Important Information
ATTENTION: This remote control is NOT programmable by individuals. Only the condominium administrator or property manager can activate these transmitters. Please confirm with your administrator before purchasing.
Image illustrating the critical requirement for professional programming. The text states: "Functions only if programmed by your syndic. Important Information - INTRATONE Products. Before ordering an INTRATONE product (badge, remote control), it is important to contact your syndic or co-ownership manager. Why? Intratone products must be programmed remotely by the syndic of your residence. Without this programming, the product will not be able to function."
Product Overview
The INTRATONE 09-0101 is a 2-channel remote control designed for access control systems, utilizing Mifare technology and operating at a frequency of 868 MHz. This set includes two remote controls and one DOMOBIP keychain.
Image: A pair of INTRATONE 09-0101 remote controls. Each remote is black, featuring two grey control buttons and a key ring loop at the bottom.
Image: The included DOMOBIP keychain, white with a blue circular token and a metal key ring.
Setup
The INTRATONE 09-0101 remote control requires professional programming by a qualified administrator (e.g., condominium syndic or property manager). Individual users cannot program this device.
- Contact Administrator: Before attempting to use the remote, contact your building's administrator or property manager.
- Provide Remote Details: Inform the administrator about your new INTRATONE 09-0101 remote control.
- Administrator Programming: The administrator will remotely program the remote control to function with your building's access system. This process typically involves registering the remote's unique identifier with the central system.
- Verification: Once programmed, verify with the administrator that the remote is active and ready for use.
Note: Attempting to program the remote without administrator access will not be successful and may prevent its proper function.
Operating Instructions
Once the INTRATONE 09-0101 remote control has been successfully programmed by your administrator, it is ready for use.
- Activation: Point the remote control towards the receiver of the access system (e.g., gate, door, barrier).
- Button Function: Press one of the two grey buttons on the remote control. Each button corresponds to a specific channel or function as configured by your administrator.
- Confirmation: The access system should respond (e.g., gate opens, door unlocks). If no response, ensure you are within range and the remote is correctly programmed.
Image: Close-up view of the INTRATONE remote control, highlighting the two grey operational buttons.
Maintenance
To ensure the longevity and proper functioning of your INTRATONE 09-0101 remote control, follow these maintenance guidelines:
- Cleaning: Wipe the remote control with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing or internal components.
- Battery Replacement: The remote control uses a standard coin cell battery. When the range decreases or the remote stops responding, the battery may need replacement. Consult your administrator or a qualified technician for battery replacement, as improper handling may damage the device or void any warranty.
- Storage: Store the remote control in a dry place, away from extreme temperatures, direct sunlight, and high humidity.
- Physical Protection: Avoid dropping the remote control or subjecting it to strong impacts, which can damage its internal circuitry.
Image: Side profile of the INTRATONE remote control, illustrating its compact design.
Troubleshooting
If you encounter issues with your INTRATONE 09-0101 remote control, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working / No response from access system. |
|
|
| Reduced operating range. |
|
|
If these steps do not resolve the issue, please contact your building's administrator or INTRATONE support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | INTRATONE |
| Model Number | 09-0101 |
| Number of Channels | 2 |
| Technology | Mifare |
| Frequency | 868 MHz |
| Color | Black |
| Product Dimensions | 7 x 4 x 1 cm |
| Product Weight | 24 g |
| Included Components | 2 remote controls, 1 DOMOBIP keychain |
Warranty Information
Specific warranty details for the INTRATONE 09-0101 remote control are not provided in the product description. Please refer to your purchase documentation or contact your supplier or the INTRATONE manufacturer directly for warranty terms and conditions.
Support
For technical support, programming assistance, or any questions regarding the INTRATONE 09-0101 remote control, please contact your building's administrator or property manager. They are responsible for the installation and maintenance of the INTRATONE access control system.
For general inquiries about INTRATONE products, you may visit the official INTRATONE website or contact their customer service department. (Specific contact details are not provided in the product information.)
Image: A graphic with a QR code and the text "BESOIN D'INFORMATIONS SCANNE MOI" (Need Information Scan Me), suggesting scanning for more details. This QR code likely links to the DOMOBIP website or a similar information portal.
