1. Product Overview
The Jindaaudio ST288 is a versatile 288 LED party strobe light designed for various lighting applications. It features high-brightness RGB patch lamp beads, multiple control modes including DMX512, remote control, and sound activation, and a bracket for easy mounting. The unit is capable of producing a wide range of colors and dynamic lighting effects.
Image 1.1: Front view of the Jindaaudio 288 LED Party Strobe Light with its remote control.
2. Safety Information
- Ensure the power supply matches the voltage requirements of the device.
- Do not expose the device to rain or moisture.
- Avoid direct eye exposure to the light source, as it can be very bright.
- Ensure proper ventilation to prevent overheating. The unit contains a cooling fan.
- Disconnect power before cleaning or servicing.
3. Setup
3.1 Unpacking
Carefully remove the strobe light and all accessories from the packaging. Verify that all components are present: 288 LED Strobe Light unit, remote control, and power cable.
3.2 Mounting
The strobe light is equipped with an adjustable bracket for versatile mounting options. It can be placed on a flat surface, mounted to a truss, or attached to a wall or ceiling. Ensure the mounting surface or structure can safely support the weight of the unit.
Image 3.1: Dimensions and rear panel showing power and DMX connections.
3.3 Power Connection
Connect the provided power cable to the power input port on the rear of the unit. Plug the other end into a standard electrical outlet (Corded Electric). Ensure the connection is secure to prevent accidental disconnection.
3.4 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the strobe light. If linking multiple units, connect from the DMX OUT of the first unit to the DMX IN of the next, and so on.
4. Operating Instructions
The Jindaaudio 288 LED Party Strobe Light offers multiple operating modes for various effects.
4.1 Remote Control Operation
The included remote control allows for easy adjustment of settings such as color, speed, and mode. Point the remote directly at the front of the strobe light for optimal signal reception. The remote control range is approximately 20 feet.
4.2 Sound Activation Mode
In Sound Activation mode, the light will react to ambient sound and music, creating dynamic effects synchronized with the audio. This mode is ideal for parties and events where music is present.
4.3 DMX512 Control
For professional lighting setups, the unit can be controlled via a DMX512 controller. Refer to your DMX controller's manual for specific programming instructions. The DMX address can typically be set using the display and buttons on the rear of the strobe light.
4.4 Lighting Effects and Colors
The strobe light can display a variety of RGB colors and patterns, including Strobe, Jump, Fade, Pulse, and Chase effects. It can also maintain a static color, functioning as a work light if needed. The lamp beads can change colors and shapes regionally, enhancing visual dynamics.
Image 4.1: Examples of RGB colors and diverse lighting patterns.
Video 4.1: Demonstration of the 288 LED strobe light with DMX and remote control color strobe effects.
5. Maintenance
5.1 Cleaning
To maintain optimal performance and light output, regularly clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
5.2 Fan and Ventilation
The unit features a low-noise fan for heat dissipation. Ensure that the fan vents are not obstructed to allow for proper airflow. Regular checks for dust accumulation in the fan area are recommended to prevent overheating.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, remote issue. | Check power cable connection. Ensure the power outlet is functional. Verify remote control batteries and signal. |
| Fan is excessively loud or rattling. | Fan obstruction or loose mounting. | Ensure vents are clear. If rattling persists, contact support. |
| Remote control not responding. | Out of range, obstructed signal, low battery. | Ensure remote is within 20 feet and pointed at the unit. Remove obstructions. Replace remote batteries if necessary. |
| DMX control not working. | Incorrect DMX address, faulty cable, incompatible master/slave setup. | Verify DMX address settings. Check DMX cable integrity. Ensure DMX master/slave compatibility if linking with other units. |
| Power cable disconnects easily. | Loose power port connection. | Ensure the cable is fully inserted. Avoid applying sideways pressure to the connection. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | ST288 |
| Color | Colorful (remote control) |
| Shape | Rectangular |
| Material | Plastic |
| Finish Type | Painted |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Mounting Type | Bracket Mount |
| Light Source Special Features | Dimmable |
| Color Rendering Index | 85 |
| Number of Light Sources | 1 |
| Batteries Included | No |
| Included Components | Remote control |
| Unit Count | 1.0 Count |
| Item Dimensions (L x W x H) | 8.7" x 6.2" x 2.3" |
8. Warranty and Support
8.1 Manufacturer Warranty
This product comes with a 30-day free return and exchange policy from the manufacturer. Please refer to your purchase documentation for specific terms and conditions.
8.2 Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Jindaaudio customer support through the platform where the product was purchased. Provide your model number (ST288) and purchase details for efficient service.