YOEYOU Red Light Therapy Face Mask (Model FM-02) User Manual

1. Introduction

The YOEYOU Red Light Therapy Face Mask (Model FM-02) is a portable, rechargeable skincare device designed for facial rejuvenation. It utilizes a combination of four light wavelengths, including 850nm Near Infrared, to address various skin concerns. This manual provides essential information for the safe and effective use of your device.

2. Safety Information

Please read all instructions before using the device. Keep this manual for future reference.

• Eye Protection: Always use the provided eye protection during treatment to shield your eyes from direct light exposure.
• Skin Sensitivity: Perform a photosensitivity test before initial use. Apply the mask to a small, inconspicuous area of skin for a short duration to check for any adverse reactions.
• Medical Conditions: Consult a healthcare professional before use if you have any pre-existing medical conditions, are pregnant, or are taking photosensitizing medications.
• Charging: Do not use the LED mask while it is charging. Ensure the remote control is fully charged before use.
• Cleaning: Clean the device regularly as instructed in the Maintenance section.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

3. Package Contents

Verify that all items are present and in good condition upon opening the package.

Image: Visual representation of the items included in the YOEYOU LED Face Mask package.

• Silicone LED Mask
• Controller
• Adjustable Straps
• Blackout Eye Mask
• USB Charging Cable
• User Manual
• After-sales Service Card
• Storage Bag
• Packaging Box

4. Product Features

The YOEYOU LED Face Mask incorporates advanced technology for effective skincare.

• Multi-Wavelength Light Therapy: Features 4 types of light waves (450nm-850nm), including Red Light (660nm) and Near-Infrared (850nm), Blue Light (460nm), and a combination of Blue, Red, and Near-Infrared.
• Enhanced Intensity: Utilizes upgraded 3-in-1 chip technology with 216 intense beams of light for deeper skin penetration and improved energy efficiency.
• Adjustable Intensity Levels: Offers 3 levels of adjustable light intensity.
• Flexible and Comfortable Design: Made from soft, skin-friendly silicone with adjustable straps for a comfortable and secure fit. Includes eye protection.
• Portable and Rechargeable: Foldable design and USB rechargeable controller allow for convenient use at home or while traveling.
• Smart Timing Function: Built-in timer with settings for 5, 10, 15, or 20 minutes.

Image: Illustration of the mask's core technologies: 3-in-1 chip, intensive lighting, and powerful energy wavelengths.

Image: Features of the mask including soft silicone, adjustable straps, blackout eye mask, and 3 core LED lamps.

5. Setup

Follow these steps to prepare your YOEYOU LED Face Mask for use:

1. Charge the Controller: Fully charge the remote control using the provided USB charging cable. The controller's battery indicator will show charging status.
2. Attach Straps: Securely attach the adjustable straps to the mask for a comfortable fit around your head.
3. Connect Mask to Controller: Plug the USB cable from the mask into the designated port on the remote control.
4. Prepare Skin: Cleanse and dry your face thoroughly before applying the mask.

Video: Official demonstration of the YOEYOU LED Face Mask usage steps, including connecting the controller, selecting light modes, and adjusting settings.

6. Operating Instructions

Operate your device using the remote control:

1. Power On: Press and hold the power button on the controller to turn on the device.
2. Select Mode: Use the mode selection button to cycle through the available light therapy modes (Red, Blue, Red + Infrared, Blue + Red + Near Infrared).
3. Adjust Intensity: Press the intensity adjustment button to select one of the 3 intensity levels.
4. Set Timer: Use the timer button to set the desired treatment duration (5, 10, 15, or 20 minutes).
5. Apply Mask: Place the mask on your face, ensuring the blackout eye mask is properly positioned for eye protection. Adjust the straps for a comfortable fit.
6. Begin Treatment: Relax and enjoy your light therapy session. The device will automatically turn off after the set time.

Image: Overview of the controller with buttons for selecting light therapy modes and setting the timer.

7. Light Therapy Modes

The mask offers four distinct light therapy modes, each targeting specific skin concerns:

• Red Light (660nm): Designed to repair skin, promote collagen regeneration, and reduce wrinkles.
• Blue Light (460nm): Aims to brighten skin tone and address oil control.
• Red + Infrared Light (660nm + 850nm): This combination is optimal for reducing wrinkles and improving skin elasticity.
• Blue + Red + Near Infrared Light (450nm + 660nm + 850nm): Targets fading acne marks and improving overall skin condition.

Image: Visual guide to the four available light therapy modes and their primary benefits.

8. Usage Recommendations

For best results, it is recommended to use the mask 3-5 times a week for 10-20 minutes each time. Consistency is key for visible improvements in skin condition.

Image: Step-by-step guide on how to integrate the LED mask into your skincare routine.

9. Maintenance and Care

To ensure the longevity and hygiene of your device:

• Cleaning: After each use, gently wipe the mask with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the mask in its storage bag in a clean, dry place to protect it from dust and damage.
• Avoid Water Immersion: Do not immerse the mask or controller in water.

10. Troubleshooting

If you encounter any issues with your device, please refer to the following common solutions:

• Device Not Turning On: Ensure the controller is fully charged and properly connected to the mask via the USB cable.
• Lights Not Activating: Check the connection between the mask and the controller. Make sure the power button has been pressed and held until the device activates.
• Controller Battery Indicator Flashing: This indicates a low battery. Charge the controller immediately.
• Discomfort During Use: Adjust the straps for a more comfortable fit. Ensure the blackout eye mask is correctly positioned.

If problems persist, please contact customer support.

Image: Key notes and tips for proper operation and care of the LED mask.

11. Specifications

12. Warranty and Support

The YOEYOU LED Face Mask comes with a 365-day warranty. For any questions, concerns, or support needs, please contact YOEYOU customer service. We are committed to providing 24/7 customer service and a visible beauty experience.