DEERDANCE 36W 5800 Lumen LED Security Light SC-FDLM2 User Manual

1. Safety Information

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Electrical Installation: This product requires hardwired installation. Installation should be performed by a qualified electrician in accordance with all local electrical codes.
• Power Disconnection: Always disconnect power at the circuit breaker or fuse box before installation, maintenance, or making any adjustments.
• Grounding: Ensure the fixture is properly grounded to avoid potential electric shock.
• Outdoor Use: This fixture is designed for outdoor use and is IP66 waterproof rated. Ensure all connections are sealed to prevent water ingress.
• Heat: The LED light heads can become warm during operation. Do not touch the light heads immediately after they have been on.

2. Product Overview

The DEERDANCE SC-FDLM2 is a 36W 5800 Lumen LED Security Light designed for outdoor use. It features adjustable dual light heads, a motion sensor, and multiple operating modes including Dusk to Dawn. Its aluminum construction ensures durability and efficient heat dissipation.

Key Features:

• High Brightness: 36W power consumption, producing up to 5800 lumens.
• Warm White Light: 3000K color temperature for a comfortable illumination.
• Motion Detection: Superior motion sensor with up to 50 feet adjustable sensing range and 160° detection angle.
• Multiple Modes: ON, Dusk to Dawn (D2D), and Motion Sensor modes.
• Durable Construction: IP66 waterproof and heatproof aluminum design.
• Adjustable Heads: Dual light heads and sensor are adjustable for wide coverage.
• Safety Certified: ETL listed product.

Package Contents:

• 1 x DEERDANCE LED Security Light with Motion Sensor (Model SC-FDLM2)
• Installation Hardware (screws, wire nuts, mounting plate)
• User Manual

Image: Overview of the DEERDANCE LED Security Light, highlighting its dual light heads, 5800 lumen brightness, adjustable detection distance, 160-degree motion detection, IP66 waterproof rating, adjustable heads, and dusk-to-dawn functionality.

3. Setup and Installation

This security light is designed for wall mount, flush mount installation and requires hardwiring to an electrical circuit. Ensure power is disconnected before beginning installation.

Installation Steps:

1. Prepare Wiring: Turn off power at the circuit breaker. Ensure the existing wiring is suitable for the fixture's requirements (120V).
2. Mounting Plate Installation: Secure the mounting plate to the junction box on the wall using the provided screws. Ensure it is firmly attached.
3. Wire Connections: Connect the fixture's wires to your household wiring:
   • Black (Live) to Black (Live)
   • White (Neutral) to White (Neutral)
   • Green/Bare Copper (Ground) to Green/Bare Copper (Ground)
   Use wire nuts to secure connections and ensure they are tight.
4. Fixture Attachment: Carefully align the fixture with the mounting plate and secure it with the provided screws. Ensure no wires are pinched.
5. Adjust Light Heads and Sensor: Adjust the two light heads and the motion sensor to your desired angles for optimal coverage. The light heads can be rotated and tilted.
6. Restore Power: Turn on power at the circuit breaker.

Image: The DEERDANCE LED Security Light installed on the exterior of a modern house, illuminating the surrounding area.

4. Operating Instructions

The DEERDANCE security light offers three operating modes and adjustable sensor settings.

Operating Modes:

• ON Mode: The light will remain continuously on. You can turn it on or off using your wall switch.
• Dusk to Dawn (D2D) Mode: The light automatically turns on at dusk and turns off at dawn. This mode provides continuous illumination during nighttime hours.
• Motion Sensor Mode (Default): The light automatically turns on when the sensor detects motion within its range and turns off after a set duration if no further motion is detected.

Image: Comparison showing the DEERDANCE LED Security Light automatically turning off at dawn and automatically turning on at dusk in Dusk to Dawn mode.

Motion Sensor Adjustable Settings:

The motion sensor features three adjustable dials to customize its behavior. These dials are typically located on the underside of the sensor unit.

Image: Close-up view of the infrared motion sensor with three adjustable dials labeled 1, 2, and 3, indicating settings for duration, ambient light, and mode/distance adjustment.

• Dial 1 (Time): Adjusts the duration of time the light stays on after motion is detected and no further motion is sensed.
• Dial 2 (Lux/Ambient Light): Adjusts the ambient light level at which the light will activate. This determines how dark it needs to be for the motion sensor or D2D mode to function.
• Dial 3 (Sensitivity/Distance): Adjusts the sensitivity of the motion sensor, which controls the detection range (up to 50 feet) and angle (160°).

Image: The DEERDANCE LED Security Light installed above a garage, illustrating its 160-degree detection angle and adjustable 50-foot detection distance for people, animals, and cars.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your DEERDANCE LED Security Light.

• Cleaning: Periodically clean the light heads and motion sensor lens with a soft, damp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents.
• Inspection: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure all mounting screws are tight.
• Weather Resistance: The IP66 rating protects against strong jets of water and dust. However, extreme weather conditions may still require inspection.

Image: The DEERDANCE LED Security Light shown in a rainy environment, emphasizing its IP66 waterproof and heatproof design and die-cast aluminum construction for durability and heat dissipation.

6. Troubleshooting

If you encounter issues with your DEERDANCE LED Security Light, refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

Specific warranty details are not provided in the product information. For warranty inquiries or technical support, please contact DEERDANCE customer service through the retailer where the product was purchased.