Rfiver Swivel Floor TV Stand User Manual

Introduction

Thank you for choosing the Rfiver Swivel Floor TV Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new TV stand. Designed for 32-60 inch TVs weighing up to 88 lbs, this stand offers optimal viewing angles with its 70-degree swivel and flexible height adjustment, all while saving space with its uniquely designed wood base.

Image: The Rfiver Swivel Floor TV Stand with a television mounted, highlighting its modern aesthetic and compact footprint.

Safety Information

Please read all safety warnings and instructions carefully before assembly and use. Failure to do so may result in property damage, serious injury, or death.

• Weight Capacity: Do not exceed the maximum weight capacity of 88 lbs (40 kg). This stand is designed for TVs between 32 and 60 inches.
• VESA Compatibility: Ensure your TV's VESA mounting pattern is between 100x100mm and 400x400mm.
• Stability: Always place the TV stand on a flat, stable, and level surface. Do not place heavy objects on the base or allow children to climb on the stand.
• Cable Management: Route all cables neatly through the integrated cable management system to prevent tripping hazards and damage to cables.
• Assembly: Follow all assembly instructions precisely. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

Image: A visual comparison demonstrating the superior stability of the Rfiver TV stand's base design, preventing tilting and falling.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. Refer to the included hardware pack for specific component identification.

• Main Support Column
• Wood Base Panel
• TV Mounting Bracket (VESA compatible)
• Base Support Feet (with non-slip pads)
• Cable Management Clips/System
• All necessary screws, washers, and tools for assembly
• Instruction Manual

Assembly Instructions (Setup)

Assembly of the Rfiver Swivel Floor TV Stand is designed to be straightforward and typically takes about 15 minutes. No drilling into walls is required.

1. Attach Base Support Feet: Secure the non-slip base support feet to the underside of the wood base panel using the provided screws. Ensure they are firmly attached for maximum stability.
2. Connect Main Support Column to Base: Align the main support column with the designated mounting points on the wood base. Fasten securely with the appropriate hardware.
3. Assemble TV Mounting Bracket: Attach the two vertical TV mounting arms to the horizontal bracket. Ensure the arms are oriented correctly for your TV's VESA pattern.
4. Attach Mounting Bracket to Column: Secure the assembled TV mounting bracket to the top of the main support column. This connection allows for the swivel feature.
5. Mount TV to Bracket: Carefully lift your TV and align its VESA holes with the mounting arms. Secure the TV to the bracket using the appropriate screws and spacers for your TV model. Ensure the TV is centered and level.
6. Cable Management: Utilize the integrated cable management system along the main support column to neatly route and conceal your TV's power and HDMI cables.

Image: The underside of the stand's base, illustrating the secure attachment of supporting feet and non-slip pads for enhanced stability.

Image: The TV stand fitting snugly behind a TV console, showcasing its space-saving design ideal for various room layouts, including corners and apartments.

Operating Instructions

The Rfiver Swivel Floor TV Stand offers flexible viewing options for enhanced comfort.

• Swivel Function: The TV stand allows for a 70-degree swivel range (35 degrees left and 35 degrees right). Gently push the TV screen to rotate it to your desired viewing angle. This feature helps minimize glare and provides optimal viewing from various positions in the room.
• Height Adjustment: The stand features 3 height settings, adjustable in 1.97-inch (50 mm) increments, providing a total of 5.9 inches of vertical adjustability. To change the height, carefully lift the TV mounting bracket and reposition it to the desired height setting on the main support column. Ensure the locking mechanism is engaged after adjustment.
• Cable Management: Utilize the cable clips or channels along the back of the main column to keep all TV and media device cables organized and out of sight. This contributes to a cleaner aesthetic and prevents tangles.

Image: A diagram illustrating the 70-degree swivel capability of the TV stand, allowing for flexible viewing angles.

Image: A visual representation of the multi-level height adjustment feature, enabling users to set the TV at an ergonomic eye level.

Maintenance

Regular maintenance will help ensure the longevity and safe operation of your TV stand.

• Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Hardware Check: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Base Inspection: Inspect the wood base and support feet for any signs of wear or damage. Ensure the non-slip pads are intact.

Troubleshooting

If you encounter any issues with your Rfiver Swivel Floor TV Stand, refer to the common problems and solutions below.

Specifications

• Model: Swivel Floor TV Stand (B0CZ8MBV8Q)
• Brand: Rfiver
• Compatible TV Sizes: 32 to 60 inches
• Maximum Weight Capacity: 88 lbs (40 kg)
• VESA Mounting Patterns: 100x100mm to 400x400mm
• Swivel Range: 70 degrees (35 degrees left/right)
• Height Adjustment: 3 settings, 1.97 inch (50 mm) increments, 5.9 inches total adjustability
• Base Dimensions: 16.7 x 12.7 x 1 inch (wood panel)
• Material: Metal (column, bracket), Wood (base)
• Color: Black
• Item Weight: Approximately 14.56 pounds
• Package Dimensions: 17.44 x 13.23 x 4.96 inches

Image: A comprehensive diagram detailing the wide compatibility of the TV stand, including supported screen sizes, maximum load, and VESA mounting patterns.

Warranty and Support

Rfiver is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For any questions, concerns, or assistance with assembly or product operation, please contact Rfiver customer service directly. Our team is ready to provide immediate support.

Contact Information: Please refer to the contact details provided on the product packaging or the official Rfiver website for the most up-to-date support information.