1. Introduction
Thank you for purchasing the YANGHOPES 10LED Stage Wash Light Bar. This professional lighting fixture is designed to create dynamic and vibrant effects for various events, including KTV, clubs, discos, weddings, and parties. Featuring 10 RGBW 4-in-1 high-brightness LED beads, it offers versatile color mixing and beam effects. This manual provides essential information for safe installation, operation, and maintenance of your device.
2. Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or serious injury.
- Ensure the power supply voltage matches the product's requirements (AC95V-245V/50Hz).
- Always connect the product to a grounded circuit to avoid electrical shock.
- Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source. The intense light can cause eye damage.
- Keep the device away from rain, moisture, and liquids.
- Ensure adequate ventilation around the fixture to prevent overheating. Do not block ventilation openings.
- Mount the fixture securely using appropriate hardware and ensure it is stable.
- Disconnect from power before cleaning or performing any maintenance.
3. Package Contents
Verify that all components are present upon unpacking:
- 1 x YANGHOPES 10LED Stage Wash Light Bar (Model: 2Mixing Beam Light-0807)
- 1 x Power Cable
- 2 x Mounting Brackets
- Screws for mounting brackets
- 1 x User Manual (this document)
Image: The 10LED Stage Wash Light Bar with its included accessories: power cable, mounting brackets, and user manual.
4. Specifications
| Feature | Detail |
|---|---|
| Operating Voltage | AC95V-245V/50Hz |
| Product Power | 100W (Max 150W) |
| Lamp Beads | 10 x RGBW 4-in-1 LEDs |
| Control Modes | DMX512 (7/13/23/43 channels), Master/Slave, Auto, Sound Activated |
| Dimming Mode | 0-100% Ultra-smooth dimming |
| Operating Temperature | -20°C to 47°C |
| Product Dimensions | 1080mm (L) x 85mm (W) x 170mm (H) |
| Item Weight | 23.5 pounds (approx. 10.66 kg) |
| Beam Angle | 180 Degrees |
| Certifications | CE, FCC |
Image: Technical drawing illustrating the dimensions of the light bar.
5. Setup
5.1 Mounting
The light bar can be installed in various orientations:
- Standing Installation: The unit features four foot pads on the bottom for stable placement on a flat surface.
- Overhead/Truss Mounting: Use the provided mounting brackets to securely attach the fixture to a truss or other suitable overhead structure. Ensure all connections are tight and secure to prevent accidental falls.
Image: Views of the light bar, including its rear panel with connections and mounting bracket attachment points.
5.2 Power Connection
Connect the included power cable to the power input on the rear of the fixture and then to a compatible power outlet. Ensure the power source meets the specified voltage requirements.
5.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port.
6. Operating Instructions
The 10LED Stage Wash Light Bar offers four primary control modes:
6.1 Auto Mode
In Auto mode, the fixture cycles through pre-programmed light shows automatically. This mode is ideal for quick setup and dynamic effects without external control.
Video: Demonstration of the 10LED Stage Wash Light Bar operating in various automatic and DMX-controlled modes, showcasing color changes and beam movements.
6.2 Sound Activated Mode
In Sound Activated mode, the light bar responds to ambient sound and music, creating light patterns that synchronize with the beat. Adjust sensitivity if needed.
Video: A short demonstration of the 10LED Moving Head Bar light, highlighting its dynamic movement and color capabilities, likely in an automatic or sound-activated mode.
6.3 Master/Slave Mode
This mode allows multiple light bars to operate in synchronization without a DMX controller. Connect the DMX OUT of the "Master" unit to the DMX IN of the "Slave" unit. The Master unit controls all connected Slave units, replicating its light show. Ensure all units are set to the correct Master/Slave settings.
Image: Multiple light bars displaying synchronized light beams, demonstrating the Master/Slave capability.
6.4 DMX512 Control
For advanced control, use a DMX512 controller. The fixture supports 7, 13, 23, or 43 DMX channels, allowing precise control over individual LED colors (RGBW), dimming, strobe effects, gradient colors, jump changes, and 180° synchronized head shake. Refer to the DMX channel chart (usually provided separately or on the product display) for specific channel functions.
Image: The light bar showcasing a variety of colorful beam patterns, achievable through DMX control.
Video: A dynamic display of the 10LED Stage Wash Light Bar, demonstrating its RGBW color mixing and strip beam effects, suitable for various stage lighting applications.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your light bar.
- Cleaning: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear, damage, or loose connections.
- Storage: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected, faulty outlet, blown fuse. | Check power connections, try a different outlet, inspect fuse. |
| No DMX control | Incorrect DMX address, faulty DMX cable, missing terminator, incorrect DMX mode. | Verify DMX address and mode settings, check cable connections, ensure terminator is used. |
| Lights not synchronizing in Master/Slave | Incorrect Master/Slave settings, faulty DMX cable between units. | Ensure one unit is set to Master and others to Slave, check DMX cable connections. |
| Overheating | Blocked ventilation, insufficient airflow. | Ensure ventilation openings are clear, provide adequate space around the fixture. |
If the problem persists after attempting these solutions, please contact customer support.
9. Warranty and Support
YANGHOPES is committed to providing quality products and customer satisfaction. For warranty information, technical support, or any questions regarding your 10LED Stage Wash Light Bar, please contact YANGHOPES customer service through the retailer where the product was purchased or visit the official YANGHOPES website.
Contact Information:
- Brand: YANGHOPES
- Website: YANGHOPES Store on Amazon
- Email/Phone: Refer to your purchase documentation or the brand's official website for the most current contact details.