1. Introduction
This manual provides essential information for the safe and effective use of your Wahl Glory Professional Clipper, Model 02211-024. Designed for precision grooming, this cord/cordless clipper features a powerful 6000 RPM rotary motor and a stainless steel taper blade. Its lightweight design and Lithium-Ion battery offer up to 270 minutes of runtime, ensuring freedom and mobility. Key features include a snap-on/snap-off blade, an adjustable taper lever, and a smart LED battery indicator for an enhanced grooming experience.

Image 1.1: The Wahl Glory Professional Clipper, showcasing its sleek black design.
2. What's in the Box
Carefully unpack your Wahl Glory Professional Clipper and ensure all components are present:
- 1 x Wahl Glory Professional Clipper
- 4 x Guide Combs (3 mm, 6 mm, 9 mm, 12 mm)
- 1 x Power Adapter
- 1 x Blade Oil
- 1 x Cleaning Brush

Image 2.1: Contents of the Wahl Glory Professional Clipper package.
3. Setup
3.1 Initial Charging
Before first use, fully charge the clipper. Connect the power adapter to the clipper and plug it into a suitable power outlet. The smart LED indicator will show charging status. A full charge takes approximately 210 minutes and provides up to 270 minutes of cordless runtime.
3.2 Attaching Guide Combs
To attach a guide comb, align the comb with the clipper blade and push it firmly until it clicks into place. Ensure it is securely fastened before use. To remove, gently pull the comb away from the blade.
4. Operating Instructions
4.1 Powering On/Off
Press the power button located on the clipper body to turn the device on or off.
4.2 Adjusting the Taper Lever
The integrated adjustable taper lever allows for precise cutting length adjustments without changing guide combs. Move the lever up for a shorter cut and down for a longer cut. This feature is ideal for blending and fading.

Image 4.1: Key features of the Wahl Glory Professional Clipper, including the adjustable lever.
4.3 Hair Cutting Techniques
For best results, ensure hair is clean and dry. Start with a longer guide comb and gradually switch to shorter lengths if desired. Hold the clipper against the hair, moving it slowly against the direction of hair growth. Use smooth, overlapping strokes for an even cut.

Image 4.2: Demonstrating the Wahl Glory Professional Clipper in action for hair cutting.
Video 4.1: A short demonstration of the Wahl Glory Professional Clipper's operation and features.
5. Maintenance
5.1 Cleaning the Blades
After each use, turn off the clipper and detach the blade. Use the provided cleaning brush to remove any loose hair from the blades and the clipper body. For thorough cleaning, the snap-on/snap-off blade design allows for easy removal and rinsing under water (ensure the clipper body remains dry).

Image 5.1: Detaching the blade for cleaning and maintenance.
5.2 Oiling the Blades
Regular oiling is crucial for maintaining blade sharpness and clipper performance. After cleaning, apply a few drops of the included blade oil to the teeth and sides of the blades. Turn the clipper on for a few seconds to distribute the oil evenly, then wipe off any excess.
6. Troubleshooting
If you encounter issues with your Wahl Glory Professional Clipper, refer to the following common solutions:
- Clipper not turning on: Ensure the clipper is fully charged. If using corded, check the power connection.
- Reduced cutting performance: Clean and oil the blades. Ensure no hair is trapped between the blades. Check if the guide comb is properly attached.
- Clipper feels hot: This can occur during extended use. Allow the clipper to cool down before continuing. Ensure blades are clean and oiled.
- Unusual noise: Clean and oil the blades. If the noise persists, contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 02211-024 |
| Power Source | Battery Powered (Cord/Cordless) |
| Motor Type | 6000 RPM Rotary Motor |
| Blade Material | Stainless Steel |
| Run Time | Up to 270 minutes |
| Charge Time | 210 minutes |
| Cutting Lengths (Combs) | 3 mm, 6 mm, 9 mm, 12 mm |
| Adjustable Taper Lever | Yes |
| LED Indicator | Smart LED |
| Item Weight | 241 g |
| Dimensions (LxWxH) | 45 x 40 x 180 Millimeters |
| Manufacturer | WAHL, WAHL India |
| Country of Origin | China |
8. Warranty and Support
Your Wahl Glory Professional Clipper comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims, technical support, or any product-related inquiries, please contact Wahl India customer service. Keep your purchase receipt as proof of purchase.





