging cable into the charging hole.
- Connect the USB end of the cable to a suitable USB power source (e.g., computer, USB wall adapter).
- Allow the vibrating egg to charge fully. A full charge typically provides approximately 1 hour of use.
Image: Close-up view of the FREDORCH FR-ZM01 showing the power on/off & vibration button and the charging hole with the 2.5 pinhole charging line connected.
4.2 Attaching to FREDORCH "FR Series" Machine
The FR-ZM01 cup features a custom anti-rotation interface system designed for secure attachment to FREDORCH "FR Series" machines.
- Ensure your FREDORCH "FR Series" machine is powered off and stable.
- Align the anti-rotation connector at the base of the masturbator cup with the corresponding attachment point on your machine.
- Gently push and twist until the self-lock system engages, securing the cup firmly in place.
- Before use, gently pull on the cup to confirm it is connected tightly and will not detach during operation.
Image: Step-by-step guide illustrating how to attach the masturbator cup adapter onto the machine and check for tightness before use. It shows the cup being screwed onto the machine's arm.
Image: Detailed views of the FREDORCH Anti Rotation Interface Systems, showing the self-lock decagon anti-rotation connector, its adaptive design, and how it connects for easier and more stable use. Users should confirm connector matches their device.
5. Operating Instructions
5.1 Powering On/Off and Vibration Control
- Power On: Long press the power button (located near the charging hole) for 1.5 seconds to turn on the vibrating egg. The N20 motor will start in its first vibration frequency mode.
- Adjust Vibration: Press the power button briefly to cycle through the 3 speeds and 7 frequency modes.
- Power Off: Long press the power button for 1.5 seconds to shut down the vibrating egg.
Image: Internal view of the FREDORCH FR-ZM01 showing the vibrating egg and various vibration patterns, illustrating the 3-speed and 7-frequency modes.
5.2 Usage
- Apply a generous amount of water-based lubricant to the entrance and inside the TPE sleeve.
- If using with a FREDORCH machine, ensure the cup is securely attached. Operate the machine according to its own instruction manual.
- If using handheld, hold the outer casing firmly.
- Adjust vibration settings as desired during use.
6. Maintenance and Cleaning
Proper cleaning and maintenance are crucial for hygiene and product longevity.
- Disassembly: Carefully remove the TPE inner sleeve from the outer casing. The vibrating egg can also be removed from the sleeve for separate cleaning.
- Cleaning the Sleeve: Flush the TPE inner sleeve thoroughly under running warm water with mild soap. Ensure all lubricant residue is removed.
- Cleaning the Casing: Wipe the outer casing with a damp cloth and mild soap. Do not submerge the outer casing in water, especially the charging port area.
- Cleaning the Vibrating Egg: Wipe the vibrating egg with a damp cloth and mild soap. Do not submerge it in water.
- Drying: Air dry all components completely before reassembly. You may use a soft, lint-free cloth or a blow dryer on a cool setting for the TPE sleeve. Ensure no moisture remains, especially in the charging port area.
- Reassembly: Once all parts are completely dry, carefully reinsert the vibrating egg into the TPE sleeve, then place the sleeve back into the outer casing.
- Storage: Store the clean and dry product in a clean, dry place away from direct sunlight, extreme temperatures, and dust.
Image: Illustration showing the FREDORCH FR-ZM01 disassembled for cleaning, highlighting the removable inner sleeve and the charging port. It also shows the product's rechargeable and portable nature.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vibration not working or weak | Low battery or not charged. | Ensure the vibrating egg is fully charged as per Section 4.1. |
| Difficulty attaching to machine | Incorrect alignment or incompatible machine. | Ensure proper alignment and confirm your machine is a FREDORCH "FR Series" model. Refer to Section 4.2. |
| Product difficult to clean/dry | Improper disassembly or drying method. | Ensure the inner sleeve is fully detached and air-dried completely. A blow dryer on a cool setting can assist. Refer to Section 6. |
| Product feels sticky or damaged | Use of oil-based lubricants. | Only use water-based lubricants. Oil-based lubricants can degrade TPE material. |
8. Specifications
- Model Number: FR-ZM01
- Product Dimensions: 2.76 x 2.76 x 10.63 inches (7 x 7 x 27 cm)
- Product Weight: 1.57 Pounds (approx. 0.71 kg)
- Material: Thermoplastic Elastomer (TPE)
- Battery: 1 Lithium Ion battery (250mAh), included
- Vibration Modes: 3 Speeds, 7 Frequencies
- Battery Life: Approximately 1 hour (on a full charge)
- Compatibility: Designed for FREDORCH "FR Series" premium sex machines with Self Lock system.
9. Warranty and Support
For warranty information or technical support, please refer to the FREDORCH official website or contact the seller directly through your purchase platform. Please have your model number (FR-ZM01) and purchase details ready when contacting support.
You can visit the official FREDORCH store for more information: FREDORCH Store