LostCat WF286601AAE
LostCat Twin Over Twin Bunk Bed with Convertible Slide and Ladder Instruction Manual
Model: WF286601AAE
1. Introduction
Thank you for purchasing the LostCat Twin Over Twin Bunk Bed. This manual provides important information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before assembly and retain this manual for future reference.
This bunk bed features a twin top bunk over a twin bottom bunk, a convertible slide, and a ladder. It is constructed from solid pinewood and designed for durability and safety.
2. Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Always use the recommended mattress size for both upper and lower bunks (76''x39.1'').
- The upper bunk is equipped with guardrails to prevent falls. Ensure they are always properly installed and secured.
- The maximum weight capacity for each bed is 400 lbs. Do not exceed this limit.
- Ensure all connections are tight before use. Periodically check and tighten all fasteners.
- The ladder and slide can be installed on either the left or right side. Ensure they are securely attached before use.
- Do not allow children under 6 years of age on the upper bunk.
- Prohibit more than one person on the upper bunk.
- Prohibit horseplay on or under the bed.
- Always use the ladder for entering and leaving the upper bunk.
- Use of a night light may provide added safety for a child using the upper bunk.
- Always use guardrails on both long sides of the upper bunk.
- The use of water or sleep flotation mattresses is prohibited.
- Keep these instructions for future reference.
3. Package Contents
Your LostCat Twin Over Twin Bunk Bed package includes the following components:
- 1 x Twin Bunk Bed Frame (disassembled components)
- All necessary assembly hardware (screws, bolts, etc.)
- Assembly Instruction Guide
Note: This item comes in 2 boxes and may not be delivered at the same time. Please ensure all boxes have arrived before beginning assembly.
4. Setup and Assembly
Assembly is required for this bunk bed. Please follow the detailed assembly instruction guide included in your package. All necessary tools are provided.
- Unpack all components and verify against the parts list in the assembly guide.
- Assemble the bed frame components according to the step-by-step instructions.
- Attach the ladder and slide. These can be set up on either the left or right side of the bunk bed.
- Ensure all bolts and screws are securely tightened before use.

Image: Assembled LostCat Twin Over Twin Bunk Bed with slide and ladder in a child's room setting. The bed is grey with white bedding and colorful accents.

Image: Technical drawing showing the dimensions of the LostCat Twin Over Twin Bunk Bed in inches, including length, width, height, and slide/ladder measurements.
5. Operating Instructions
Using the Bunk Beds
The LostCat Twin Over Twin Bunk Bed provides two sleeping surfaces. The upper bunk is accessed via the integrated ladder, and the lower bunk is easily accessible. Ensure mattresses are properly placed on the slat support system.
Using the Ladder
Always use the sturdy wooden ladder to safely access and exit the upper bunk. Ensure a firm grip on the side rails and step carefully on each rung.
Using the Slide
The integrated slide offers a fun way to descend from the upper bunk. Ensure the area around the slide exit is clear before use. Supervise children during slide use.

Image: LostCat Twin Over Twin Bunk Bed in grey, showcasing the slide and ladder configuration in a room with a patterned rug and toys.
6. Maintenance
- Cleaning: For general cleaning, wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Fastener Checks: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten as necessary to maintain structural integrity and safety.
- Wood Care: The bed is made of pine wood with a lacquered finish. Protect from extreme temperature changes and direct sunlight to prevent warping or fading.
7. Troubleshooting
- Wobbling or Instability: If the bed feels unstable, check all assembly connections. Ensure all bolts and screws are fully tightened.
- Missing Parts: If you find any parts missing upon unboxing, please contact customer support immediately. Refer to the "Support" section for contact details.
- Difficulty with Assembly: Review the assembly instruction guide carefully. If issues persist, contact customer support for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LostCat |
| Model Number | WF286601AAE |
| Size | Twin Over Twin |
| Material | Pine Wood + MDF |
| Color | Grey |
| Overall Product Dimensions | 79.3''L x 84.4''W x 46.5''H |
| Upper Bed Dimension | 76'' x 39.1'' |
| Down Bed Dimension | 76'' x 39.1'' |
| Slide Dimension | 56.8'' x 14.8'' |
| Total Height | 46.5'' |
| Overall Product Weight | 92.5 lbs |
| Bed Weight Capability | 400 lbs (per bed) |
| Recommended Mattress Thickness (Upper/Down) | 6'' / 8-10'' |
| Assembly Required | Yes |
| Special Feature | No Box Spring Needed |
| UPC | 765150892485 |
9. Warranty and Support
For any questions, concerns, or assistance with assembly or parts, please contact LostCat customer support. We aim to reply within 24 hours.
Please refer to your purchase documentation for specific warranty details. Keep your proof of purchase for warranty claims.
You can visit the official LostCat store on Amazon for more information: LostCat Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.