1. Introduction
Thank you for choosing the Artika Europa Disk 7-inch Integrated LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
The Europa Disk is a discreet and versatile ultra-slim LED ceiling light designed to complement modern, minimalist decors. It provides uniform brightness with integrated LED technology, eliminating the need for traditional bulbs. This fixture features adjustable white technology, allowing you to select color temperatures between 3000K, 4000K, and 5000K, and is compatible with most LED dimmers.
Image: The Artika Europa Disk 7-inch Integrated LED Flush Mount Light, featuring a sleek black circular frame and a diffused white light panel, installed on a ceiling.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK.
- Turn off the main power supply from the circuit breaker before installing or performing any maintenance on the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
- Do not install this fixture in wet locations. It is rated for damp locations.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- Handle the fixture with care. Avoid dropping or subjecting it to strong impacts.
3. Package Contents
Please check that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact Artika customer service.
- 1x Europa Disk 7-inch Integrated LED Flush Mount Light
- 1x Mounting Bracket
- 2x Mounting Screws
- 3x Wire Nuts
- 1x Instruction Manual (this document)
4. Setup and Installation
- Prepare for Installation:
- Turn off the electrical power at the main circuit breaker or fuse box.
- Ensure the power is off before proceeding.
- Gather necessary tools: screwdriver, wire strippers, electrical tape (not included).
- Mounting the Bracket:
- Attach the mounting bracket to the electrical junction box in the ceiling using the provided mounting screws. Ensure the bracket is securely fastened.
- Wiring Connections:
- Connect the black wire from the fixture to the black (live) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box (or to the junction box itself if no ground wire is present) using a wire nut.
- Carefully tuck all wires and wire nuts into the junction box.
- Attaching the Fixture:
- Align the fixture with the mounting bracket.
- Secure the fixture to the mounting bracket using the provided screws, ensuring it sits flush against the ceiling.
5. Operating Instructions
Once the fixture is securely installed and power is restored, you can operate your Artika Europa Disk light.
- Power On/Off: Use your standard wall switch to turn the light fixture on or off.
- Color Temperature Selection (CCT): This fixture features adjustable white technology. To change the color temperature (3000K, 4000K, 5000K), quickly toggle your wall switch OFF and ON within 2 seconds. The light will cycle through the available color temperatures. Once your desired CCT is selected, leave the switch ON. The fixture will remember the last selected CCT when turned off for more than 10 seconds.
- Dimming: This fixture is compatible with most LED dimmers. Install a compatible LED dimmer switch (sold separately) to adjust the light intensity. Follow the dimmer manufacturer's instructions for installation and operation.
6. Maintenance
The Artika Europa Disk LED Flush Mount Light requires minimal maintenance.
- Cleaning: To clean the fixture, ensure the power is turned off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- LED Lifespan: The integrated LED module has a long lifespan of approximately 50,000 hours and is not user-replaceable. If the LED module fails, the entire fixture should be replaced.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims unexpectedly. |
|
|
| Cannot change color temperature. |
|
|
8. Specifications
| Model Number | 7FM-EUDC-BL |
| Brand | Artika |
| Dimensions (L x W x H) | 7 x 7 x 0.6 inches (17.78 x 17.78 x 1.52 cm) |
| Weight | 0.6 lbs (0.28 kg) |
| Light Type | Integrated LED |
| Luminous Flux | 800 Lumens |
| Wattage | 12 Watts |
| Voltage | 120 Volts |
| Color Temperature (CCT) | 3000K - 4000K - 5000K (Selectable) |
| Color Rendering Index (CRI) | 80 |
| Average Life | 50,000 Hours |
| Certification | ETL, Energy Star |
| Location Rating | Damp Location (Indoor) |
| Frame Material | Plastic |
| Lens Material | Plastic |
9. Warranty and Support
Artika products are manufactured to the highest standards and are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Artika website. If you encounter any issues or require technical assistance, please contact Artika customer support.
For customer support, please visit: www.artika.com/support
