Introduction
Thank you for choosing the Portronics Power Pod 10K Advanced Power Bank. This ultra-compact and portable power bank is designed to provide reliable and high-speed charging for your mobile devices on the go. With its 10,000 mAh capacity and 22.5W max output, it ensures your devices are powered efficiently. Please read this manual carefully to understand the product's features, proper usage, and maintenance.
Product Overview
The Portronics Power Pod 10K is engineered for convenience and performance. Its sleek design incorporates dual output ports and an LED indicator for ease of use.
Image: The Portronics Power Pod 10K Power Bank, compact and easily held in one hand, showcasing its portable design.
Key Features:
- Ultra-Compact Design: Weighing only 180 grams, it's designed for maximum portability.
- High-Speed Charging: Equipped with a 10,000 mAh battery, delivering an impressive 22.5W max output.
- Dual Output Ports: Features a Mach USB-A (22.5W) and a Type-C PD 3.0 (20W) port for simultaneous charging of two devices.
- Type-C Input/Output: The Type-C port also functions as an input for recharging the power bank.
- LED Battery Indicator: Four LED lights indicate the remaining power level and charging status.
- BIS-Certified Safety: Advanced chip protection layers guard against short circuits, high temperatures, and over-voltage issues.
- Wake-Up Button: Activates the power bank to begin charging.
Image: A detailed view of the power bank's top, highlighting the Wake Up Button, LED Indicator lights, Mach USB A (Output) port, and PD Type C (Input/Output) port.
Setup
Initial Charging:
Before first use, it is recommended to fully charge the Portronics Power Pod 10K for approximately 3 hours to ensure optimal battery performance.
- Connect the provided Type-C charging cable to the Type-C PD port on the power bank.
- Connect the other end of the cable to a compatible USB wall adapter (not included) or a computer's USB port.
- The LED indicators will light up progressively, indicating the charging status. All four LEDs will be solid when fully charged.
Operating Instructions
Charging Your Devices:
The Power Pod 10K offers versatile charging for various devices, including smartphones, tablets, earphones, and smartwatches.
- Press the Wake-Up button on the power bank to activate it. The LED indicators will light up.
- Connect your device's charging cable to either the Mach USB-A output port or the Type-C PD output port on the power bank.
- Connect the other end of the cable to your device.
- Your device should begin charging automatically. The power bank's LEDs will indicate its remaining charge.
- To charge two devices simultaneously, use both the USB-A and Type-C output ports.
Image: The Portronics Power Pod 10K connected via cable, actively charging a smartphone, demonstrating its 22.5W fast charging capability.
Recharging the Power Bank:
When the LED indicators show low power, it's time to recharge your Power Pod 10K.
- Use the Type-C PD port for input. Connect the power bank to a power source using a Type-C cable.
- The LEDs will blink to show charging progress and remain solid when fully charged.
Maintenance
Care and Storage:
- Keep the power bank away from extreme temperatures (hot or cold), direct sunlight, and humidity.
- Do not expose the power bank to water or other liquids.
- Clean the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Avoid dropping or subjecting the power bank to strong impacts.
- If storing for an extended period, charge the power bank to about 50% every three months to preserve battery life.
Troubleshooting
If you encounter issues with your Portronics Power Pod 10K, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging devices. | Power bank battery is depleted; cable is faulty; device is incompatible; power bank is not activated. | Recharge the power bank fully. Try a different charging cable. Ensure your device is compatible. Press the Wake-Up button to activate. |
| Power bank not recharging. | Charging cable is faulty; wall adapter is not working; Type-C port is damaged. | Try a different Type-C charging cable. Use a different wall adapter or USB port. Contact customer support if the port appears damaged. |
| Slow charging. | Cable is not fast-charging compatible; device does not support fast charging; multiple devices connected. | Use a high-quality, fast-charging compatible cable. Ensure your device supports fast charging. Disconnect one device if charging two simultaneously. |
| LED indicators not working. | Power bank is completely discharged; internal fault. | Attempt to charge the power bank for an extended period. If still unresponsive, contact customer support. |
Specifications
Detailed technical specifications for the Portronics Power Pod 10K Advanced Power Bank:
| Feature | Detail |
|---|---|
| Model Number | POR-2091 |
| Battery Capacity | 10000 Milliamp Hours (mAh) |
| Max Output | 22.5W |
| USB-A Output | Mach USB-A (22.5W) |
| Type-C Output | PD 3.0 (20W) |
| Type-C Input | Yes |
| Special Features | Dual Output (Type C + USB), LED Indicator Lights, Type C Input, Type C PD Output, Wake Up Button |
| Color | Black |
| Item Weight | 200 g |
| Package Dimensions | 13.8 x 7.1 x 3 cm |
| Included Components | Power Bank 1N, Charging Cable 1N |
| Country of Origin | India |
Warranty Information
Portronics products are manufactured with high-quality standards. For specific warranty terms and conditions applicable to your Power Pod 10K Advanced Power Bank, please refer to the warranty card included in the product packaging or visit the official Portronics website. Keep your purchase receipt as proof of purchase for warranty claims.
Customer Support
Should you require further assistance or have any questions regarding your Portronics Power Pod 10K, please contact our customer support team:
- Email: help@portronics.com
- Phone: +91 9555-245-245
- Manufacturer Address: Portronics Digital Pvt ltd, First Floor Property No D 8 Upper Basement Sector 8 Noida Uttar Pradesh 201301, India
