Introduction
Thank you for choosing the REYLAX LED TV Backlight. This product is designed to enhance your viewing experience by synchronizing ambient lighting with your TV screen's colors and sounds. Please read this manual carefully before installation and use to ensure proper operation and longevity of your device.
Figure 1: Overview of REYLAX LED TV Backlight components, including the LED light strip, camera color sensor, remote control, and power adapter.
Safety Information
- Ensure the power supply voltage matches the product's requirements.
- Do not expose the light strip to water or high humidity as it is not water resistant.
- Avoid bending the light strip excessively, especially at the connection points, to prevent damage.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the product. This will void the warranty.
- Unplug the power adapter before cleaning or when not in use for extended periods.
Package Contents
Verify that all items are present in your package:
- LED Light Strip (12.5FT for 55-65 Inch TVs)
- Color Sensor Camera
- LED Controller
- Power Adapter
- Remote Control
- Adhesive Clips (for cable management)
Setup Instructions
Follow these steps for proper installation of your REYLAX LED TV Backlight:
- Step 1: Prepare the TV Surface
Wipe the back of your TV thoroughly to ensure the surface is clean, dry, and free of dust or oil. This is crucial for the adhesive to stick properly. - Step 2: Mount the Color Sensor
Mount the color sensor camera at the top center of your TV. Adjust the telescopic arm of the sensor so that it points downwards and captures the middle area of the TV screen. Secure it with the integrated 3M adhesive sticker.
Figure 2: Adjustable telescopic camera sensor for precise color detection.
- Step 3: Attach the LED Light Strip
Starting from the color sensor, arrange the 5 sections of the light strip around the back perimeter of your TV in the specified order (indicated by arrows or numbers on the strip). Ensure the light strips are located in the correct areas for optimal lighting. Peel off the adhesive backing and firmly press the strip onto the TV surface. Reinforce with the provided clips at intervals, especially at corners.
Figure 3: Recommended light strip placement for 55-65 inch TVs.
- Step 4: Connect Components
Connect the LED light strip and the color sensor to the LED controller. Fix the controller in an appropriate position near the TV using the tapes included in the package. - Step 5: Power On
Connect the power adapter to the LED controller and plug it into a standard wall outlet. The lights should illuminate.
Figure 4: Visual guide for the complete installation process.
App Download and Connection
For advanced control and features, download the uLamp App:
- Scan the QR code provided in the packaging or search for "uLamp" in your device's App Store (iOS) or Google Play Store (Android).
- Alternatively, you can visit the download link: https://cloud.marsgate.com/download/index.html?appId=ilamp_app
- Once installed, open the app and follow the on-screen instructions to connect to your REYLAX LED TV Backlight via Bluetooth.
Figure 5: Download the uLamp App for smart control.
Operating Instructions
Remote Control Functions
The included remote control allows for basic operation of your LED TV backlight:
Figure 6: Remote control layout and functions.
- ON/OFF: Power the lights on or off.
- TV Sync Mode: Activates the color pickup feature, synchronizing lights with screen content.
- Mode +/-: Cycle through various dynamic lighting modes.
- Speed +/-: Adjust the speed of dynamic lighting effects.
- Single Color Buttons: Select static colors (e.g., Red, Green, Blue, White, Yellow, Cyan, Purple).
- Music Mode: Activates sound-reactive lighting modes.
- Timer: Set a timer for the lights to turn off (e.g., 1H, 2H, 3H, 4H).
- Brightness +/-: Adjust the brightness level of the lights.
Smart APP Control (uLamp App)
The uLamp app provides comprehensive control over your REYLAX LED TV Backlight:
Figure 7: Smart APP Control via Bluetooth.
- Color Pickup Sync: The camera sensor detects colors on your TV screen and projects matching ambient light, creating an immersive viewing experience. This feature primarily picks up colors from the middle of the TV screen.
Figure 8: Demonstration of Color Pickup Sync Technology.
- Music Sync: The built-in microphone allows the lights to react to audio, creating dynamic lighting effects that pulse and change with your music.
- Multiple Scene Modes: Choose from a variety of pre-set scene modes designed for different moods or activities (e.g., movie watching, gaming, party).
- Customization: Adjust colors, brightness, saturation, and speed of effects directly from the app.
- Timer Function: Schedule the lights to turn on or off at specific times.
Maintenance
- Cleaning: Ensure the light strip and camera sensor are unplugged from power. Gently wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners or immerse any part in water.
- Storage: If storing the product for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.
- Adhesive: The 3M adhesive is strong, but if re-positioning is necessary, ensure the surface is clean before re-applying.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power connection; loose connections; faulty power adapter. | Check if the power adapter is securely plugged into the outlet and the LED controller. Ensure all connections between the light strip, sensor, and controller are firm. Try a different outlet. |
| Remote control not working. | Battery depleted; remote out of range; IR sensor blocked. | Replace the remote control battery (1 Lithium Metal battery included). Ensure the remote is pointed directly at the LED controller's IR receiver. Reduce distance between remote and controller. |
| Colors do not sync with TV screen. | Camera sensor misaligned or blocked; TV Sync mode not activated. | Ensure the camera sensor is properly positioned at the top center of the TV and its lens is clean and unobstructed. Activate TV Sync mode via the remote or app. Note that the sensor primarily picks up colors from the middle of the screen. |
| Lights flicker or change erratically. | Loose connection; power fluctuation; interference. | Check all cable connections. Ensure the power source is stable. Try unplugging and replugging the power adapter. |
| App cannot connect to the device. | Bluetooth not enabled; device not in pairing mode; app issue. | Ensure Bluetooth is enabled on your smartphone. Restart the app and the LED backlight (by unplugging and replugging). Make sure you are within Bluetooth range. |
Specifications
| Feature | Detail |
|---|---|
| Brand | REYLAX |
| Model Number | 2A595YH-252 |
| Color | Multicolor |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 18 watts |
| Number of Light Sources | 114 |
| Connectivity Technology | Bluetooth |
| Control Method | App, Remote Control |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
| Material | Acrylonitrile Butadiene Styrene, Polycarbonate |
| Item Weight | 10.2 ounces |
| Package Dimensions | 6.73 x 6.5 x 2.2 inches |
| Compatible TV Size | 55-65 Inch |
Warranty Information
REYLAX products are manufactured to high quality standards. This product comes with a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, please refer to the product packaging or contact REYLAX customer support.
Customer Support
If you encounter any issues or have questions regarding your REYLAX LED TV Backlight, please contact our customer support team for assistance. You can typically find contact information on the product packaging or on the official REYLAX website.
For further information and updates, visit the official REYLAX store on Amazon: REYLAX Amazon Store