Important Safety Information
Please read all instructions carefully before assembling and operating your LuxenHome Ceramic Bird Bath Fountain. Keep this manual for future reference.
- Ensure the fountain is placed on a firm, level surface to prevent tipping.
- Only use clean water in the fountain. Do not use chemicals or abrasive cleaners.
- Always unplug the fountain from the power outlet before performing any maintenance, cleaning, or when adding/removing water.
- Do not operate the pump dry. Ensure the water level is always sufficient to cover the pump.
- Keep the power cord away from heat sources, sharp edges, and moving parts.
- This product is designed for outdoor use. Ensure the power outlet is a GFCI (Ground Fault Circuit Interrupter) protected outlet.
- During freezing temperatures, drain all water and store the fountain indoors to prevent damage.
- Keep children and pets away from the fountain during operation and maintenance.
Package Contents
Verify that all components are present before beginning assembly:
- Ceramic Bird Bath Base
- Ceramic Top Bowl with Lotus-shaped Bubbler
- Water Pump with LED Light
- Water Hose/Tubing
- Instruction Manual (this document)
Setup Instructions
-
Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
Image: The LuxenHome 22-inch Ceramic Bird Bath Fountain, fully assembled and operating, showcasing its glazed jade green finish and lotus-shaped bubbler.
- Position the Pump: Place the water pump inside the base of the fountain. Ensure the power cord exits through the designated opening in the base.
-
Connect the Tubing: Attach one end of the water hose/tubing to the outlet of the pump.
Image: A close-up view showing the clear water tubing connected to the pump outlet, positioned within the fountain's ceramic structure.
-
Assemble the Top Bowl: Carefully place the top bowl onto the base, guiding the other end of the water hose through the opening in the top bowl and connecting it to the inlet of the lotus-shaped bubbler. Ensure the top bowl is seated securely and level.
Image: The detachable top bowl of the fountain, showing the internal structure and the connection point for the water hose.
- Fill with Water: Fill the fountain with distilled or clean tap water until the pump is fully submerged. Do not overfill.
- Plug In: Connect the power cord to a GFCI-protected outdoor electrical outlet.
Setup Video Guide
Video: An official LuxenHome video demonstrating the assembly and initial setup of the Aqua Glazed Ceramic Outdoor Waterfall Fountain.
Operating Instructions
-
Initial Start-up: After plugging in, the pump will begin circulating water, and the LED light will illuminate. It may take a few moments for water to flow consistently.
Image: The bird bath fountain positioned in a lush green garden, demonstrating its aesthetic appeal in an outdoor setting.
- Water Level: Regularly check the water level. Due to evaporation and splashing, water levels will decrease over time. Refill as needed to ensure the pump remains submerged. Operating the pump dry can cause damage.
-
Adjusting Water Flow: The pump may have an adjustable flow rate switch. Refer to the pump's specific instructions if you wish to modify the water flow intensity.
Image: A detailed view of the lotus-shaped bubbler with water gently flowing and rippling across the top basin.
- Turning Off: To turn off the fountain, simply unplug it from the power outlet.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your fountain.
- Daily: Check and replenish water levels to keep the pump submerged.
-
Weekly: Clean the fountain basin and pump filter to prevent algae buildup and blockages. Unplug the fountain, remove the top bowl, and clean all surfaces with a soft brush and clean water. Rinse thoroughly.
Image: The top bowl of the fountain detached from the base, illustrating the ease of access for cleaning and maintenance.
- Monthly: For stubborn mineral deposits or algae, use a fountain cleaner specifically designed for ceramic fountains. Follow the product instructions carefully.
- Winterization: Before the first frost, completely drain all water from the fountain. Clean all components thoroughly. Disassemble the pump and store it indoors in a dry, frost-free location. Store the ceramic fountain base and top bowl indoors or cover them securely to protect from freezing temperatures and harsh weather.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not running / Pump not working |
|
|
| Water flow is weak or inconsistent |
|
|
| Water is leaking from the fountain |
|
|
| LED light not working |
|
|
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 12.99" L x 12.99" W x 22.05" H |
| Material | Ceramic |
| Color | Aqua Green |
| Power Source | Corded Electric |
| Special Feature | Built-in LED Light and Pump |
| GTIN (UPC) | 810129481167 |
| Brand | LuxenHöme |
Image: Diagram showing the height (22.05 inches) and diameter (12.99 inches) of the ceramic bird bath fountain.
Warranty and Support
LuxenHome products are manufactured with quality and care. For specific warranty details, please refer to the documentation included with your purchase or contact LuxenHome customer service directly.
If you encounter any issues or require assistance with your product, please contact LuxenHome customer support through their official website or the retailer where the product was purchased. Please have your model number (22" Ceramic Bird Bath Fountain) and GTIN (810129481167) ready when contacting support.
For more information, visit the official LuxenHome store: LuxenHome Store