Memphis MS25
Memphis Audio MS25 M Series 2.5-inch Tweeters with Inline Crossovers Instruction Manual
Brand: Memphis Audio | Model: MS25
1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Memphis Audio MS25 M Series 2.5-inch Tweeters with Inline Crossovers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
2. Product Features
- Exceptional Audio Performance: Experience remarkable sound quality with the M Series MS25, featuring a high-strength carbon fiber cone and premium rubber surround for precise and immersive audio.
- Versatile Compatibility: Designed to seamlessly fit into various OEM vehicle locations including GM, Ford, Mercedes, and Toyota, ensuring a perfect integration into your car audio system.
- Hassle-Free Installation: With its direct OEM replacement adapter, upgrading your car audio system is a breeze, providing a hassle-free installation process without any modifications required.
- Enhanced Listening Experience: Equipped with a 6dB highpass crossover, the MS25 delivers optimized sound separation and clarity, allowing you to enjoy your favorite music with enhanced detail and depth.
- Durable Construction: Built to withstand the rigors of daily use, the MS25 features a high-quality construction with a neo magnet, ensuring long-lasting performance.
3. What's in the Box
The Memphis Audio MS25 package includes:
- MS25 Tweeters (Pair)
- Inline Crossovers
- Mounting Hardware (as pictured)
Figure 1: Package contents of the Memphis Audio MS25 Tweeters.
4. Setup and Installation
Installation of the Memphis Audio MS25 tweeters is designed to be straightforward, especially for OEM replacement. It is recommended to consult a professional car audio installer if you are unfamiliar with car audio wiring or installation procedures.
4.1 Pre-Installation Checklist
- Ensure your vehicle's ignition is off and the battery is disconnected.
- Gather necessary tools (screwdrivers, wire strippers, crimpers, etc.).
- Confirm the mounting location in your vehicle is compatible with 2.5-inch tweeters.
4.2 Wiring the Inline Crossovers
The MS25 tweeters include inline 6dB highpass crossovers. These must be connected between your amplifier/head unit and the tweeters to protect the tweeters from low frequencies and ensure optimal sound quality. Connect the input side of the crossover to the audio signal source and the output side to the tweeter terminals.
Figure 2: Individual Memphis Audio MS25 tweeter with mounting bracket.
4.3 Mounting the Tweeters
Utilize the provided direct OEM replacement adapters for a secure fit in compatible vehicle models (GM, Ford, Mercedes, Toyota). Secure the tweeters using the supplied mounting hardware. Ensure a snug fit to prevent vibrations and rattles.
5. Operating Instructions
Once installed, connect your vehicle's battery and turn on your audio system. Start with a low volume and gradually increase it, checking for clear audio output from the tweeters. Adjust your head unit's settings (e.g., treble, balance, fader) to achieve your desired sound profile. The 6dB highpass crossover is pre-configured for optimal tweeter performance.
6. Maintenance
The Memphis Audio MS25 tweeters require minimal maintenance. Keep the speaker grilles free from dust and debris. Avoid exposing the tweeters to excessive moisture or extreme temperatures. Periodically check all connections to ensure they remain secure.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from tweeters | Loose wiring connection; Incorrect crossover wiring; Blown fuse in audio system. | Check all wiring connections; Verify crossover is correctly installed; Inspect and replace any blown fuses. |
| Distorted sound | Volume too high; Improper gain settings on amplifier; Damaged tweeter. | Reduce volume; Adjust amplifier gain settings; Inspect tweeter for physical damage. |
| Weak or inconsistent sound | Poor wiring connection; Incorrect polarity; Insufficient power. | Check and secure all wiring; Ensure correct positive/negative polarity; Verify amplifier output meets tweeter requirements. |
If troubleshooting steps do not resolve the issue, please contact Memphis Audio customer support or a certified installer.
8. Specifications
| Feature | Detail |
|---|---|
| Item Weight | 1.5 pounds |
| Package Dimensions | 18 x 5.5 x 1.5 inches |
| Item Model Number | MS25 |
| Manufacturer | Memphis Audio |
| Cone Material | High-strength carbon fiber |
| Surround Material | Premium rubber |
| Crossover | 6dB Highpass |
| Magnet Type | Neo magnet |
9. Warranty and Support
The Memphis Audio MS25 Tweeters come with a 1-Year Manufacturer Warranty. For warranty claims, technical support, or further assistance, please contact Memphis Audio customer service directly. Keep your proof of purchase for warranty validation.
For more information, visit the Memphis Audio Store.
10. Related Product Videos
Inside the Box
This video provides a quick overview of the contents included in the Memphis Audio MS25 package. It showcases the tweeters, inline crossovers, and other components you will find upon unboxing.
Related documentsMS25
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.