Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your LIGE Men's Chronograph Watch. Please read this guide thoroughly to ensure proper use and longevity of your timepiece.

Image: Front view of the LIGE Men's Chronograph Watch, featuring a blue dial, rose gold case, and a brown leather strap.
Setup and Time Adjustment
Before using your watch, ensure the time and date are correctly set.
Setting the Time and Date
- Pull the Crown: Gently pull the crown (middle button on the right side) out to position 2.
- Adjust the Date: Rotate the crown clockwise or counter-clockwise to set the desired date.
- Pull the Crown Further: Pull the crown out to position 3. The second hand will stop.
- Set the Time: Rotate the crown to set the hour and minute hands. Ensure you account for AM/PM if the watch has a 24-hour indicator.
- Push the Crown Back: Once the time is set, push the crown back into position 1 to start the watch.
Chronograph Button Functions
- Top Button: Press to Start/Pause the chronograph function.
- Bottom Button: Press to Reset the chronograph to zero.

Image: Diagram illustrating the watch's functional overview, showing the Start/Pause button, Reset button, and crown positions for adjusting calendar and time. It also highlights the minute, 24-hour/sun & moon, second, and calendar sub-dials.
Operating the Chronograph and Features
Chronograph Sub-dials
- Minute Sub-dial: Tracks elapsed minutes during chronograph operation.
- 24 Hour / Sun & Moon Sub-dial: Indicates 24-hour time and visually represents day/night.
- Second Sub-dial: Displays continuous seconds for the main timekeeping.
- Calendar Sub-dial: Shows the current date.
Luminous Display
The watch dial and hands are coated with a luminous material. After exposure to light, this coating will emit a glow in dark conditions, allowing for visibility in low-light environments.

Image: The LIGE watch dial in a dark setting, showcasing its luminous hands and markers glowing brightly for enhanced visibility.
Maintenance and Care
Water Resistance
This watch features 30 meters (3 ATM) water resistance. This rating means the watch is suitable for daily use and can withstand splashes, rain, and brief immersion in water, such as during handwashing. It is not suitable for swimming, diving, or showering with hot water.
- Handwash: Yes
- Rain: Yes
- Splash: Yes
- Swimming/Diving: No

Image: The LIGE watch positioned near water splashes, with icons indicating its suitability for handwashing, rain, and splashes, confirming its 30M water resistance.
General Care
- Clean the watch regularly with a soft, dry cloth to remove dust and dirt.
- Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
- Keep the watch away from chemicals, solvents, and detergents, as these can damage the case, strap, or seals.
- If the leather strap gets wet, allow it to air dry naturally, away from direct heat.
Troubleshooting
If you encounter any issues with your watch, please refer to the following common troubleshooting tips:
- Watch Not Running: Ensure the crown is fully pushed in (position 1). If the watch still does not run, the battery may need replacement. Contact customer support for assistance.
- Incorrect Time/Date: Refer to the "Setting the Time and Date" section to re-adjust.
- Chronograph Not Resetting: If the chronograph hands do not reset to zero, try pressing the reset button firmly. If the issue persists, it may require professional inspection.
- Condensation Inside Dial: This can indicate a breach in water resistance. Avoid further contact with water and seek professional service immediately.
Specifications
Detailed technical specifications for your LIGE Men's Chronograph Watch.

Image: A diagram detailing the product parameters, including watch dimensions (42mm diameter, 20mm band width, 240mm strap length, 11mm case thickness) and a table of specifications.
| Specification | Detail |
|---|---|
| Model Number | LG89107-BRN-RG-BLU |
| Movement Type | Quartz |
| Case Material | Alloy |
| Case Diameter | 44 Millimetres |
| Case Thickness | 14 Millimetres |
| Band Material Type | Leather |
| Band Colour | Brown |
| Water Resistance | 30 M (3 Bar) |
| Functions | Chronograph Seconds / Minutes, Day / Date / 24 hr. |
| Item Weight | 110 g |
| Dial Window Material | Mineral Glass |
Warranty and Support
Warranty Information
Each LIGE watch product includes a 1-year warranty covering manufacturing defects. This warranty ensures that your watch is free from defects in materials and workmanship under normal use.
Customer Support
For any questions regarding your product, warranty claims, or technical assistance, please contact the manufacturer:
- Manufacturer: Vian International
- Location: Delhi, India
- Customer Care: 9315666060
Please have your model number (LG89107-BRN-RG-BLU) and purchase details ready when contacting support.





