1. Product Overview
This manual provides instructions for the assembly, operation, and maintenance of your Walker Edison Queen Boho Arched Headboard Solid Wood Bed. This platform bed frame features a distinctive arched headboard and is constructed from solid pine wood, designed to support a queen-size mattress without the need for a box spring.
A complete view of the Walker Edison Queen Boho Arched Headboard Solid Wood Bed, featuring its distinctive arched headboard and platform design, dressed with white bedding and a brown knitted throw, flanked by two matching nightstands.
2. Important Safety Instructions
- Read all instructions carefully before assembly and use.
- Assembly should be performed by two adults to ensure safety and proper construction.
- Ensure all hardware is securely tightened before using the bed. Periodically check and re-tighten hardware as needed.
- Do not exceed the recommended weight capacity of the bed frame. Distribute weight evenly across the mattress.
- Keep small parts and packaging materials away from children.
- Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Arched Headboard
- Side Rails (2)
- Footboard
- Center Support Beam
- Wooden Slats
- Hardware Pack (bolts, washers, nuts, Allen wrench)
4. Setup and Assembly
This bed frame is designed for straightforward assembly, typically completed within 45 minutes with two adults. Follow these steps carefully:
- Unpack all components and lay them out on a clean, soft surface to prevent scratching.
- Attach the side rails to the headboard using the provided hardware. Ensure connections are snug but do not fully tighten yet.
- Attach the footboard to the other end of the side rails, again ensuring snug connections.
- Install the center support beam(s) if included, connecting them to the headboard and footboard or designated support points.
- Place the wooden slats across the side rails. Secure them in place according to the instructions, typically by screwing them into the side rails or using pre-drilled holes.
- Once all components are in place, fully tighten all bolts and screws.
- Carefully move the assembled bed frame to its desired location.
The assembled bed frame without a mattress, showcasing the slatted platform support system and the arched headboard, ready for mattress placement.
A technical diagram illustrating the overall dimensions of the bed frame: 39.25 inches in height, 82.63 inches in length, and 63.5 inches in width.
5. Operating Instructions
This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. Simply place your queen-size mattress onto the wooden slats.
- Ensure your mattress is properly centered on the frame.
- Avoid placing excessive localized weight on any single slat to prevent damage.
- The bed frame is intended for indoor use only.
A detailed view of the sturdy wooden slats that form the platform support, accompanied by text indicating that a box spring is not necessary for this bed frame.
6. Maintenance and Care
- Cleaning: Wipe the bed frame with a dry cloth to remove dust and debris. Avoid using abrasive cleaners or harsh chemicals, as these can damage the wood finish.
- Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent creaking.
- Avoid Moisture: Protect the wood from excessive moisture and direct sunlight to prevent warping or fading.
7. Troubleshooting
- Bed Frame Feels Unstable or Wobbly: Ensure all assembly hardware is fully tightened. Check that the bed frame is on a level surface.
- Creaking Noises: Loose hardware is a common cause of creaking. Re-tighten all bolts and screws. Ensure slats are properly seated and secured.
- Slats or Support Beam Damage: If any wooden components appear cracked or broken, discontinue use immediately to prevent injury. Contact customer support for replacement parts.
8. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | ELIB5CCW |
| Size | Queen |
| Product Dimensions (L x W x H) | 82.63" x 63.5" x 39.25" |
| Item Weight | 70 pounds |
| Material | Solid Pine Wood |
| Color | Cerused White |
| Finish Type | Stained |
| Compatible Mattress Size | Queen |
| Box Spring Required | No |
| Assembly Required | Yes |
| Ground to Item Distance | 7 Inches |
| UPC | 840357731758 |
9. Warranty and Customer Support
Walker Edison offers replacement parts for this product. Please contact Walker Edison within 30 days of delivery for any issues regarding missing or damaged parts.
For further assistance, questions, or to request replacement parts, please contact our customer support team:
- Phone: 1-801-433-3008
- Email: service@walkeredison.com
An image displaying Walker Edison's customer support details: phone number 1-801-433-3008 and email service@walkeredison.com, for assistance with questions or replacement parts.
