Introduction
Welcome to your new SOFTSEA Wooden Nightstand. This manual provides essential information for assembly, operation, and maintenance to ensure safe and proper use of your furniture.
This image shows the SOFTSEA Wooden Nightstand from a front perspective, highlighting its three drawers and overall design.
Safety Information
- Always follow assembly instructions carefully.
- Do not overload drawers. Each drawer has a weight capacity of 30 lbs. The total weight capacity for the nightstand is 150 lbs.
- Place the nightstand on a level surface to prevent tipping.
- Keep small parts away from children during assembly.
- Regularly check all connections to ensure they remain tight.
Package Contents
Before assembly, verify that all components are present.
- Nightstand Body (pre-assembled)
- Legs (4 pieces)
- Hardware Pack (screws for legs)
- Instruction Sheet
This image displays the SOFTSEA Wooden Nightstand from various angles, illustrating its design and features.
Setup and Assembly
Your SOFTSEA Nightstand requires minimal assembly.
- Carefully unpack all components and place them on a soft, clean surface to prevent scratches.
- Locate the four legs and the hardware pack.
- Turn the nightstand body upside down.
- Attach each leg to the designated corner using the provided screws. Ensure they are securely tightened.
- Gently turn the nightstand upright.
Assembly is now complete.
This image provides a close-up view of the nightstand's leg and drawer handle, showing the design details.
Operating Instructions
Your nightstand features three drawers and a pull-out tray for convenient storage.
Using the Drawers
The nightstand is equipped with three smooth-gliding drawers. To open, gently pull the handle. To close, push the drawer firmly until it is fully seated.
This image shows the nightstand with its bottom drawer partially open, demonstrating the drawer mechanism.
Using the Pull-Out Tray
A discreet pull-out tray is located above the top drawer. This tray can be extended to provide additional surface area for items like drinks, books, or remote controls.
Note: The pull-out tray has a weight capacity of 40 lbs. Do not exceed this limit.
This image illustrates the nightstand with its pull-out tray extended, showing its functionality and the indicated weight capacity.
Maintenance
To maintain the appearance and longevity of your nightstand:
- Wipe surfaces with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Protect the surface from direct sunlight and extreme temperature changes.
- Immediately wipe up any spills to prevent staining.
Troubleshooting
Wobbly Nightstand
If the nightstand feels wobbly, check that all leg screws are securely tightened. Ensure it is placed on a flat, even surface.
Sticking Drawers
If a drawer is difficult to open or close, check for any obstructions within the drawer glides. Ensure the drawer is properly aligned on its tracks.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Nightstand |
| Model | B0CX8CYX8F |
| Brand | SOFTSEA |
| Overall Dimensions (D x W x H) | 28"D x 16.9"W x 28.1"H |
| Overall Weight | 47 lbs |
| Total Weight Capacity | 150 lbs |
| Each Drawer Weight Capacity | 30 lbs |
| Pull-Out Tray Weight Capacity | 40 lbs |
| Frame Material | MDF + Pine Solid Wood |
| Legs Material | Rubber Wood |
| Handle Material | Iron |
| Number of Drawers | 3 |
| Drawer Glide Mechanism | Ball Slide Bar |
| Finished Back | Yes |
| Integrated Wireless Charging Surface | No |
| Country of Origin | Vietnam |
This diagram illustrates the key dimensions of the SOFTSEA Wooden Nightstand, including height, width, and depth.
Warranty and Support
For any questions regarding assembly, missing parts, or product issues, please contact SOFTSEA customer support. Refer to your purchase documentation for specific warranty details.
You can visit the official SOFTSEA store on Amazon for more information: SOFTSEA Store.