Introduction
This manual provides essential information for the safe and efficient operation of your ZOKOP-3 in 1 Portable Evaporative Cooler. Please read it thoroughly before use and retain it for future reference.
The ZOKOP-3 is a versatile 3-in-1 appliance designed for indoor and outdoor use, functioning as a fan, air cooler, and humidifier. It features a large 7.9-gallon water tank, 2353CFM air volume, and convenient scroll casters for easy mobility. It comes with 4 ice packs to enhance cooling performance.
Figure 1: ZOKOP-3 in 1 Portable Evaporative Cooler. This image shows the evaporative cooler in operation, with visible airflow, and includes the four ice packs provided with the unit.
Package Contents
Please check the package contents upon unpacking to ensure all items are present and undamaged:
- 1 x Evaporative Air Cooler Unit
- 4 x Wheels (for assembly)
- 4 x Ice Packs
- 1 x Instruction Manual (this document)
Setup
Follow these steps to set up your evaporative cooler:
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Wheel Installation: Turn the unit upside down. Screw the four wheels into the designated slots on the bottom of the unit. Ensure two of the wheels are locking wheels and are positioned for easy access to lock/unlock.
- Positioning: Place the cooler on a flat, stable surface. Ensure there is adequate space around the unit for proper airflow.
- Filling the Water Tank:
- Locate the water tank. The ZOKOP-3 allows for easy top-fill access.
- Fill the tank with clean water, ensuring the water level does not exceed the "MAX" indicator. The tank capacity is 7.93 gallons.
- For enhanced cooling, place the provided ice packs (after freezing them) into the water tank.
- Power Connection: Plug the power cord into a standard 110V/50Hz electrical outlet.
Operating Instructions
Your ZOKOP-3 Evaporative Cooler features manual controls for easy operation.
Control Panel Overview:
The control panel typically includes knobs or buttons for power, fan speed, mode selection, and oscillation.
Basic Operation:
- Power On/Off: Turn the main power knob or press the power button to switch the unit on or off.
- Fan Speed Adjustment: Select your desired fan speed (High, Medium, Low) using the fan speed control.
- Mode Selection: Choose from available wind modes:
- Natural: Simulates natural breeze patterns.
- Normal: Consistent airflow.
- Sleep: Quieter operation with reduced fan speed for nighttime use.
- Cooling Function (Evaporative Cooling):
- IMPORTANT: Ensure there is enough water in the water tank before activating the cooling function.
- Press the "Cool" button or turn the "Cold" knob to activate the evaporative cooling. The unit will begin to draw water from the tank to cool the air.
- Oscillation: Press the "OSC" button or turn the oscillation knob to enable or disable the automatic 90° horizontal oscillation, which helps distribute cool air evenly. Vertical airflow can be adjusted manually via the shutters.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your evaporative cooler.
- Daily/Weekly:
- Water Tank: Drain and refill the water tank with fresh water regularly to prevent mold and mildew growth.
- Exterior Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Monthly/Seasonally:
- Cooling Pads/Filter: Refer to the specific instructions for cleaning or replacing the cooling pads/filter. Accumulated dust and mineral deposits can reduce efficiency.
- Water Pump: Inspect the water pump for any blockages or debris. Clean if necessary.
- Storage: Before long-term storage, ensure the water tank is completely drained and dry. Clean the unit thoroughly and store it in a cool, dry place, preferably in its original packaging.
Always unplug the unit from the power outlet before performing any cleaning or maintenance.
Troubleshooting
If you encounter issues with your evaporative cooler, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply. | Check if the power cord is securely plugged into a working outlet. Check circuit breaker. |
| No cool air. | Insufficient water in tank; Cooling function not activated; Cooling pads are dry or clogged. | Fill water tank to appropriate level. Activate the "Cool" function. Clean or replace cooling pads. |
| Weak airflow. | Air inlet/outlet blocked; Fan blades dirty. | Ensure nothing is obstructing the air vents. Clean fan blades if accessible and dirty. |
| Unpleasant odor. | Stagnant water or dirty cooling pads. | Drain and clean the water tank thoroughly. Clean or replace cooling pads. Use fresh water. |
| Water leakage. | Water tank overfilled; Unit not level. | Do not overfill the water tank. Ensure the unit is placed on a level surface. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Model | 721 |
| Color | White |
| Material | PP Plastic |
| Product Dimensions (L x W x H) | 17.72 x 13.39 x 32.28 inches (45 x 34 x 82 cm) |
| Product Weight | 16.95 lbs (7.69 kg) |
| Wind Modes | Natural, Normal, Sleep |
| Fan Speed Settings | High, Medium, Low |
| Water Tank Capacity | 7.93 Gallons (30 Liters) |
| Wind Circulation | 2353 CFM |
| Air Flow | 4000 m³/h |
| Coverage Area | 215 ~ 323 Square Feet |
| Voltage | 110V/50Hz |
| Wattage Power | 80W |
| Oscillation | 90° Automatic Horizontal |
| Noise Level | ≤60dB |
| Casters | 4 (2 locking, 2 non-locking) |
Important Safety Information
- Read all instructions before using this appliance.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- Always unplug the unit from the power outlet before moving, cleaning, or performing any maintenance.
- Do not use outdoors if there is a risk of exposure to direct sun or rain. While suitable for semi-outdoor use, protect from harsh weather conditions.
- Ensure the water tank has sufficient water before pressing the cooling key to avoid damage to the pump.
- Do not allow children to operate or play with the evaporative cooler.
- Do not insert fingers or foreign objects into the air inlets or outlets.
- Use only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
