1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector for the Autophix BT300 Pro. This screen protector is designed to offer superior protection and enhanced screen visibility.
This image displays the BoxWave screen protector packaging alongside the Autophix BT300 Pro device, illustrating the product's compatibility.
2. Package Contents
Verify that all items are present in your package:
- Two (2) BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protectors
- One (1) Cleaning Cloth
- One (1) Dust Removal Sticker
- One (1) Squeegee Card
The package contents include two ClearTouch Anti-Glare ToughShield 9H screen protectors and essential installation accessories like a cleaning cloth.
3. Installation Instructions
Follow these steps carefully for optimal screen protector application:
- Preparation: Ensure your Autophix BT300 Pro device is powered off. Work in a clean, dust-free environment with good lighting.
- Clean the Screen: Use the provided cleaning cloth to thoroughly wipe the device screen, removing all smudges, fingerprints, and dust. For stubborn marks, a screen cleaner (not included) can be used sparingly.
- Remove Dust: Use the dust removal sticker to dab the screen surface, lifting any remaining dust particles. Inspect the screen closely for any specks of dust.
- Align the Protector: Carefully peel back a small portion of the protective film from the screen protector (usually marked '1' or 'back'). Align the exposed edge of the screen protector with one edge of your device screen, ensuring precise placement over the display area and any cutouts.
- Apply the Protector: Slowly peel off the rest of the protective film while simultaneously lowering the screen protector onto the device screen. Use the squeegee card to gently push out any air bubbles from the center outwards as you apply.
- Remove Top Film: Once the screen protector is fully applied, carefully peel off the top protective film (usually marked '2' or 'front').
- Final Touches: Use the cleaning cloth to gently wipe the newly installed screen protector. Minor bubbles may disappear over 24-48 hours.
Important: The Autophix BT300 Pro device is not included with this screen protector. This product is designed specifically for the device's screen dimensions.
4. Operating Characteristics
Once installed, your BoxWave ClearTouch Anti-Glare ToughShield 9H Screen Protector provides several benefits:
- Anti-Glare Surface: The matte finish disperses light, significantly reducing reflections and glare from ambient light sources, improving screen readability in various conditions.
- Touch Sensitivity: The protector maintains the original touch sensitivity of your device screen, ensuring smooth and accurate interaction.
- Scratch Resistance: With a 9H hardness rating, the flexible film offers robust protection against scratches, scuffs, and minor impacts.
- Fingerprint Resistance: The matte surface helps repel fingerprints and smudges, keeping your screen cleaner.
A visual comparison showing how the ClearTouch Anti-Glare surface reduces distracting reflections, enhancing screen readability in various lighting conditions.
5. Maintenance
To ensure the longevity and clarity of your screen protector:
- Cleaning: Use a soft, lint-free cloth (like the one provided) to gently wipe the screen protector. For deeper cleaning, slightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While the protector is scratch-resistant, extreme pressure or very sharp objects can still cause damage.
6. Troubleshooting
Common issues and their solutions:
- Bubbles: Most small bubbles will dissipate within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and reapply, using the squeegee card to push the air out.
- Dust Particles Underneath: If dust is trapped, carefully lift the nearest edge of the protector and use a dust removal sticker or a piece of tape to gently lift the dust particle from the screen or the adhesive side of the protector. Reapply slowly.
- Misalignment: If the protector is significantly misaligned, carefully peel it off entirely, clean the screen again, and attempt reapplication. The ClearTouch protector is designed to be reusable if removed carefully.
7. Specifications
| Feature | Description |
|---|---|
| Product Name | ClearTouch Anti-Glare ToughShield 9H |
| Compatibility | Autophix BT300 Pro |
| Hardness Rating | 9H (as strong as glass, flexible) |
| Surface Type | Matte, Anti-Glare, Anti-Smudge |
| Material | Flexible Film |
| Quantity | 2-Pack |
An infographic detailing key features: 9H hardness for durability, an anti-glare surface for improved visibility, the inclusion of two screen protectors, and precise manufacturing for a perfect fit.
This image demonstrates the screen protector's ultimate flexibility and shatterproof nature, highlighting its robust protection against impacts.
This image emphasizes the precise design and manufacturing process, ensuring the screen protector perfectly fits the specific dimensions of your device.
8. Warranty and Support
BoxWave products are designed for quality and performance. For any questions, concerns, or support needs regarding your ClearTouch Anti-Glare ToughShield 9H Screen Protector, please contact BoxWave customer service. Refer to your product packaging or the BoxWave website for specific warranty information and contact details.
