COMNOVA AUTOPART 95835K65-BLK

COMNOVA Aluminum Running Boards User Manual

For 2024-2026 Toyota Tacoma Double Cab (Model 95835K65-BLK)

Brand: COMNOVA AUTOPART

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your COMNOVA Aluminum Running Boards. Please read this manual thoroughly before installation and use to ensure proper fitment and safe operation. These running boards are specifically designed for the 2024-2026 Toyota Tacoma Double Cab (4 full-size doors) model. They are not compatible with Access Cab (2 half-size rear doors) or Tundra models.

COMNOVA Aluminum Running Boards product overview

Figure 1: COMNOVA Aluminum Running Boards product overview.

Toyota Tacoma Double Cab vs Access Cab fitment guide

Figure 2: Ensure your vehicle is a Double Cab for proper fitment.

2. Parts List

Before beginning installation, verify that all components listed below are present in your package:

  • Two (2) Step Bars (one left, one right)
  • Eight (8) Mounting Brackets
  • Hardware (bolts, washers, nuts)
  • Installation Instructions

Video 1: Overview of running boards and components for 2024-2025 Tacoma.

3. Setup & Installation

Installation is a direct bolt-on process, requiring no drilling. Each step bar is secured with 4 brackets.

  1. Identify Mounting Points: Locate the factory mounting points on the underside of your vehicle's chassis. These are typically pre-threaded holes.
  2. Attach Brackets: Secure the eight mounting brackets to the vehicle's frame using the provided hardware. Ensure the brackets are oriented correctly (e.g., angled ends facing forward). Do not fully tighten bolts at this stage to allow for adjustment.
  3. Position Running Boards: Carefully lift each step bar and align the sliders on the running board with the mounting holes on the brackets. The slider design allows for forward and backward adjustment to achieve your desired position.
  4. Secure Running Boards: Once the step bars are aligned, insert the remaining hardware through the sliders and into the brackets.
  5. Final Tightening: Adjust the running boards to your preferred position. Ensure they are level and securely in place. Then, fully tighten all bolts on the brackets and the step bars. Do not overtighten.
Installation flexibility with slide design

Figure 3: The slider design allows for flexible positioning of the running boards.

Video 2: Detailed installation guide for Tacoma 2024+ running boards.

Video 3: Comprehensive installation video for 2024 Toyota Tacoma Double Cab running boards.

4. Operating Instructions

The COMNOVA Aluminum Running Boards provide a stable and secure step for easier entry and exit from your truck. The 6.5-inch width offers ample foot room, and the non-slip plastic pads enhance safety.

Foot on running board showing 6.5 inch width

Figure 4: The 6.5-inch wide step provides ample foot room.

Non-slip plastic pads with COMNOVA logo

Figure 5: Non-slip plastic pads increase friction for safer use.

Each step bar with 4 brackets can support up to 500 LBS. Always step onto the running boards carefully, ensuring your footing is secure before applying full weight.

Load-bearing capacity of 500 LBS

Figure 6: The running boards are designed to support up to 500 LBS.

5. Maintenance

The running boards are constructed from aluminum with a unique powder coating, providing excellent resistance to rust and corrosion, even in harsh weather conditions. The curved baffle design helps prevent sand and gravel from accumulating underneath your truck.

Aluminum material benefits for different climates

Figure 7: Aluminum construction offers superior anti-corrosion and anti-rust properties.

Curved baffle design to resist sand and gravel

Figure 8: The curved baffle design helps protect your vehicle from road debris.

To maintain the appearance and longevity of your running boards, regularly clean them with mild soap and water. Avoid using abrasive cleaners or harsh chemicals that could damage the powder coating.

6. Troubleshooting

This product is designed for straightforward installation and reliable performance. If you encounter any issues during installation or use, please re-verify all connections and ensure proper alignment as per the installation steps. For further assistance, contact COMNOVA AUTOPART customer support.

7. Specifications

  • Model: 95835K65-BLK
  • Brand: COMNOVA AUTOPART
  • Color: Aluminum-Black
  • Material: Aluminum
  • Exterior Finish: Dual-Stage Textured Black Powder Coated with Glitter
  • Item Dimensions (L x W x H): 75 x 6.5 x 2 inches
  • Item Weight: 50 Pounds
  • Weight Limit: 500 Pounds
  • Vehicle Service Type: 2024-2026 Tacoma Double Cab with 4 Full-size Doors
  • Automotive Fit Type: Vehicle Specific Fit

8. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official COMNOVA AUTOPART website. Keep your purchase receipt for warranty claims.

© 2024 COMNOVA AUTOPART. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.