EUGAD 0010CY-6
EUGAD Swivel Dining Chairs Instruction Manual
Model: 0010CY-6
Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your EUGAD Swivel Dining Chairs. Please read this manual carefully before assembly and retain it for future reference.
Safety Information
Always follow these safety guidelines to prevent injury or damage to the product:
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the threads.
- Keep small parts away from children.
- Do not stand on the chair.
- Maximum weight capacity: 150 kg (330 lbs). Do not exceed this limit.
Package Contents
Verify that all components are included in your package:
| Part | Description | Quantity |
|---|---|---|
| A | Chair Seat with Backrest | 6 |
| B | Metal Leg Frame | 6 |
| C | Swivel Mechanism | 6 |
| D | Screws (M6x25mm) | 24 (4 per chair) |
| E | Allen Key | 1 |
Setup and Assembly
Follow these steps to assemble your EUGAD Swivel Dining Chairs:
Step 1: Attach Swivel Mechanism to Seat
Place the chair seat (Part A) upside down on a soft, clean surface. Align the swivel mechanism (Part C) with the pre-drilled holes on the underside of the seat. Secure it using four M6x25mm screws (Part D) and the Allen key (Part E). Do not fully tighten yet.
Image: Underside of the chair seat showing the attachment points for the swivel mechanism. The swivel mechanism is a circular metal plate.
Step 2: Attach Metal Leg Frame to Swivel Mechanism
Align the metal leg frame (Part B) with the holes on the swivel mechanism (Part C). Ensure the legs are oriented correctly. Secure it using the remaining four M6x25mm screws (Part D) and the Allen key (Part E). Now, fully tighten all screws from both Step 1 and Step 2.
Image: A fully assembled chair, viewed from the side, showing the metal leg frame securely attached to the seat.
Step 3: Verify Stability
Once assembled, gently shake the chair to ensure all connections are secure and the chair is stable. If any wobbling occurs, re-tighten the screws.
Image: A close-up of the chair highlighting its stable metal legs and the smooth 360-degree swivel function, indicated by an arrow.
Operating Instructions
Your EUGAD Swivel Dining Chairs are designed for comfortable and versatile use.
360° Swivel Function
The chair features a smooth 360-degree swivel mechanism, allowing you to rotate freely without moving the entire chair. This is ideal for conversations, accessing different areas around a table, or adjusting your position for comfort.
Image: A chair positioned next to a table, with an arrow indicating its 360-degree swivel capability.
Ergonomic Design
The curved backrest and armrests, combined with the soft velvet upholstery and high-density foam padding, provide ergonomic support and comfort for extended periods of sitting.
Image: A close-up view of the chair's seat and backrest, emphasizing the soft velvet fabric and thick padding for comfort.
Maintenance and Care
Proper care will extend the life and appearance of your chairs:
- Cleaning: For general cleaning, wipe the velvet upholstery with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, a mild fabric cleaner designed for velvet can be used, following the product's instructions.
- Metal Legs: Wipe metal legs with a dry or slightly damp cloth. Avoid abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause the fabric color to fade.
- Weight Limit: Do not exceed the maximum weight capacity of 150 kg (330 lbs).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Screws are not fully tightened. | Ensure all screws connecting the seat, swivel mechanism, and leg frame are fully tightened using the Allen key. |
| Swivel mechanism is stiff or noisy. | Lack of lubrication or debris. | Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing the rotation. |
| Fabric appears creased. | Packaging or storage. | Light creases usually disappear with use. Gentle steaming from a distance may help, but test on an inconspicuous area first. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EUGAD |
| Model Number | 0010CY-6 |
| Color | Ivory |
| Material | Velvet, Sponge, Metal |
| Overall Dimensions (L x W x H) | 63 x 54.5 x 87 cm (24.8 x 21.5 x 34.3 inches) |
| Seat Dimensions (W x D) | 39 x 43.5 cm (15.4 x 17.1 inches) |
| Seat Height | 48 cm (18.9 inches) |
| Backrest Height | 43.5 cm (17.1 inches) |
| Item Weight (per chair) | Approx. 7.95 kg (17.5 lbs) (47.7 kg for 6 chairs) |
| Maximum Load Capacity | 150 kg (330 lbs) |
| Special Features | 360° Swivel, Ergonomic Design |
Image: A technical drawing of the chair with key dimensions labeled in centimeters, including overall height, width, depth, seat height, and backrest height.
Warranty and Support
For warranty information or technical support, please contact EUGAD customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can also visit the official EUGAD store on Amazon: EUGAD Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.