amazon basics AB-T10LR
amazon basics TWS in-Ear Earbuds (AB-T10) User Manual
Model: AB-T10LR
Introduction
This manual provides detailed instructions for the safe and efficient use of your amazon basics TWS in-Ear Earbuds (AB-T10). Please read this manual thoroughly before using the product and retain it for future reference.
Package Contents
- Earphones
- Charging case
- Extra Pair of Eartips
- Charging cable
- User Manual
Setup and First Use
Charging the Earbuds and Case
Before first use, fully charge the earbuds and the charging case. Connect the provided charging cable to the charging case and a USB power source. The indicator lights on the case will show charging status.
The earbuds offer fast charging: 10 minutes of charge provides approximately 125 minutes of playtime.
Image: amazon basics TWS in-Ear Earbuds (AB-T10) in their charging case, illustrating the product design.
Image: Visual representation of the earbuds and charging case, highlighting the impressive 50 hours of total playtime and the fast charging capability (10 minutes charge for 125 minutes playtime).
Pairing with a Device
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode (Instant Wireless Pairing - IWP).
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "AB-T10" or "amazon basics TWS" in the list of available Bluetooth devices.
- Select the earbuds to connect. A voice prompt will confirm successful pairing.
The earbuds utilize Bluetooth 5.3 for a stable and seamless connection, supporting HSP, HFP, A2DP, and AVRCP profiles.
Image: A person wearing one of the earbuds, demonstrating its in-ear fit and highlighting the Bluetooth v5.3 connectivity and Quad Mics Technology with Environmental Noise Cancellation (ENC).
Operating Instructions
Touch Controls
The earbuds feature smart touch controls for easy management of music and calls.
- Single Tap: Play/Pause music, Answer/End calls.
- Double Tap: Skip tracks (Next/Previous, depending on earbud).
- Hold Finger in Place: Adjust volume (Volume Up/Down, depending on earbud).
Image: A detailed view of an earbud, illustrating the smart touch control area with icons for single tap (play/pause), double tap (volume up/down), and triple tap (next/previous song). It also highlights the 10mm dual drivers for enhanced sound.
Wearing the Earbuds
Select the appropriate eartip size for a comfortable and secure fit. Gently insert the earbuds into your ear canal and twist slightly to ensure a snug fit.
Image: A woman wearing an amazon basics TWS earbud, demonstrating the comfortable and discreet fit of the product.
Maintenance and Care
Cleaning
Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the charging contacts are free of dust and debris.
Water Resistance
The earbuds are IPX4 water-resistant, meaning they are protected against splashing water from any direction. They are suitable for workouts and light rain but should not be submerged in water.
Image: The earbuds shown with water droplets, visually representing their IPX4 water-resistant and sweat-proof capabilities.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing. | Earbuds out of charge, Bluetooth off on device, too far from device. | Charge earbuds and case. Ensure Bluetooth is enabled on your device. Move earbuds closer to the device. Try re-pairing. |
| No sound from earbuds. | Volume too low, not connected, media paused. | Increase volume on both earbuds and device. Check Bluetooth connection. Ensure media is playing. |
| One earbud not working. | Low battery, connection issue. | Place both earbuds back in the case, close, then reopen. Ensure both are charged. Re-pair if necessary. |
| Poor sound quality. | Improper fit, interference, low battery. | Adjust eartips for a secure fit. Move away from sources of interference. Charge earbuds. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | TWS (AB-T10LR) |
| Connectivity Technology | Wireless (Bluetooth 5.3) |
| Audio Driver Type | 10mm Dual Dynamic Drivers |
| Battery Life (Total) | Up to 50 Hours (with charging case) |
| Fast Charging | 10 minutes charge for 125 minutes playtime |
| Water Resistance | IPX4 (Water Resistant) |
| Control Type | Touch Control |
| Item Weight | 42 Grams |
| Product Dimensions | 6.5 x 5.5 x 1 cm |
| Manufacturer | DONGGUAN ARCHER TECHNOLOGY CO., LTD |
| Country of Origin | China |
Warranty Information
The amazon basics TWS in-Ear Earbuds (AB-T10) come with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the official amazon basics website or contact customer support.
Customer Support
For any questions, technical assistance, or warranty claims, please contact amazon basics customer support. You can find contact information on the official amazon basics website or through your purchase platform.
Online Support: Visit the amazon basics Store for FAQs and support resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.